···
Log in / Register

Should You Make a U-Turn Before or After the Pedestrian Crossing?

4 Answers
JaceRose
09/05/25 7:09am

Make a U-turn after the pedestrian crossing. Here is some additional information about making U-turns: 1. Check roadside signs for U-turns: Observe whether U-turns are allowed or not ahead. There are usually traffic signs 150,000mm to 200,000mm before an intersection indicating whether U-turns or left turns are prohibited. If no prohibition signs are visible, U-turns are permitted. 2. Avoid crossing lines during U-turns: On urban roads, divided dual-lane roads mostly have single or double yellow lines. If the lines remain solid all the way to the intersection, you must not cross the solid line to make a U-turn. Crossing the solid line for a U-turn will be considered a violation of traffic rules.

Was this review help?
1
0
Share
LaLogan
09/17/25 7:25am

I've been driving for over twenty years, and U-turns are something that really require attention. You're asking whether to do it before or after the crosswalk? Simply put, you should make the U-turn after the crosswalk—that means driving past the pedestrian crossing first before turning the steering wheel. Crosswalks are for pedestrians, and stopping a car there is just asking for trouble! I've seen beginners making U-turns on the crosswalk, nearly hitting pedestrians who then jumped in fright. The correct approach is to slow down when approaching the intersection, observe pedestrian traffic, ensure it's safe, then drive past the zebra crossing before making a full turn with the steering wheel. Never cut corners by turning directly on the crosswalk—it's both unsafe and against the rules. Remember, safety always comes first when driving; don't take risks just to save time.

Was this review help?
4
0
Share
Expand All
StLincoln
10/31/25 7:56am

Having taught driving for over a decade, students often make mistakes about the position for U-turns. Before or after the crosswalk? It must be after the crosswalk! The correct approach is to have the vehicle completely pass the crosswalk before initiating the turn. Crosswalks are pedestrian safety zones, and occupying them with a vehicle is not only illegal but also dangerous. I've seen too many students in a hurry, turning the wheel as soon as the front of the car passes the crosswalk, leaving the rear stuck on the zebra crossing. This can obstruct pedestrian traffic and risk scraping roadside facilities. Remember three steps in practice: first, observe the traffic lights and pedestrian situation; after confirming it's safe, steadily cross the zebra line to reach a safe area before turning. Developing good habits is key to safe driving.

Was this review help?
17
2
Share
Expand All
StElle
12/14/25 8:04am

When I first got my driver's license, I couldn't tell where to make a U-turn either. The instructor repeatedly emphasized that U-turns must be made after the crosswalk, meaning you need to drive past the pedestrian crossing before turning. At first, I couldn't get the distance right during practice. Once, I almost stopped on the zebra crossing and only realized my mistake when the instructor pointed it out. Later, I understood that stopping and turning are prohibited in the crosswalk area. Now, every time I make a U-turn, I pay extra attention: I slow down when approaching an intersection and only start turning the steering wheel after the front of my car has completely passed the white zebra crossing. This way, I follow traffic rules and ensure safety without affecting pedestrians crossing the street. Driving is something you really can't be careless about.

Was this review help?
11
0
Share
Expand All
More Forum Discussions

Do You Need to Press the Brake When Shifting to N Gear in an Automatic Car?

Shifting to N gear in an automatic car does not require pressing the brake. If you encounter a long red light while waiting, you should shift to N gear without pressing the brake and directly engage the handbrake. However, on uphill sections, it is recommended to press the brake for safety to prevent the car from rolling back. Below is some related information about automatic transmission cars: 1. Transmission Types: There are mainly two types of automatic transmissions used in cars. One is the stepped automatic transmission, and the other is the continuously variable transmission (CVT). The most commonly used in passenger cars is the mechanical continuously variable transmission, which uses a V-shaped metal belt or chain to transmit torque between the driving and driven pulleys. This type of transmission is usually used in smaller vehicles. 2. Operational Characteristics: In modern automatic cars, the driver only needs to control the accelerator pedal. The computer analyzes signals from sensors that detect the engine throttle opening and vehicle speed, automatically controlling the gear shifts or engaging different gears. Generally, automatic transmissions may result in some loss of engine power.
14
1
Share

What are the differences between National IV and National V standards?

