Should You Call the Police If Your Car Breaks Down on the Highway?

1 Answers
SanLiam
07/29/25 1:41pm
If your car breaks down on the highway, you can call the police or dial 122 for road rescue. Here are some precautions to take when your vehicle breaks down on the highway: 1. Turn on the hazard lights: If your vehicle is unable to move due to a malfunction or accident and cannot leave the driving lane, immediately turn on the hazard warning lights and set up a warning sign 150 meters behind the vehicle. At night, also turn on the width marker lights and taillights. 2. Emergency avoidance: If your car breaks down on the highway and requires repairs, even if you are repairing it on the shoulder or in the parking lane, it is not absolutely safe. The driver should remain vigilant and take emergency avoidance measures immediately upon noticing any danger, moving to the safe area outside the guardrail on the shoulder. When returning to the driving lane after repairs, first accelerate on the emergency parking lane, turn on the left turn signal, and then merge into the driving lane without obstructing other normally moving vehicles.
Was this review help?
7
1
Share
More Forum Discussions

Volkswagen Wheel Bolt Torque

Volkswagen wheel bolt torque is generally appropriate between 100 to 120 Nm. The direction for tightening and loosening wheel bolts is: clockwise to tighten, counterclockwise to loosen. Wheel bolts refer to the screws installed on the hub that connect the wheel, brake disc, and hub, serving to join the wheel, brake disc, and hub together. Tires are circular elastic rubber products mounted on various vehicles or machinery, designed to roll on the ground. When mounted on metal rims, they support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain the vehicle's driving performance. The functions of tires include: working together with the vehicle suspension to mitigate shocks encountered during driving, ensuring good ride comfort and smooth driving, maintaining excellent adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and off-road capabilities, and bearing the weight of the vehicle.
8
5
Share

What to Do If You Turn the Steering Wheel Too Early or Too Late When Reversing into a Parking Space?

If you turn the steering wheel too early when reversing into a parking space, control the speed well and avoid going too fast. Observe the rear wheels in the side mirrors, correct the steering half a turn at a time, and make slight adjustments after straightening the wheels. Then, proceed to reverse into the spot at the designated point. If you turn the steering wheel too late, and the distance to the upper right corner of the parking space is too far, immediately check the left side mirror. Once the left rear wheel enters the space beyond the upper left corner, straighten the wheels and continue turning left. When the car body is almost aligned but not yet straight, straighten the wheels to complete the parking. Below are detailed steps for reversing into a parking space: 1. Identify the starting point: For a right-side reverse, ensure the car is 1.2-1.8 meters away from the left line at the starting position, with the front wheels straight and the car body parallel to the left line. When reversing, use the lower edge of the left side mirror as a reference. When the two align, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Watch the right side mirror. When you spot the corner of the parking space, monitor the distance between the corner and the car body. If the distance is less than 30 cm, turn the steering wheel back half a turn and continue reversing. Once the car body enters the space and aligns with the parking lines, turn the wheel back one full turn. If the distance is not less than 30 cm, do not adjust the steering wheel and continue reversing until the car body aligns with the parking lines, then turn the wheel back one and a half turns at once. 3. Align the stopping point: The stopping point is where you park after entering the space. The reference method is the same as the starting point. When the lower edge of the left mirror aligns with the shoulder line of the parking space, stop the car.
11
5
Share

Does Castrol not have 0w20 engine oil?

Castrol does have 0w20 engine oil and it is fully synthetic. The base oil quality of 0w series is generally good. It is quite suitable for high-precision engines in Japanese, American, and Korean vehicles that don't require high high-temperature shear resistance. The downside of 0W-20 grade oil is that it's relatively thin and not suitable for all vehicles. If the kinematic viscosity of this grade's oil is too low, it may lead to oil burning. It has excellent low-temperature performance, capable of smooth startup even at -35°C. Fully synthetic oil has a higher viscosity index compared to conventional mineral oil. With the same oil film requirements, synthetic oil can achieve the target with lower viscosity, whereas mineral oil requires relatively thicker viscosity. Moreover, fully synthetic oil shows minimal viscosity changes with temperature variations, thus maintaining appropriate viscosity in both high and low temperatures to provide proper engine protection. Under the same working conditions, fully synthetic oil also lasts much longer than mineral oil, which is why some oils claim to have a 10,000 km change interval.
11
2
Share

What is the button at the bottom of the accelerator pedal in a Mercedes-Benz C-Class?

This button is the forced downshift switch, which automatically triggers the downshift function when the accelerator pedal is fully depressed for acceleration. Through the computer's calculation, it automatically downshifts by 1 or 2 gears from the current gear, resulting in higher engine RPM and greater torque output, thereby enabling rapid acceleration or overtaking. The English name for this button is "kickdown". Using "Kickdown" results in an extremely aggressive response from the car. Theoretically, this method of rapidly downshifting to significantly increase torque can instantaneously improve vehicle acceleration, making it theoretically feasible for overtaking. However, nothing is absolute. Some automatic transmission models have a very sluggish "Kickdown" design. Even if the "Kickdown" button is triggered by fully depressing the accelerator, there is a lag in response time. For such models, using "Kickdown" for overtaking is clearly less effective than simply applying heavy throttle without triggering the Kickdown mode.
13
0
Share

How to Determine if a Used Car is an Accident or Flood-Damaged Vehicle?

To determine whether a car has been involved in an accident, you need to inspect the paint on the body panels and the welding points and paint on the car's frame. Here are the specific details: 1. Key Inspections: To determine if a car has been flooded, check the carpets, seats, steering column, and screws inside the car. Also, check if the electronic systems have been extensively replaced. If a car has been flooded, the electronic systems will be damaged and likely replaced. 2. Understanding Accident Vehicles: To identify an accident vehicle, you need to understand what constitutes one. If only the body panels have been scratched or collided with, the car is not considered an accident vehicle. If the car's frame has been damaged, then it is classified as an accident vehicle. 3. Car Frame: A car's body consists of the frame and the body panels. The body panels include the front and rear bumpers, doors, front fenders, engine hood, and trunk lid. After removing all the panels, what remains is the car's frame. Since the roof and rear fenders are welded to the frame, they are also considered part of the frame. The car's frame has original paint and welding points. If the frame has been repaired, the original welding points and paint will be altered.
13
3
Share

How to Switch from Trip to Normal Mileage?

To switch from trip to normal mileage, you need to press the vehicle's one-touch start button to activate the engine; otherwise, the switch cannot be made. Below are the specific steps: 1. Mileage Reset: In the single-trip mileage display mode, press and hold the reset/adjustment button 'set' for more than two seconds to reset the single-trip mileage (trip meter) display value to zero. However, the total mileage in 'TOTAL' mode cannot be reset unless the engine is replaced. 2. Trip Kilometer Calculation: The basic function of the TRIP locator server is to exchange information with other LS. This information includes the reachability of the call destination, paths between destinations, and gateway information on the path to the call destination in the PSTN. LS exchanges sufficient routing information to construct an ITAD connectivity graph, thereby avoiding routing loops. Additionally, TRIP can be used to exchange required attributes to implement policies and select routes based on path or gateway characteristics. This specification defines TRIP's transmission and synchronization mechanisms, finite state machines, and TRIP data, as well as basic attributes.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.