Should Volkswagen 1.4T use 5W30 or 40?

1 Answers
DylanRose
07/30/25 4:47am
Volkswagen 1.4T should use 40. Compared to 5W30, 40 oil has higher high-temperature viscosity and better sealing performance, but its fluidity is relatively poorer with greater resistance. Here are some precautions for oil usage: 1. Oil quantity: The oil level should be slightly below the mark on the dipstick, do not overfill. Excessive oil not only increases the rotational resistance of the crankshaft but also reduces the engine's output power. Moreover, the excess oil may enter the combustion chamber and participate in combustion, leading to oil burning, blue smoke emission, and increased fuel consumption. 2. Oil selection: Choose oil with different viscosities based on the engine's operating condition. If the engine is in good condition and the seasonal temperature is low, oil with lower viscosity should be used. If the engine is severely worn and the seasonal temperature is high, oil with higher viscosity should be selected.
Was this review help?
8
5
Share
More Forum Discussions

What is the function of the button on an automatic transmission?

The function of the button on an automatic transmission: The button on an automatic transmission is called the shift lock button, also known as the gear lock. If the gear is accidentally engaged, unintended forward or backward movement could cause an accident. This button can eliminate safety hazards caused by misoperation. When shifting out of P (Park) or into R (Reverse) or P (Park), this shift lock button must be pressed to engage the gear. Introduction to automatic transmission gears: 1. P stands for Park; after the car stops, engaging P gear applies the brake to prevent movement. 2. N stands for Neutral; temporarily stopping the vehicle by engaging this gear stops the vehicle's motion without interrupting power. 3. R stands for Reverse; this gear can only be engaged when the vehicle is stationary. 4. S stands for Sport, suitable for overtaking and climbing hills.
16
2
Share

What is a Salvage Car?

Salvage cars refer to vehicles that have suffered damage from non-natural wear and tear accidents, resulting in decreased mechanical performance and economic value. The following scenarios classify a vehicle as a salvage car: 1. Vehicles where the engine compartment or passenger compartment has been damaged due to impact; 2. Vehicles where the rear quarter panel has been damaged by more than one-third due to impact; 3. Vehicles with welded, cut, reshaped, or deformed longitudinal beams; 4. Vehicles with welded, cut, reshaped, or deformed shock absorber mounts; 5. Vehicles with welded, cut, reshaped, or deformed A, B, or C pillars; 6. Vehicles where the airbags have deployed due to impact; 7. Vehicles with severe welding, cutting, reshaping, or deformation in other non-removable parts; 8. Vehicles where the body has been submerged in water exceeding half of its height, or where water has entered the passenger compartment.
14
3
Share

What are the classifications of windshield wipers?

Windshield wipers are divided into beam wipers and conventional wipers. Windshield wipers are important accessories installed on the windshield, and their function is to remove rain, snow, and dust that obstruct the view on the windshield glass. Windshield wipers play a crucial role in driving safety. Windshield wiper maintenance guide: 1. When using the wiper to remove dust from the windshield surface on a sunny day, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn or hard contaminants on the glass, they should be cleaned manually; 3. When lifting the wiper blade during car washing or daily cleaning, hold the spine of the wiper and slowly return it, avoiding snapping the wiper blade back suddenly; 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to avoid increasing the burden on the wiper.
4
2
Share

How to Renew a Driver's License in a Different Location?

Methods for renewing a driver's license in a different location: 1. Go to a photo studio with driver's license photography qualifications to take photos, obtaining a one-inch white background photo without a hat and a digital image collection system receipt; 2. Make a copy of your ID card and bring the original. If you are from another province, also bring your residence permit and a copy of it; 3. Go to the hospital designated by the vehicle management office for a physical examination, verify your ID, submit one photo, and obtain the motor vehicle driver's physical condition certificate to fill out and undergo the physical examination; 4. Go to the vehicle management office to get a number and queue up, receive a driver's license application form, and attach the photo; 5. When your number is called, submit the materials to the police at the vehicle management office, then wait a moment for the review; 6. After passing the review, you will receive a form to pay the fee. After paying, submit the form with the payment stamp back to the police.
17
0
Share

What does intermittent braking mean?

The meaning of intermittent braking is: first press the brake slightly, then release the brake (but not completely) when you feel the car decelerating significantly, and press the brake again when you feel the braking effect is about to disappear. Repeat this cycle. The applicable objects of intermittent braking: mostly used for large vehicles without ABS and with air brakes in the past, but the intermittent braking method will affect the smoothness and comfort of the vehicle. Small cars are lightweight, and if intermittent braking is not used for long downhill slopes, the wheel hubs will not overheat. It is not recommended to use intermittent braking for small cars to decelerate. The reason for using intermittent braking: because large vehicles are heavier, but air brakes respond faster than hydraulic brakes. To avoid locking the wheels and preventing the inability to steer, intermittent braking technique is adopted. The function of intermittent braking is: to prevent wheel lock-up, thereby controlling the vehicle from skidding.
6
2
Share

What are the items included in a vehicle annual inspection?

The inspection includes: checking whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and functional; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced and if they match the initial inspection records; verifying whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles"; inspecting whether the vehicle has been modified, remodeled, or altered, and whether the driving license, license plate, and vehicle registration records match the actual condition of the vehicle, including any changes and whether approval and modification procedures have been completed; checking whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement; for large vehicles, verifying whether the unit name or the name of the street, township, or town where the vehicle is registered, along with the maximum seating capacity in the driver's compartment, are printed in Chinese imitation Song font on both sides of the door as required; for trucks, checking whether the rear tailgate (including the rear tailgate of trailers) displays the vehicle number enlarged 2-3 times as required, and whether the sides of the door for individually or jointly owned vehicles are marked with the word "individual"; the markings must be clear, and unit codes or other patterns are not allowed (special cases require approval from the vehicle management office). Inspection time requirements: small and micro non-commercial passenger vehicles are exempt from inspection for the first 6 years, after which they must be inspected annually; after 15 years, inspection is required every 6 months; commercial passenger vehicles must be inspected annually within the first 5 years, and every 6 months thereafter; trucks and large and medium non-commercial passenger vehicles must be inspected annually within the first 10 years, and every 6 months thereafter; imported vehicles, like other types, can undergo periodic inspections at any testing site. Consequences of failing the inspection: vehicles that fail the annual inspection must be repaired within a specified time limit; if they still fail after the deadline, the vehicle management office will confiscate their driving license plates, prohibiting further use; vehicles that do not undergo inspection without reason or fail the inspection are not allowed on the road and cannot be transferred; vehicles that meet scrapping conditions or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their records canceled, and they will be scrapped.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.