National IV and National V standards differ in the following aspects: 1. Different emission standards: Compared to National IV, National V has stricter emission standards, resulting in fewer pollutants emitted and being more environmentally friendly. 2. Different control systems: National V mainly features more complex emission control systems compared to National IV, leading to increased costs. 3. Different pollution levels: To further reduce photochemical pollution caused by gasoline evaporation emissions and decrease deposits in car engine intake systems, the olefin content has been reduced from 28% in the fourth stage to 24%. 4. Different evaporation properties: The saturated vapor pressure of National IV gasoline ranges from 42 to 85, while that of National V gasoline ranges from 45 to 85.
13
0
Share

What are the penalties for overtaking over double yellow lines in a car?

Normally, a fine of 200 yuan and penalty points will be imposed. The specific penalties should be determined based on on-site photos and the judgment of the traffic police department. Below is a detailed introduction regarding overtaking over double yellow lines in a car: 1. Overview: Double yellow lines are a common traffic marking on roads, consisting of two parallel solid yellow lines. Double yellow lines are usually placed in the middle of roads without a central divider, separating opposite traffic directions and dividing inbound and outbound vehicles with ground markings. 2. Crossing the line: Under normal circumstances, civilian vehicles are not allowed to cross this line. Some roads with only simple small guardrails may also have double yellow lines. When the double yellow lines are broken, vehicles can turn or make a U-turn at the break in the double yellow lines, provided other traffic signs permit.
8
4
Share

What is the Difference Between Full-Speed Adaptive Cruise Control and Regular Cruise Control?

Adaptive cruise control, compared to regular cruise control, offers a higher level of automation and better adaptability to road conditions. Adaptive cruise control is also known as active cruise control. The system mainly includes radar sensors, an ECU, and its execution module. When in use, the driver only needs to set the desired speed, and the system will then use radar and infrared beams to determine the position of the vehicle ahead, ultimately sending signals to the engine to execute braking or acceleration. Adaptive cruise control has a wide range of applications, including urban congested roads and highways. Below is a related introduction: The function of regular cruise control is to allow the driver to maintain a set speed without needing to press the accelerator pedal to adjust the speed, enabling the car to move forward at the predetermined speed. During the operation of regular cruise control, regardless of changes in road slope or wind resistance, the car's speed remains unchanged. Its main application scenarios are highways and closed roads. It is not very suitable for stop-and-go urban traffic conditions. Similarly, it is not suitable for rainy or snowy weather.
12
3
Share

What does a wrench symbol in the car light indicate?

The "small wrench" warning light reminds the owner to perform scheduled maintenance based on mileage requirements, as it's part of the maintenance reminder function setup. Relevant knowledge is as follows: 1. Concept: Car maintenance refers to the periodic preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain components of the vehicle. 2. Maintenance scope: Modern vehicle maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose: The objectives of car maintenance are to maintain vehicle cleanliness, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down deterioration processes, and extend the service life.
15
0
Share

Can You Ride a Motorcycle on the Highway?

Highway riding is permitted for motorcycles, as their speed generally exceeds 70 kilometers per hour. However, specific policies depend on local traffic regulations, as traffic conditions vary across different provinces and cities in China, requiring case-by-case analysis. Here are some precautions for highway motorcycle riding: 1. Obey traffic laws: Adhere to highway regulations, avoid speeding, and refrain from unnecessary lane changes. 2. Maintain safe distance: Motorcycles inherently have weaker braking capabilities than cars, so it's crucial to keep a safe distance from the vehicle ahead. 3. Check vehicle condition: Before entering the highway, inspect your motorcycle to ensure the braking system functions properly, tire pressure is correct, and tires maintain sufficient traction.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.