···
Log in / Register

Should the vehicle on the right have the right of way at a T-intersection?

5 Answers
MacLogan
07/23/25 12:45pm

When there is no traffic command or traffic lights, if your vehicle arrives at the intersection and finds a vehicle approaching from the right, you should yield to the vehicle from the right. Here are the specific details: When there is no vehicle from the right: If your vehicle arrives at the intersection and does not see any vehicle approaching from the right, you should proceed straight as usual. If you suddenly notice a high-speed vehicle approaching from the right after crossing the center line and a collision occurs because you cannot avoid it in time, and if your vehicle also has violations, the responsibility should be shared based on the proportion of fault; both parties may bear equal responsibility or primary and secondary responsibility. When there is a vehicle from the right: If your vehicle arrives at the intersection and does not yield to the vehicle from the right, resulting in a collision, and the other vehicle has violations, the responsibility should be shared based on the proportion of fault; it may be equal responsibility or primary and secondary responsibility.

Was this review help?
4
1
Share
MacRiley
08/10/25 10:40am

After driving at T-junctions for so many years, I've encountered many beginners confused about who should yield. According to traffic rules, in the absence of traffic lights, vehicles coming from the right indeed have the right of way. This is called the 'Yield to the Right' principle, primarily to avoid collisions because at intersections, vehicles on the right often have blind spots. If you don't slow down to let them pass, the risk of accidents is higher. In actual driving, I most often remind myself to ease off the accelerator early, check the right rear, and proceed only after confirming it's safe. Remember, if there's a car approaching from the right, stop and let them pass—don't rush. This isn't just about following the law; it also helps cultivate good habits. Plus, with T-junctions being particularly common in cities, especially in the narrow alleys of old urban areas, developing the habit of yielding can reduce accidents and save you the hassle of car repairs later. In short, drive steadily and get home safely.

Was this review help?
2
2
Share
Expand All
TravisAnn
09/22/25 4:18am

When I first started learning to drive, I was quite confused about who has the right of way at a T-junction. Later, I understood that under normal circumstances, you should yield to vehicles approaching from the right. My instructor emphasized this countless times—when there's no traffic light, slow down and give way. Initially, I was always afraid of misjudging, but with more driving experience, I learned to observe the right-side blind spot carefully and only accelerate after confirming no cars are coming. The key is to stay patient, especially at T-junctions near schools or residential areas where children might run around unexpectedly. The yielding principle helps protect pedestrian safety. Now, I've developed the habit of checking the right-side mirror in advance and making a brief stop when signals are unclear. Experience proves this rule is practical—new drivers just need a few more practices to get the hang of it, and it helps avoid traffic tickets too. Driving is a long-term commitment, and prioritizing safety is always the right approach.

Was this review help?
9
3
Share
Expand All
JudahDella
11/05/25 7:38am

The priority rule at a T-junction is simple: yield to the vehicle on the right. This is standard traffic law, designed to reduce collisions because the right side has potential blind spots. I've analyzed data showing many accidents stem from rushing, so in actual driving, you should slow down early and observe right-side movements comprehensively. Safety is paramount—for example, in low visibility conditions like rain or night, pause a few extra seconds to confirm. Although the rule is basic, apply it flexibly according to the environment, not mechanically. Key point: yield right without traffic signals; follow signals if present. Simple adherence significantly improves road safety.

Was this review help?
5
3
Share
Expand All
SanSebastian
12/26/25 9:26am

As a daily commuter transporting my family, I pay extra attention to yielding at T-junctions. The rule is clear: yield to vehicles approaching from the right. This ensures safer family trips—for instance, when driving with children, I brake early and double-check the right side for approaching vehicles. I've encountered several close calls in reality, but thankfully, adhering to this principle helped avoid accidents. My advice: exercise extra caution at T-junctions—slow down, confirm safety, then proceed. Don't risk major consequences for minor haste. Rules aren't rigid; they protect everyone. Once integrated into driving habits, they become seamless. Remember: safety outweighs speed tenfold.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

How many meters long is the Panamera?

The Panamera has a length of 5199mm, a width of 1937mm, and a wheelbase of 3100mm. Among vehicles in the same class, the Panamera's wheelbase ranks 10th. The Panamera's trunk offers a standard capacity of 467L, expandable to 1455L, ranking 3rd in trunk volume among vehicles in the same price and class range. The Panamera is equipped with a comprehensive set of active and passive safety features, including front parking sensors, HUD (Head-Up Display), lane keeping assist, wireless phone charging, anti-lock braking system (ABS), traction control (ASR/TCS, etc.), night vision system, auto-dimming exterior mirrors, brake assist (EBA/BAS, etc.), hill start assist, knee airbags, child seat anchors, heated steering wheel, auto hold, engine start-stop, electronic stability program (ESP/DSC, etc.), tire pressure monitoring, electronic brakeforce distribution (EBD), collision warning/active braking, rear parking sensors, side curtain airbags, LED daytime running lights, and more. The 2022 Panamera is powered by a 2.9T engine paired with a dual-clutch transmission, delivering a maximum power output of 324.0kW (441PS) and a peak torque of 550.0N·m.
5
2
Share

Where is the windshield washer button on the Mercedes-Benz C260?

