Should you release the handbrake or shift to first gear first when starting in Subject 2?

1 Answers
Vargas
07/30/25 7:09am
Shift to first gear before releasing the handbrake. Below is a detailed introduction about the Subject 2 test: 1. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skill test. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions also include a sixth item: high-speed toll card collection. 2. Teaching objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently grasp the basic methods of field and road driving within the test area, and have the ability to reasonably use vehicle control components and correctly control the vehicle's spatial position, accurately controlling the vehicle's driving position, speed, and route.
Was this review help?
7
1
Share
More Forum Discussions

How to Make a Car Undrivable?

To prevent a car from starting, it's incredibly easy—there are numerous methods! For instance, tampering with the wiring is straightforward. Take the ignition coil, which typically has two wires: simply cut one and reroute it to a hidden switch only you know about. When starting the car, you flip the switch, but others remain unaware of this trick. There are many other approaches—anything related to the ignition system can be manipulated, such as the starter motor wiring, etc. Alternatively, install a GPS with an automatic fuel/power cutoff function. If you don’t want to lend the car, it’s guaranteed to stall within a few dozen meters, forcing the driver to call you obediently.
20
3
Share

How Many Kilometers Can a Full Tank of Gas Last?

For private cars, the distance a full tank of gas can cover varies significantly among different models, primarily depending on the vehicle's displacement and fuel tank capacity. A car with a 2.0L displacement typically consumes around 10 liters of fuel per 100 kilometers. With a fuel tank capacity of 60-70 liters, it can cover approximately 600-700 kilometers based on these figures. Considering factors such as load-bearing efficiency, installation space, displacement, and fuel consumption, most cars are designed with a fuel tank capacity that allows for about 500 kilometers of mixed driving conditions. Generally, cars with a 1.6-1.8L displacement have fuel tanks ranging from 40-50 liters, while those with 2.0-2.4L displacement have tanks around 50-60 liters. For a 1.6L displacement car, a full tank can last about 300-400 kilometers in pure urban driving conditions, whereas it can cover over 600-700 kilometers in suburban or highway driving.
3
0
Share

Can a tire still be used if there is a cut on the sidewall?

Tire sidewall damage is recommended to be replaced promptly. Because the sidewall of the tire is relatively weak, if the sidewall is damaged, it is almost impossible to repair. Continuing to use it poses a risk of tire blowout and safety hazards. Conditions requiring tire replacement: From the perspective of tire usage timeline, the sidewall of the tire will have a four-digit number indicating the manufacturing date of the tire, with the first two digits representing the week and the last two digits representing the year. Generally, tires should not be used for more than 3 years or exceed 60,000 kilometers in mileage. Although slightly exceeding the time and mileage may not be a major issue, the low temperatures in winter and rainy conditions in summer can significantly reduce the tire's wet grip and dry handling performance. Pay attention to the tire sidewall: As the tire rubber gradually ages, deep cracks may appear on the sidewall. However, as long as the sidewall has not been impacted and the cords are not broken, the tire can continue to be used. The triangular mark on the tire sidewall can help the owner locate a protrusion in the tread groove to determine the actual wear limit of the tire, which should be greater than 1.6 millimeters. Daily precautions: Increase awareness of tire safety. Regularly inspect tires, especially before driving on highways. Conduct thorough and detailed checks, including not only tire pressure but also observing whether there are cracks on the sidewall and the condition of tread wear. Address any potential hazards promptly. Regularly correct wheel balance. Excessive wheel imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repair, dynamic balance testing and adjustment should be performed. The single-side dynamic balance test value should be less than or equal to 40 grams. Regularly rotate tires. To ensure even wear on all tires of the same vehicle, perform tire rotation every 5,000 kilometers and wheel alignment every 5,000 to 10,000 kilometers to avoid abnormal excessive tire wear. Do not install tires of different models or with significant differences in wear on the same axle.
17
0
Share

How to turn on the headlights of Haval H2?

Haval H2 headlights activation method: Align the arrow on the light switch with AUTO for automatic light control. The Haval H2 uses a stalk-type light control - rotating to the indicated position activates the corresponding lights. Methods for turning on: - Parking lights, low beams, and position lights: Rotate the knob at the end of the stalk forward by one notch - High beams: When the knob is in the low beam position, push the stalk forward to activate high beams The Haval H2 is a compact SUV with dimensions of 4335mm (length) × 1814mm (width) × 1710mm (height) and a 2560mm wheelbase. All variants are equipped with a 1.5L turbocharged engine, paired with either a 6-speed manual or 7-speed dual-clutch transmission.
18
3
Share

Can a car still be driven on the road if its annual inspection has expired?

If the annual inspection has expired, the car cannot be driven on the road. According to the "Road Traffic Safety Law," traffic police can impose a fine of 200 yuan and deduct 3 points from the driver's license, and the vehicle may also be temporarily impounded. The annual inspection of a motor vehicle is based on the registration date on the vehicle's license. The inspection can be conducted up to 90 days in advance. The next annual inspection is not based on the inspection date but still on the registration date on the vehicle's license. If a vehicle fails to obtain the inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period, it must be forcibly scrapped. Taking private cars as an example, according to regulations, vehicles used for less than 6 years are exempt from annual inspections. After the 6-year exemption period, only two on-site inspections are required within 10 years, specifically in the 6th and 8th years. For private cars older than 10 years, the original inspection cycle still applies: once a year for vehicles aged 10-15 years, and once every six months for vehicles older than 15 years. If a vehicle is involved in an accident without undergoing the required annual inspection, the insurance company will not provide compensation. According to the "Motor Vehicle Third-Party Liability Insurance Clauses," the insurer is not liable for compensation if the insured vehicle is not inspected as required or fails the inspection, or if the vehicle does not possess a valid license at the time of the accident. In other words, the insurance contract only applies to qualified and legal vehicles. In addition to refusing compensation for accidents involving vehicles that have not undergone timely annual inspections, insurance companies will also deny claims for lost vehicles under the same circumstances.
19
0
Share

How to Install a License Plate on a Car?

Method for installing a license plate on a car: 1. Prepare the car license plate to be installed and the corresponding tools: a riveting tool, a Phillips screwdriver, a pack of license plate fasteners, two small screws, and two rivet nuts; 2. Take out the rivet nuts and the riveting tool, and first install the rivet nuts onto the riveting tool; 3. Use the riveting tool to rivet the rivet nuts onto the car's bumper; 4. Press firmly in the middle, then remove the riveting tool, thus securing the rivet nuts onto the bumper; 5. Take out the car license plate, first align it by hand, ensuring the left and right distances are as equal as possible to guarantee symmetry; 6. Take out the Phillips screwdriver and the installed license plate fasteners, use the Phillips screwdriver to fix the license plate fasteners onto the four holes on the license plate, securing the plate to the bumper; 7. Take out the caps from the license plate fasteners and press the four caps onto the license plate fasteners.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.