···
Log in / Register

Should the Tacqua use 92 or 95 octane gasoline?

3 Answers
VonOmar
09/07/25 7:04am
92 octane or higher gasoline is acceptable. Additional specifications are as follows: In terms of body dimensions, the length, width, and height are 4194x1760x1601 (mm) respectively, with a wheelbase of 2651mm. Regarding features: it is equipped with a full LCD digital dashboard and two specifications of central control screens (8.0-inch/9.2-inch), built-in CRS3.0 intelligent infotainment system and CNS3.0 intelligent in-car navigation infotainment system, and also supports smartphone mirroring. Additionally, it includes functions such as smart car control, intelligent navigation, voice recognition, and entertainment features.
Was this review help?
5
2
Share
WyattFitz
09/19/25 6:12am
My car is a Tacqua, and I've been driving it for several years. I always use 95-octane gasoline, which feels excellent. The engine runs smoothly, accelerates responsively, and the fuel consumption is quite economical. The manufacturer's manual recommends 95-octane fuel because the 1.5T engine has a high compression ratio. Using 92-octane fuel with insufficient octane rating can easily cause knocking under high temperatures or heavy loads, leading to engine vibrations and reduced lifespan. I've occasionally used 92-octane fuel, such as during long trips when 95-octane stations are unavailable, but prolonged use results in louder engine noise and reduced power. I recommend sticking to 95-octane fuel daily to protect the car's performance and avoid unexpected repair costs. Regularly checking fuel quality during maintenance is also crucial—saving money shouldn't come at the expense of fuel quality, as safety should always come first.
Was this review help?
18
5
Share
Expand All
DelDerek
11/02/25 6:34am
When it comes to refueling the Tacqua, I find that 95-octane gasoline is more cost-effective. Although 95-octane is slightly more expensive than 92-octane, it actually burns more efficiently, allowing a full tank to go further. On the contrary, using 92-octane can lead to lower engine efficiency, potentially increasing fuel consumption or causing acceleration lag, which may result in higher maintenance costs in the long run. I always monitor fuel price fluctuations and prioritize gas stations that offer 95-octane. The manual recommends using 95-octane to prevent engine knocking. In case only 92-octane is available during mountain trips, it's not a big issue, but don't make it a habit. Remember, fuel quality directly affects the powertrain. Choosing the right fuel is protecting your investment—don't risk damaging your precious car over a few cents difference.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

Under What Circumstances Should Brake Pads Be Replaced?

When there is abnormal noise or vibration during braking, the brake pads need to be replaced. Relevant information about braking is as follows: 1. Abnormal noise during braking occurs because the thickness of the brake pads is less than 3MM, and the upper limit iron piece of the brake pads wears against the brake disc, causing the noise. 2. Brake vibration is caused by uneven contact between the brake pads and the brake disc. 3. For disc brakes, the brake pads generally need to be replaced after the vehicle has traveled about 60,000 kilometers, while for drum brakes, the brake pads generally need to be replaced after the vehicle has traveled about 100,000 kilometers. 4. Check the thickness of the brake pads; if the thickness is less than 3MM, they should be replaced.
4
4
Share

What is the best engine oil for the new Santana?

For the new Santana, it is recommended to use the original specification 5W40 engine oil. The Santana engine operates at a high power level, and its high compression ratio results in elevated internal temperatures. High-viscosity oil can better protect the engine and cool components to reduce operating temperatures. Here are some details about engine oil: 1. Engine oil is the lubricant used in engines, composed of base oil and additives. 2. As a type of machinery, engines have specific requirements for lubricants, such as appropriate viscosity, oxidation resistance, wear resistance, corrosion prevention, and temperature-viscosity performance. 3. With a density of approximately 0.91×10³ (kg/m³), engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption.
15
3
Share

What are the color options for the BMW 5 Series?

The BMW 5 Series offers the following color options: Sapphire Black, Brazilian Brown, Burgundy Red, Platinum Silver, Jucaro Beige, Cashmere Silver, Moonlight Silver, Mineral White, and Alpine White. The BMW 5 Series is manufactured by BMW Brilliance, classified as a mid-to-large-sized sedan, and equipped with a 2.0T L4 engine. The vehicle's dimensions are 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. It features a 4-door, 5-seat sedan body type. The BMW 5 Series adopts a front-engine, rear-wheel-drive layout, electric power steering, a unibody structure, and an electronic parking brake system.
19
1
Share

Do You Need to Press the Clutch When Turning a Vehicle?

You do not need to press the clutch when turning a vehicle. Relevant information about the clutch is as follows: 1. The clutch is used to connect or disconnect the motion between shafts and their sleeve transmission components (such as gears, pulleys, etc.) or between two coaxial shafts, enabling the start, stop, speed change, and direction change of the machine tool's movement. 2. Types of clutches can be divided into engagement clutches, friction clutches, overrunning clutches, and safety clutches. 3. Engagement clutches transmit motion and torque through the meshing of the teeth of two components. 4. Friction clutches transmit motion and torque through the friction generated between the contact surfaces of two pressed components. 5. Overrunning clutches are mainly used on shafts with alternating fast and slow power sources to achieve automatic motion conversion.
10
4
Share

Which company owns the Lexus brand?

Lexus is a luxury brand under Japan's Toyota. Here are some key details about Lexus: 1. Lexus has five major factories worldwide, with three located in Japan: the Kyushu Plant in Fukuoka, the Tahara Plant in Aichi Prefecture, and the Motomachi Plant in Aichi Prefecture. The other two are in Canada (Ontario Plant) and the United States (Kentucky Plant). Approximately 90% of Lexus vehicles sold in China are produced at the Kyushu Plant in Fukuoka, Japan. 2. The English name 'Lexus' is similar to the word 'Luxury.' Its logo features the letter 'L' (the first letter of Lexus) enclosed in an oval symbolizing the Earth, representing Lexus's global presence. Lexus's first model was the Lexus LS400 for the North American market. Currently, its lineup includes luxury hatchbacks (CT series), luxury sedans (IS, ES, GS, LS series), luxury SUVs (NX, RX, LX series), and luxury sports cars (RC, LC series).
10
1
Share

How to Replace Coolant in a Polo?

polo's coolant reservoir is located on the left side of the engine. The recommended coolant replacement interval is 60,000 kilometers, with a replacement capacity of 4L. Below are detailed instructions for coolant replacement: 1. Before replacing the coolant, let the vehicle sit for 30 minutes to prevent burns from hot coolant: Locate and loosen the coolant drain valve at the bottom of the radiator until all the coolant has completely drained out. 2. Keep the car idling to completely drain the old coolant: Continuously add clean water to the coolant reservoir, allowing it to flush out any remaining coolant in the cooling system. Stop adding water when the flow becomes colorless, indicating the old coolant has been fully removed. 3. Tighten the drain valve and turn off the engine: Add new coolant through the filler port until it reaches between the minimum and maximum level marks. If accidentally overfilled, restart the engine and let it idle. Air in the cooling system will be expelled, causing the coolant level to drop. Once the coolant level stabilizes, add more coolant to bring it between the two marks again.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.