The silver button on the lever to the left of the steering wheel: a light press activates the wipers, while a firm deep press triggers the washer fluid spray along with the wipers. Introduction to windshield washer fluid: Windshield washer fluid, also known as wiper fluid, is a cleaning solution specifically designed for automobile windshields. It is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Functions of windshield washer fluid: Cleaning: Formulated with multiple surfactants and additives, it provides wetting, penetration, solubilization, and dirt decomposition capabilities for effective cleaning and stain removal. Anti-freeze: The alcohol and ethylene glycol in the fluid lower the freezing point, preventing freezing and dissolving frost. Anti-fog: It forms a monomolecular protective film on the glass surface to prevent fog droplet formation, ensuring clear driving visibility. Anti-static: After cleaning, substances adhering to the glass surface neutralize static charges, offering anti-static properties. Lubrication: The ethylene glycol content increases viscosity, reducing friction between wipers and glass to prevent scratches and provide lubrication.
8
3
Share

What are the reasons for insufficient power and weak acceleration in diesel vehicles?

Diesel vehicles may experience insufficient power and weak acceleration due to the following specific reasons: 1. Carbon deposits: Carbon deposits can accumulate in the cylinders, throttle valve, spark plugs, and intake system. These areas are directly related to the engine's power output. Excessive carbon deposits inside the engine reduce ignition energy and intake efficiency, ultimately leading to decreased engine power and resulting in insufficient power and weak acceleration. 2. Fuel system: Using an incompatible fuel grade can reduce the vehicle's output power and performance. Alternatively, blockages in the fuel tank vent, fuel tank switch, fuel filter, or fuel lines between the tank and carburetor can restrict fuel supply, causing a lean air-fuel mixture and weak engine acceleration. 3. Air intake: If the air filter is not cleaned regularly and becomes clogged, insufficient air intake will result in an overly rich air-fuel mixture, reducing engine power. For vehicles equipped with a turbocharger, a malfunction in the turbocharging system can cause the engine to remain sluggish and lack power even when the throttle is applied. 4. Engine overheating: Insufficient engine oil or coolant, or a malfunctioning cooling system, can increase engine load and lead to poor heat dissipation. Overheating reduces lubrication effectiveness, increases mechanical wear, and decreases engine power, resulting in weak acceleration.
14
4
Share

What does the 510 gear e/s mean?

E stands for the economy mode, with lower engine speed and earlier gear shifting; S stands for the sport mode, with higher engine speed and later gear shifting. E is the abbreviation of ECO (Economy); S is the abbreviation of Sport (Sport). After pressing, the display will show AE or AS. AE is the economy mode; AS is the sport mode. Here are the relevant details: 1. The name ECO is derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO is commonly referred to as the economy mode (energy-saving mode). 2. The working principle of the ECO mode mainly involves adjusting various parameters such as transmission gear position, engine speed, braking system, and transmission oil temperature through various sensors. The vehicle's computer (ECU) then calculates the optimal fuel injection amount to achieve fuel-saving purposes. Essentially, it controls the car to avoid prolonged idling or low-speed driving and prevents sudden acceleration, thereby achieving the goal of fuel efficiency. 3. The S gear, short for sport in English, is the sport gear. Many car models refer to it as the sport mode. Engaging the S gear will cause the car to shift gears more slowly or downshift earlier, keeping the engine at a higher speed and increasing torque output to provide greater power and enhance the vehicle's acceleration performance. In this mode, fuel consumption will increase. The S gear is often used for overtaking, climbing hills, and similar situations.
8
1
Share

How many liters of transmission oil should be added to a Volvo XC60?

Volvo XC60 requires 6 liters of transmission oil. Transmission oil replacement interval: It is recommended to replace the transmission oil after every 17,000 kilometers. Although manual transmission oil may not show noticeable issues beyond 17,000 kilometers, this is considered a critical threshold. Functions of transmission oil: The transmission generates significant heat during operation, and the transmission oil helps dissipate this heat. During daily driving, gear changes are necessary based on driving conditions, and the transmission oil provides lubrication to ensure smoother shifting. It also helps maintain the cleanliness of the transmission system and prolongs the lifespan of transmission components.
3
1
Share

What does CLK on a car mean?

If you see the letters CLK on a car, it likely refers to a model from the German automotive brand Mercedes-Benz, specifically the Mercedes CLK. The CLK is a two-door coupe series launched by Mercedes-Benz in 1997. The 'C' stands for Coupe, symbolizing sophistication and high performance; 'L' for Light, representing agile handling and elegant contours; and 'K' for Compact, indicating a concise overall design style. Below is some relevant information: 1. The CLK joined the coupe series with its unique style, captivating all Mercedes-Benz enthusiasts. The three letters CLK perfectly explain the multiple superior characteristics of this coupe. 2. The CLK-COUPE truly showcases a car that stands out in both design philosophy and technology, captivating hearts. The CLK not only inherits the classic elegant lines of the E-Class and SLK but also combines a dynamic and streamlined appearance, adding a special charm. This represents an unprecedented and exceptionally smooth synthesis of design by Mercedes-Benz. Although the CLK borrows design principles from other series, the designers reinterpreted them in new ways, reflecting the coupe's independent personality. 3. Pursuing dynamism without losing prestige, the new CLK coupe also comes with more comprehensive standard features than other series. These include side airbags, automatic seatbelt tensioners, rear power windows, headlight assist systems, rain sensors, and height-adjustable steering wheels. Additionally, the full-function climate control system constantly monitors the interior airflow, automatically adjusting the temperature and humidity inside the car to fully display its luxurious nature.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.