Should You Press the Clutch or Brake First When Stopping on a Slope Start?

What does the autohold button in a car mean?

The autohold button in a car refers to the automatic parking function. Autohold is an intelligent electronic parking brake of the vehicle, which is a function within the braking system. After the vehicle comes to a stop, it automatically engages the parking brake to ensure safety, and lightly pressing the accelerator will automatically release the parking brake effect. When the vehicle reaches a certain speed and brakes, if the vehicle comes to a complete stop and the brake pedal is held down for 1-2 seconds, the engine will automatically shut off. When the brake pedal is released and the accelerator pedal is pressed, the engine will automatically start again. This function is often used when waiting at traffic lights to reduce engine idle time, emissions, and carbon buildup. The conditions for activating the autohold function are: the engine must be in working condition (started); the ESP system must be turned on; the driver's seatbelt must be fastened; and the driver's door must be closed. All four conditions must be met to activate the autohold function. If any of these conditions change, the autohold function will automatically turn off. This function is usually configured together with the electronic parking brake and is not enabled by default; it needs to be manually activated. The automatic parking system is a function that can achieve an automatic parking brake. The basic working principle of the automatic parking system is that the brake management system operates the four-wheel brakes based on the extended functions of the electronic parking brake. The technical role of the automatic parking function is to prevent the vehicle from rolling backward, which is particularly useful on slopes and during frequent starts and stops. The automatic parking system and the electronic parking brake (officially known as the electro-mechanical parking brake) can together form an intelligent braking control system, integrating temporary braking during driving and long-term braking after parking, and achieving parking braking through electronic control. The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical parking brake, both relying on the friction generated between the brake disc and brake pads to control parking braking, except that the control method has changed from a mechanical parking brake lever to an electronic button. In terms of functionality, the braking control system extends from the basic parking function to the automatic parking function. For some manual cars, the computer will determine the vehicle's needs based on actions such as pressing the clutch, shifting to neutral, and pulling the parking brake, thereby shutting off the engine. When the clutch is pressed again, the engine will start. However, on congested roads, when moving forward slowly, or when reversing into a parking space, or on steep slopes, you can choose to turn off this function. When driving through water, be sure to remember to turn off this function, otherwise water may enter the exhaust pipe and then the engine, causing the engine to fail to start.

8

5

Share

What does it mean when the VSC light comes on in a Reiz?

VSC light illumination indicates a malfunction in the vehicle stability control system. Here are the relevant details: 1. If the VSC light is orange with an "OFF" indicator below it, it means the vehicle stability control system was accidentally turned off. When both the VSC light and the check VSC warning light with an exclamation mark illuminate simultaneously, it may indicate a fault in the vehicle stability control system. The engine light may come on due to poor fuel quality or carbon buildup in the cylinders. 2. VSC (Vehicle Stability Control) is a system that automatically integrates control of TRC (Traction Control System), yaw rate sensor, skid sensor, wheel speed sensor, and G-sensor during aggressive maneuvers such as oversteering, understeering, or obstacle avoidance.

19

5

Share

How to Turn on the Heating in a BMW Car?

To turn on the heating in a BMW car, follow these steps: 1. First, turn the knob below the air vent to the red position. 2. Then, increase the temperature and select an appropriate fan speed. Set the air circulation to external circulation for about 3 minutes to expel the cold air inside the car and bring in fresh air from outside. 3. Switch the air circulation to internal circulation, adjust the fan speed and direction, set the air conditioning to a suitable gear, and adjust the air vent direction. Generally, the warm air should blow forward and toward the feet. Here is some additional information about car heating: 1. Do not press the AC button when using the heating. The AC button is the cooling switch for the car's air conditioning. Pressing the AC button engages the compressor clutch, causing the engine to drive the compressor, which continuously compresses refrigerant and delivers it to the evaporator. 2. The car's heating system utilizes the engine's heat. The principle of car heating is very simple: during heating, high-temperature coolant from the engine flows through the heater core, and the air blown by the fan passes through the heater core, allowing warm air to be blown out from the air vents.

11

1

Share

What engine is installed in the Dongfeng Fengshen AX7?

Dongfeng Fengshen AX7 uses a total of three engines. The following are the detailed specifications of the three engines: 1. The 1.6L turbocharged engine delivers 170 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 to 4500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with a 6-speed automatic transmission. 2. The 1.5L turbocharged engine delivers 150 horsepower and a maximum torque of 230 Nm. This engine reaches its maximum torque between 1800 to 4000 rpm and its maximum power at 5500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with a 5-speed manual transmission. 3. The 1.4L turbocharged engine delivers 150 horsepower and a maximum torque of 220 Nm. This engine reaches its maximum torque between 1750 to 4000 rpm and its maximum power at 15000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with a 6-speed automatic transmission.

16

1

Share

Where is the water temperature gauge of the Bestune X40?

The Bestune X40 does not have a separate water temperature gauge dial. Instead, it is displayed on the instrument panel and can be accessed by pressing the button at the end of the wiper lever switch. More details are as follows: 1. The water temperature gauge in a car is usually marked with the letters C and H, or distinguished by white and red zones. C stands for cold, and H stands for hot. If the water temperature gauge approaches the H or the red danger zone, and the water temperature warning light comes on in severe cases, it indicates that the engine coolant temperature is too high. The water temperature gauge ranges from C to H, where C represents 60 degrees Celsius. Once the needle reaches C, it means the water temperature has reached 60 degrees. The H red zone represents 110 degrees. The needle should ideally stay in the middle position. If it enters the red zone, the water temperature is too high. 2. Prolonged high water temperature can lead to "boiling over," where the engine coolant boils, potentially causing the radiator to burst and the engine to overheat and sustain damage. While high engine water temperature is harmful, low engine water temperature also has disadvantages, such as incomplete combustion of the air-fuel mixture, reduced power, poor lubrication, and excessive emissions.

19

3

Share

What Brand is the Hanteng Engine?

Hanteng's 1.5T engine is from SAIC General Motors, while the 2.0T engine is from Shenyang Aerospace Mitsubishi. Below is a detailed introduction to Hanteng engines: 1. Hanteng has planned multiple engines including 1.5L, 1.2T, 1.5T, 1.8T, and 2.0T. Among them, the 1.2T engine is a three-cylinder engine jointly developed with the German Mahle Group, featuring high and low power versions. The high-power version has parameters of 120kW and 286Nm, comparable to many current 2.0T engines. 2. Hanteng vehicles are equipped with SAIC's 1.5T engine paired with a 5-speed manual transmission, as well as the 2.0T engine from Shenyang Aerospace paired with a 5-speed manual and 6-speed dual-clutch transmission. These two engines have been adopted by numerous models, including the Roewe 350, Zotye T600, and Landwind X7.

4

Share

Should You Press the Clutch or Brake First When Stopping on a Slope Start?

What does the autohold button in a car mean?

What does it mean when the VSC light comes on in a Reiz?

How to Turn on the Heating in a BMW Car?

What engine is installed in the Dongfeng Fengshen AX7?

Where is the water temperature gauge of the Bestune X40?

What Brand is the Hanteng Engine?

How to Reset the Maintenance Light on a 2012 Chevrolet Cruze?

What engine is installed in the Changan CS75?

Where is the cabin air filter located in an Audi A4?

How to Open the Front Hood of Wuling Hongguang?