Should vehicles slow down and yield when passing through an intersection without traffic signals?

1 Answers
Bella
07/29/25 7:12pm
When driving through an intersection without traffic signals, it is essential to remain vigilant and reduce speed. Below are relevant guidelines: 1. On straight roads: Vehicles must adhere to designated lanes, with motorcycles staying in motorcycle lanes. 2. At intersections without traffic signals: Drivers must slow down when approaching marked crosswalks and check for pedestrians. 3. Safe following distance: Maintain a safe distance between vehicles at unsignalized intersections. Turning vehicles must yield to through traffic to avoid obstructing the flow.
Was this review help?
10
1
Share
More Forum Discussions

What is the function of the drive axle?

The main functions of the drive axle are as follows: 1. Through the transmission of the main reducer gear, it reduces speed and increases torque; 2. Uses bevel gear transmission to change the direction of torque transmission; 3. Through the differential, it allows the inner and outer wheels to rotate at different speeds to meet the steering requirements of the vehicle; 4. Through the axle housing and wheels, it achieves load-bearing and force transmission. Below is a partial introduction to the drive axle: 1. The drive axle consists of the main reducer, differential, wheel transmission device, and drive axle housing. 2. The drive axle is an important component of the transmission system, responsible for the functions of speed reduction, torque increase, and directional differential.
14
1
Share

What does 'int' mean on a car?

Rain wiper 'int' stands for automatic intermittent wiping function. When the lever is switched to this position, the wipers will operate automatically. Here is some information about the automatic intermittent function of wipers: 1. The automatic intermittent working position of car wipers can adjust the swinging frequency, making the wiper swing frequency vary according to the vehicle speed. 2. When the wiper lever is placed in the 'automatic intermittent swing' position, the wipers will change their swinging frequency according to the vehicle speed based on the adjusted frequency. 3. There are mainly two types of swinging frequency adjustment mechanisms: toggle type and rotary knob type.
5
3
Share

What are the causes of engine misfire?

The following are the causes of engine misfire: 1. Spark plug issues: clogged or damaged; 2. Cylinder wire issues; 3. Ignition coil issues; 4. Fuel injector issues: clogged or low voltage causing DME internal injector data loss; 5. Air-fuel mixture issues; 6. Cylinder pressure issues. The following is an analysis of engine misfire faults: 1. Engine misfire monitoring: To prevent excessive exhaust emissions and thermal damage to the catalytic converter, the engine control unit uses the crankshaft position sensor to monitor deviations in engine rotation speed to determine misfire, and the camshaft position sensor to identify the misfiring cylinder. 2. Classification of engine misfire: Engine misfire can be simply divided into two situations, one is complete misfire, meaning no combustion, and the other is partial misfire, meaning unstable combustion.
13
4
Share

Under What Circumstances Does the Cylinder Head Need to Be Replaced?

Replacement of the cylinder head is necessary when there are cracks or deformation. Below is extended information about the car cylinder head: 1. The cylinder head is the engine's cylinder head: This component is part of the engine's combustion chamber and is crucial to the engine. 2. Deformation or cracks in the cylinder head: These can affect the engine's sealing, leading to air and oil leaks. 3. Most cylinder heads do not develop cracks or deformation: Unless there were manufacturing defects or poor usage by the car owner. 4. Replacing the cylinder head is a major engine overhaul: If the cylinder head needs to be replaced, it should be done at a professional repair shop or 4S store.
19
2
Share

What are the differences between car chassis armor and engine underguard?

Car chassis armor and engine underguard have the following differences: 1. Different physical properties: The scientific name of car chassis armor is car chassis anti-collision, anti-rust, and sound insulation, which is a high-tech adhesive rubber asphalt coating; The engine underguard is not a coating but an engine protection device. The development of engine underguards in China mainly has three stages: hard plastic, resin, iron, and aluminum alloy. 2. Different uses: Car chassis armor can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower fenders, and trunk, forming a strong elastic protective layer after quick drying, which can prevent the impact of flying stones and gravel, and avoid the erosion of moisture, acid rain, and salt on the metal parts of the vehicle chassis; The engine underguard is primarily used to prevent mud from covering the engine, and secondly to prevent damage to the engine caused by uneven road surfaces during driving.
13
2
Share

What is the horsepower of the Changan CX20?

Changan CX20 horsepower: 86 horsepower for the 1.3L model and 101 horsepower for the 1.4L model. More information about the Changan CX20 is as follows: 1. The Changan CX20 is a compact car under the Changan brand, equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.4-liter naturally aspirated engine. 2. The 1.3-liter naturally aspirated engine has a maximum torque of 110 Nm, with a maximum power output at 6000 rpm and a maximum torque range between 3000 to 4000 rpm. 3. The 1.4-liter naturally aspirated engine delivers 101 horsepower and a maximum torque of 131 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.