Should You Fasten the Seat Belt or Scan ID First in Subject 2?

2 Answers
NadiaLee
07/24/25 8:45pm
After getting into the car, fasten your seat belt first. Then scan your ID, input your fingerprint, and wait for the test to begin. Preparation steps before starting: First, check if the car is in neutral, if the handbrake is engaged, if all lights are turned off, adjust the seat and mirrors, and fasten the seat belt. Only then scan your ID. After hearing the voice announcement "Subject 2 test begins," you can start the engine. If the car is not turned off when you get in, you must turn it off first. Correct starting method for Subject 2: Check if the gear lever is in neutral; start the engine, press the clutch with your left foot, shift into first gear, and simultaneously press the brake with your right foot; turn on the left turn signal, honk the horn, and release the handbrake; slowly lift the clutch with your left foot until you feel the vehicle start to vibrate, then stop lifting; gradually release the foot brake, and once the vehicle starts moving forward, you can fully release it; at this point, keep your left foot at the semi-engaged position, and the Subject 2 start is successful.
Was this review help?
14
5
Share
DeKayden
08/11/25 11:16am
I remember on the day of taking the Subject 2 test, as soon as I got in the car, I immediately fastened my seatbelt, thinking it would protect my safety in case there was an issue with starting the car and I wouldn’t have to worry about falling. Then, I fumbled to swipe my ID card, and the test equipment started timing only after it beeped. Later, when talking about it, the instructor praised me for having strong safety awareness. He said the test rules didn’t actually specify swiping the ID card first, but fastening the seatbelt couldn’t be too late, or points would be deducted if the examiner noticed. I think safety first, then starting is more reliable, after all, safety always comes first when driving. Adjusting the seat and mirrors is also important. I would first get into position, then fasten the seatbelt, and finally swipe the ID card. The test process varies slightly from place to place, so it’s best to ask the instructor more to avoid disrupting the sequence and affecting your performance. Developing safety habits is very beneficial for future driving—don’t just focus on swiping the card and forget basic protection.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How many liters does it take to fill up a Civic's fuel tank?

The fuel tank capacity for all Civic models is 47 liters when completely filled. The vehicle's engine features a turbocharged intake system, with a MacPherson strut front suspension and front-wheel drive configuration. Among vehicles in the same class, the Xingrui 2021 2.0TD Elite model has a fuel tank capacity of 50 liters, while the Sagitar 2022 200TSI Manual Flyover Edition also has a 50-liter fuel tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This occurs because automakers specify tank capacity from the tank bottom to the safe fill level, leaving additional space between this level and the tank opening. This safety margin accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled to the tank opening during refueling, the actual fuel quantity may exceed the specified tank capacity. To check remaining fuel levels, owners can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, fuel is nearly depleted; near F indicates sufficient fuel supply.
12
4
Share

What are the advantages and disadvantages of a three-cylinder engine?

Here is an introduction to the advantages and disadvantages of a three-cylinder engine: I. Advantages of a three-cylinder engine: 1. Lower fuel consumption and reduced carbon emissions, contributing to energy conservation and emission reduction. A three-cylinder engine has one less cylinder than a four-cylinder engine, resulting in less air intake and reduced fuel injection, leading to lower fuel consumption. 2. Less energy loss. Compared to a four-cylinder engine, one less cylinder means fewer mechanical components, reducing energy loss caused by mechanical friction. Both heat transfer loss and friction loss are generally lower than in a four-cylinder engine. 3. Compared to a four-cylinder engine, under similar displacement, energy loss is smaller, and the efficiency of each cylinder is higher. 4. Lighter weight, smaller size, and space-saving, making the engine layout more reasonable. II. Disadvantages of a three-cylinder engine: 1. Engine vibration and shaking, with significant noise. Vibration can be considered a fatal flaw of odd-numbered cylinder engines. Due to the different working mechanism of a three-cylinder engine compared to a four-cylinder engine—where a three-cylinder engine operates with two up and one down or one up and two down—this results in an inherently unbalanced working state, whereas even-numbered cylinders can neutralize this reciprocating inertia force. 2. Inconsistent power delivery. In a four-cylinder engine, the working angle between cylinders is 60 degrees, while in a three-cylinder engine, the adjacent working angle between each cylinder is 90 degrees. Due to the larger inclination angle, the piston movement is unbalanced, causing the entire motion process to be intermittent.
1
1
Share

Reasons for the BMW X3 Electric Fan Continuously Running at High Speed

For the situation where the BMW X3 electric fan continuously runs at high speed, it is necessary to check whether the temperature sensor is functioning properly. Under normal circumstances, the fan will rotate for a period after the engine is turned off, but it should not run continuously. Reasons for the electric fan running continuously: Engine overheating due to insufficient coolant, causing the electric fan to run continuously; radiator leakage leading to engine overheating; loose or damaged hoses causing coolant leakage, resulting in continuous fan operation; thermostat failure causing the temperature to reach the threshold. Solutions: Check if the connector functions properly - whether there are any fitting issues - correct any deformed metal parts of the connector - secure the connector connection with insulating tape.
2
0
Share

What are the penalties for drunk driving?

The penalties for drunk driving are: 1. Driving a motor vehicle after consuming alcohol will result in a six-month suspension of the motor vehicle driving license and a fine; 2. If a driver is penalized for drunk driving and repeats the offense, they will face up to ten days of detention, a fine, and revocation of their motor vehicle driving license; 3. For driving under the influence of alcohol (DUI), the traffic management department of the public security authority will restrain the driver until sober, revoke their motor vehicle driving license, hold them criminally liable, and prohibit them from obtaining a new driving license for five years; 4. Driving a commercial motor vehicle after consuming alcohol will result in fifteen days of detention, a fine, revocation of the motor vehicle driving license, and prohibition from obtaining a new driving license for five years.
7
1
Share

What are the penalties for novice drivers on highways?

Novice drivers driving alone on highways will be fined and ordered to exit the nearest highway; those preparing to enter the highway will be educated and advised to turn back. According to the regulations on the application and use of motor vehicle driving licenses, the first 12 months after a motor vehicle driver initially obtains a license or adds a permitted vehicle type is considered the probationary period. During this probationary period, if a driver operates a motor vehicle on a highway, they must be accompanied by a driver who has held a corresponding or higher-level driving license for more than three years. Before setting off, vehicle owners must thoroughly inspect their vehicles, including tire pressure, coolant, brakes, etc. Unlike ordinary roads where parking is flexible, accidents on highways not only waste time but also increase personal danger.
7
0
Share

What should be noted when charging a new electric vehicle battery for the first time?

Precautions for the first charge of a new electric vehicle battery: Do not ride until the battery is completely drained before charging. Generally, the battery level of a new electric vehicle will not be too high or too low. When the battery level indicator shows the last bar, you can prepare to charge; Choose to charge during the day. Charging at night can easily lead to overcharging, which may damage the battery. Charging during the day makes it easier to control the charging time; Ensure the first charge takes 5 to 6 hours to fully charge; When charging the electric vehicle for the first time in summer, the charger may heat up quickly. Do not place the charger on objects prone to heat or combustion, nor on the seat of the electric vehicle to prevent fire.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.