Should Turning Vehicles Yield to Straight-Going Vehicles When Driving?

2 Answers
VonLilliana
07/25/25 1:17am
When driving, turning vehicles should yield to straight-going vehicles, but not all the time. Vehicles going straight on the auxiliary road must yield to vehicles turning into the main road: Roads are divided into main roads and auxiliary roads. No matter the direction, as long as you are driving on the auxiliary road, you must yield to vehicles on the main road. Some intersections may also have yield signs, so be sure to slow down and not force your way through. When encountering an inverted triangle yield sign on the road: When driving past such signs, you must slow down and yield, waiting for other vehicles to pass before proceeding. If you force your way through and an accident occurs, you will bear full responsibility. Even if you are going straight, you must yield to turning vehicles.
Was this review help?
10
4
Share
VonMaximus
08/10/25 4:04pm
From a safety perspective, it's indeed necessary to yield to through traffic when making a turn. Traffic regulations clearly state this because through vehicles move at higher speeds, and cutting them off during a turn can easily lead to collisions. I've encountered several close calls while driving, fortunately avoiding accidents by yielding in time. Not adhering to this rule is not only dangerous but could also result in being held fully liable for an accident. At intersections or T-junctions, it's crucial to slow down, carefully observe oncoming traffic from both sides, and ensure all through vehicles have passed before turning. Additionally, this rule isn't isolated—it extends to yielding to pedestrians as well. Developing good habits is essential for ensuring driving safety. Extra caution is needed during rain or at night when visibility is poor, relying even more on these rules to stay safe.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What type of specialized question does the point-deduction question belong to?

Point-deduction questions belong to the specialized categories of multiple-choice and true/false questions. Introduction to Subject 1: Questions in Subject 1 are divided into two types: single-choice questions and true/false questions. Point-deduction questions are categorized into deductions of 12 points and 6 points. Many of the questions are quite similar. Subject 1 Tips: When encountering point-deduction questions in Subject 1, if you are still unsure about the techniques, first look at what is being asked at the end of the question. If you really can't remember the method while answering, review the question multiple times, as this will help build some familiarity. For true/false questions, if the number "12" appears, directly choose "true." If the number is not "12," directly choose "false." However, there are three exceptions. Apart from questions involving "running a red light, failing to yield to a school bus, and occupying the emergency lane," these three are marked as "6 points" and are correct.
1
5
Share

How Long Should a Wet Car Key Be Left in Rice?

Car keys must be completely dry before they can be used again after getting wet, which typically takes at least a few days. Here are some methods for dealing with a wet car key: Use a hair dryer on the cold setting: Blow dry the key with a hair dryer on the cold setting—avoid using warm air as the internal circuit board is not suitable for high temperatures. Alternatively, place the key in a thin, breathable bag and then into a container of highly absorbent rice. Wipe the surface: After the key gets wet, first wipe the surface. If possible, open the casing, remove the battery, and use highly absorbent paper towels to dry the internal components.
7
0
Share

How much does a 140 breaker hammer weigh?

140 breaker hammers generally weigh around 1.8 tons. Below is an introduction to breaker hammers: Introduction: Breaker hammers, also known as hydraulic picks or hydraulic guns, derive their power from the pressure oil provided by the pump stations of excavators or loaders. They are more effective in clearing floating stones and soil from rock crevices during the excavation of building foundations. Hydraulic breaker hammers adopt an optimized design concept, increasing the stroke of the piston and cylinder, and using a piston and chisel rod of the same diameter. This ensures the best matching effect between the breaker hammer and the host machine, maximizes the rational use of the highest output energy, saves energy, and achieves the highest work efficiency. The selection principle is based on the excavator model and the working environment to choose the most suitable hydraulic breaker hammer. Classification: According to the operation method, breaker hammers can be divided into two main categories: handheld and machine-mounted. Based on the working principle, they can be classified into three major types: fully hydraulic, hydraulic-pneumatic combined, and nitrogen explosion type.
8
1
Share

Should You Wait Until the Fuel is Completely Used Up Before Refueling Your Car?

You do not need to wait until the fuel is completely used up before refueling your car. It is recommended to refuel when the fuel level is around 20%. This is because the fuel pump in the tank relies on gasoline for cooling. Consistently running on low fuel may cause the fuel pump to overheat and fail. Therefore, avoid waiting until the tank is nearly empty before refueling; instead, refuel when the fuel level is between 15% and 20%. Here are some precautions to keep in mind when refueling: Fuel Grade: Gasoline comes in several types, each with different component ratios, leading to variations in performance. Always check the fuel grade before refueling. Beware of Static Electricity: During winter, the dry climate can easily generate static electricity. It is crucial to guard against static electricity when refueling in winter, as it can lead to serious consequences.
9
0
Share

What kind of factory is Cooper Tire?

It should be Cooper Tire. Cooper Tire is a tire factory. Here is an introduction to Cooper Tire: Introduction: Cooper Tire is a globally renowned tire company with nearly a century of history and is the fourth largest tire manufacturer in North America. Cooper Tire holds a leading position in the global tire replacement industry. Currently, Cooper Tire ranks as the eighth largest in terms of sales within the industry. Business Scope: The business scope includes the design and production of tires, as well as the sales of tires for passenger cars, light trucks, medium trucks, motorcycles, and racing vehicles. It also provides tread rubber and related equipment for the replacement industry. Cooper Tire is headquartered in Findlay, Ohio, USA, and operates 63 production, sales, distribution, technology, and design plants worldwide.
16
4
Share

Can the Buick GL8 seat 8 people?

Buick GL8 cannot seat 8 people, it is a seven-seater vehicle with a maximum capacity of 7 people. The Buick GL8 is an MPV launched by SAIC General Motors Buick, and this model holds a very prominent position in the MPV market. As a representative model of Buick, this vehicle has been highly favored by consumers due to its excellent space performance and superior comfort. As an MPV, in terms of power, this car is equipped with a 2.0T SIDI direct-injection turbocharged engine, with a maximum power of 191 kW and a maximum torque of 350 Nm. In terms of the transmission system, it is paired with a 6-speed automatic manual transmission.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.