···
Log in / Register

Should the turn signal be used throughout the entire ramp?

4 Answers
Jared
07/29/25 10:28pm
Before entering the ramp, use the right turn signal. After entering the ramp, switch to the left turn signal to indicate highway driving. At this time, pay attention to the left rearview mirror, watch for vehicles approaching from behind, and take care to yield to avoid traffic accidents. Once on the highway, quickly accelerate the vehicle speed to 120 km/h. Here are some precautions for highway driving: 1. Control driving speed: As is well known, highways have good road surfaces, and many people tend to speed on them, which is not conducive to driving safety. The higher the speed, the greater the centrifugal braking distance, and the worse the vehicle's handling stability. Additionally, excessive speed shortens the driver's sight distance and increases the likelihood of misjudgment. Therefore, controlling driving speed is the primary condition for ensuring highway driving safety. 2. Avoid driving too slowly: In China, the minimum speed limit on highways is 60 km/h under normal driving conditions. Driving too slowly can, on one hand, affect vehicles in the same lane and prevent the highway from realizing its intended fast and efficient advantages. On the other hand, it can easily cause traffic congestion or disrupt the driving order with subsequent vehicles continuously overtaking. 3. Avoid following too closely: A safe following distance should vary according to driving speed, weather, and road conditions. The faster the speed, the greater the following distance should be, especially during snow, rain, fog, or icy road conditions, where the distance should be doubled.
Was this review help?
5
4
Share
GiaLee
08/15/25 11:16pm
Keeping the turn signal on throughout the entire ramp is a crucial safety habit when driving at high speeds. Imagine you're transitioning from the main lane to the ramp—if you don't keep the signal on, vehicles behind might mistakenly assume you've stopped turning, leading to rear-end collisions or crashes. This is especially important in areas with many blind spots or heavy traffic, where maintaining the signal clearly communicates your intentions and reduces accident risks. With 20 years of driving experience, I always keep the turn signal on from entering the curve until fully exiting. It helps you stay focused on the road and prevents misleading others. Some beginners only signal at the start, but in complex ramps—like during rain, fog, or at night—keeping it on throughout is the most reliable approach. Cultivating this habit isn't just about following rules; it's about protecting yourself and others, as driving safety is no trivial matter. Remember, turn signals aren't decorations—they're your language for communicating with surrounding drivers.
Was this review help?
17
1
Share
Expand All
OJune
10/18/25 3:05am
From a traffic regulation perspective, keeping turn signals on throughout the entire ramp is mandatory in many regions. Most traffic laws require turn signals when changing lanes or turning, and entering a ramp is essentially a turning maneuver. Maintaining continuous signaling ensures clear communication and prevents misunderstandings. For example, if you only activate the signal at the entrance then turn it off, following vehicles might assume you've canceled the turn, creating hazards. Having studied various regional driving manuals, many recommend maintaining signals throughout, especially at highway merge points. In daily driving, I habitually keep signals on for the full duration—it's simple, effective, and avoids fines. Additionally, regularly checking your vehicle's turn signals for proper function is crucial, as even perfect rules become meaningless with faulty equipment. Ultimately, compliance forms the foundation of safety.
Was this review help?
6
0
Share
Expand All
VonMackenzie
12/01/25 3:44am
From a novice driver's perspective, keeping the turn signal on throughout the entire ramp was a strict rule my instructor taught me. When I first started learning to drive, I often forgot to turn the signal on or off in time, so my instructor made me keep it on from entering the ramp until exiting, as it was simpler for building the habit. In actual driving, keeping the signal on the whole time enhances safety and makes your intentions clear to other drivers. Once, I entered a ramp without signaling, and the car behind me honked aggressively—it almost caused an accident. Since then, I always do this; it not only prevents accidents but also boosts driving confidence. My advice for beginners: simplify the rule—whenever you're on a ramp, turn on the signal. Think less about technique and focus more on practice.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How many cylinders does the Envision 20t have?

The Envision 20t is a four-cylinder model. Its lineup includes: the 2020 20t two-wheel-drive luxury model, the 2020 20t two-wheel-drive elite model, the 2020 20t two-wheel-drive leading model, the 2019 20t two-wheel-drive elite model (China V), and the 2019 20t two-wheel-drive elite model (China VI). Taking the 2020 20t two-wheel-drive luxury model Envision as an example, its body dimensions are: length 4686mm, width 1839mm, height 1686mm, with a wheelbase of 2750mm, a fuel tank capacity of 66 liters, and a curb weight of 1610kg. The 2020 20t two-wheel-drive luxury model Envision features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
13
5
Share

What are the reasons why the car does not respond when pressing the remote car key?

The reasons why the car does not respond when pressing the remote car key are: 1. The car battery is dead, and the vehicle cannot receive the signal; 2. There is a high-power radio interference signal on the same frequency; 3. The antenna of the remote transmitter in the car is aging; 4. Some grease in the remote has become sticky, causing poor contact. Types of car keys: mechanical key, remote key, touchscreen LCD key, smart wristband key. The functions of car keys are: 1. Quickly locate the vehicle using the remote alarm device; 2. Close the windows after turning off the engine; 3. Automatically open the trunk; 4. Selectively open the driver's door.
18
0
Share

What are the main components of an airbag?

The main components of an airbag are: collision sensor, control module, gas generator, and the airbag itself. The function of an airbag is to reduce the severity of injuries to occupants. Its protection principle is: 1. When a vehicle experiences a certain level of collision force, the airbag system triggers a chemical reaction similar to a small explosive detonation; 2. The airbag, hidden within the vehicle, inflates and deploys instantly, positioning itself in time before the occupant's body collides with interior components; 3. When the body comes into contact with the airbag, the airbag begins to deflate through the pores on its surface, thereby cushioning the impact and reducing the force exerted on the body.
18
1
Share

Is the Atenza a B-segment car?

The Atenza is a B-segment car, which is a sports sedan under the Mazda brand. Taking the 2020 Atenza as an example, it belongs to the mid-size car category with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, a wheelbase of 2830mm, a fuel tank capacity of 56.2 liters, and a curb weight of 1518kg. The 2020 Atenza features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158 PS, a maximum power of 116 kW, and a maximum torque of 202 Nm, paired with a 6-speed automatic transmission.
15
1
Share

What is the method to start the ignition for the Atenza?

The method to start the ignition for the Atenza is to press the brake pedal and then press the one-touch start button to ignite. The Atenza lineup includes models such as the 2020 Skyactiv-G Fashion Edition, 2020 Skyactiv-G Luxury Edition, 2020 Skyactiv-G Premium Edition, 2020 Skyactiv-G Sport Edition, and 2020 Skyactiv-G Supreme Edition. Taking the 2020 Skyactiv-G Fashion Edition Atenza as an example, its body dimensions are: 4870mm in length, 1840mm in width, and 1445mm in height, with a fuel tank capacity of 56.2 liters, a minimum ground clearance of 162mm, a trunk capacity of 483 liters, and a curb weight of 1518kg.
13
0
Share

Where is the manual lock for the Fit?

Fit's manual lock is located at the OBD interface. Here is more information about the Fit: 1. The Fit is a compact car under Honda, equipped with a 1.5-liter naturally aspirated Earth Dreams engine. The 1.5-liter naturally aspirated engine of the Fit has a maximum power of 96 kW, a maximum torque of 155 Nm, a maximum power speed of 6600 rpm, and a maximum torque speed of 4600 rpm. This engine features i-VTEC technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a CVT. 2. The front suspension of the Fit uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.