Should the Wuling National VI Transmission Be Replaced Due to Abnormal Noise?

1 Answers
Grady
07/30/25 4:26am
Wuling National VI transmission should be replaced if there is abnormal noise. Here is some relevant information about Wuling: Introduction to Wuling: The Wuling automobile brand was established in 1985, embodying the spirit of "hard work and self-improvement," and has now become one of the most valuable brands in China's automotive industry. Company Introduction of Wuling: SAIC-GM-Wuling Automobile Co., Ltd. is a large-scale enterprise jointly established by Shanghai Automotive Industry Corporation (Group), General Motors Corporation of the United States, and Liuzhou Wuling Automobile Co., Ltd. Its predecessor was Liuzhou Wuling Automobile Co., Ltd.
Was this review help?
15
3
Share
More Forum Discussions

What is the battery model for Mazda 6?

The original battery is a Fengfan battery with a capacity of 68AH. Below is relevant information about the battery: 1. Principle: The car battery, also known as the storage battery, works by converting chemical energy into electrical energy during the driving process. Generally, the lifespan of a car battery ranges from 1 to 8 years, with the exact duration closely related to the car's usage conditions. Common domestic battery brands include Feifan, Zhengye, and Fengfan, with prices ranging from 200 to 1000 yuan. 2. Timely Charging: Under normal usage conditions, a car battery typically lasts more than three years. If you notice that the battery cannot hold a charge or experiences weak performance during online startup, it should be removed and charged for 12 to 24 hours. If the battery still shows weak performance after charging, consider replacing it.
18
5
Share

What is a Three-Way Catalytic Converter?

A three-way catalytic converter is the most important external purification device installed in a vehicle's exhaust system. Related introduction: 1. Overview: The three-way catalytic converter, installed in a vehicle's exhaust system, is the most crucial external purification device. It converts harmful gases such as carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NOx) emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Since this converter can simultaneously transform the three main harmful substances in exhaust gases into harmless substances, it is called a three-way catalytic converter. 2. Function: It transforms harmful gases like carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NOx) emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions.
6
2
Share

What are the differences between the 2007 and 2008 Crown models?

The differences between the 2007 and 2008 Crown models mainly lie in one aspect: the 2007 Crown offers two powertrain combinations, while the 2008 Crown only has one. Specific details are as follows: 1. The additional powertrain combination in the 2007 model is: equipped with a 3.0-liter V6 naturally aspirated engine, paired with a 6-speed automatic manual transmission, delivering a maximum power of 170KW, maximum horsepower of 231PS, and maximum torque of 300N·m. 2. Both the 2007 and 2008 models share a common powertrain combination: equipped with a 2.5-liter V6 naturally aspirated engine, matched with a 6-speed automatic manual transmission, producing a maximum power of 145KW, maximum horsepower of 193PS, and maximum torque of 236N·m.
17
2
Share

What is the trick to releasing the clutch without stalling?

The key points to releasing the clutch without stalling can be summarized as follows: 1. Master the technique: Release the clutch slowly when releasing the handbrake. Keep the throttle as large as possible, meaning do not release the throttle pedal when releasing the handbrake. Finally, release the handbrake quickly, i.e., when reaching the semi-engagement point, the handbrake should follow. 2. Handling a stall: If the car stalls suddenly while going uphill, do not panic. Stay calm, pull the handbrake, and press the brake to control the car from sliding back. If the car stalls during a hill start, when restarting, shift into first gear and press the clutch all the way down; then slowly lift the clutch to the semi-engagement state. The advantage of using first gear is that it provides sufficient power and is less likely to stall. Maintain an appropriate speed; excessive speed can cause significant body vibration.
7
4
Share

How to Paint Plastic for Maximum Adhesion?

To ensure paint adheres firmly to plastic, first apply a coat of plastic primer, provided the plastic surface is smooth and even. Related information: 1. Introduction: Paint is a type of synthetic coating made from nitrocellulose, resins, pigments, and solvents. It is typically sprayed evenly onto surfaces using a spray gun, offering water resistance, oil resistance, quick drying, and is used for automobiles, aircraft, woodwork, leather, etc. 2. Precautions: This substance is toxic and can have certain effects on the body. The toxicity varies among different brands of paint due to differences in composition and content. Special attention should be paid to safety during use to avoid inhalation and skin contact.
1
2
Share

What are the three transmission methods of camshafts?

There are three transmission methods for camshafts: cylindrical gear transmission, bevel gear transmission, and chain transmission. High-performance engines in mid-to-high-end cars and trucks generally use chain or cylindrical gear transmission to ensure the accuracy of valve timing. Cylindrical Gear Transmission: Most overhead camshafts and underhead camshafts use cylindrical timing gear transmission, where the crankshaft gear meshes with the camshaft gear through an intermediate gear. Timing gears are mostly helical to ensure smooth meshing and reduce noise. The gears are made of steel or cast iron. This method is simple in structure, easy to disassemble and assemble, and reliable in process. Bevel Gear Transmission: This method is commonly used in lightweight, high-speed, high-power internal combustion engines with overhead camshafts. The camshaft is far from the crankshaft, and bevel gears and vertical elastic shafts are used for transmission. It is compact and reliable in structure but inconvenient to disassemble and assemble. Chain Transmission: Chain transmission is mostly used in overhead camshaft valve mechanisms, which can protect the valve mechanism from inertial loads. This device requires high-quality chains, and the chains must maintain a certain tension during operation. It is equipped with a tensioner sprocket, and adjusting the position of the tensioner sprocket can change the chain tension. It has good operational reliability but is less durable than gear transmission devices.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.