Should the Roewe i5 use 92 or 95 octane gasoline?

2 Answers
SanRonan
07/24/25 6:42am
Roewe i5 can use either 92 or 95 octane gasoline, and the manufacturer recommends a fuel grade of 92 or above. The differences between gasoline grades and considerations for choosing the appropriate grade are as follows: Differences between gasoline grades: The difference between 92 and 95 octane gasoline is not in quality but in the content of added isooctane. 95 octane gasoline contains 95% isooctane and 5% n-heptane, while 92 octane gasoline contains 92% isooctane and 8% n-heptane. The higher the isooctane content, the stronger the gasoline's anti-knock performance and the more expensive it is. Therefore, 95 octane gasoline has better anti-knock performance than 92 octane gasoline. Considerations for choosing the appropriate gasoline grade: Under normal circumstances, it is not recommended to switch to a gasoline grade lower than the standard specified in the vehicle manual. Using a lower-grade gasoline may cause premature combustion, leading to engine knocking. Additionally, incomplete combustion of gasoline can increase carbon deposits, potentially clogging the fuel injectors and fuel lines, resulting in fuel supply interruptions and engine stalling. Mixing different grades of gasoline is also not advisable, as long-term use can cause engine damage, such as increased carbon deposits and higher fuel consumption.
Was this review help?
20
4
Share
OLane
08/11/25 2:27am
I've been driving the Roewe i5 for over three years, using 92-octane gasoline, and it feels very economical. The engine design of this car is compatible with 92-octane, and the manufacturer's manual clearly recommends it. Using 92-octane is sufficient for daily use, saving a lot on fuel costs, especially in years with high gas prices. Although 95-octane is more expensive and has a higher octane rating, theoretically providing smoother acceleration, in practice, the difference is minimal unless you frequently drive long distances or seek explosive power on highways. I've tried both types of fuel myself, and there wasn't much change in fuel consumption. The key is to regularly change the engine oil and maintain the car. Using the wrong octane might lead to carbon buildup or reduced efficiency, so it's safest to follow the manual. Also, pay attention to the quality of the gas station—don't compromise on cheap, low-quality fuel, as that's better for the engine.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What does the Subject 2 simulator mean?

Subject 2 simulator is designed to simulate the formal Subject 2 driving test, aiming to improve the pass rate. The simulation covers the same test items as the actual exam, serving as a practice test. The content of the Subject 2 test is introduced as follows: 1. Small vehicles: For C1 and C2 license tests, the required items include reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns) — five mandatory items (some regions include a sixth item: highway toll card collection). 2. Large vehicles: For A1, A2, A3, B1, and B2 license tests, the items include stake test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a narrow gate, driving over continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulations of highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
9
5
Share

What is the Function of Shock Absorbers?

The function of shock absorbers is to suppress the oscillations caused by the rebound of springs after absorbing shocks and the impacts from the road surface. When driving on uneven roads, although the shock-absorbing springs can filter out the vibrations from the road, the springs themselves still undergo reciprocating motion. Shock absorbers are used to suppress this spring bouncing. If the shock absorbers are too soft, the vehicle body will bounce up and down; if they are too hard, they will create excessive resistance, hindering the normal operation of the springs. During the modification of the suspension system, stiff shock absorbers should be paired with stiff springs. The stiffness of the springs is closely related to the vehicle weight, so heavier vehicles generally use stiffer shock absorbers.
16
1
Share

How to Use the Cruise Control in the Reiz?

How to use the cruise control in the Reiz: 1. The cruise control switch is located on the cruise control lever at the lower right of the steering wheel; 2. Push it to the left to turn on the cruise control, and the green cruise indicator light on the dashboard will illuminate; 3. When the vehicle speed reaches the desired speed between 40 and 140 km/h, operate the cruise control lever downward (set), and the current speed will be set. The Reiz is the domestic name for the Japanese Toyota MARKX model, a mid-size car under FAW Toyota. In terms of body dimensions, it measures 4750mm in length, 1795mm in width, 1450mm in height, with a wheelbase of 2850mm.
10
5
Share

What Causes the Car to Stall When the Clutch is Depressed?

The reason why the car stalls when the clutch is depressed: It may be that after the clutch is fully depressed, the clutch does not disengage, making it easier to stall. The clutch cable or clutch disc should be replaced immediately. The clutch is the medium that transmits engine power to the gearbox. Its assembly includes the clutch plate, clutch pressure plate, release sleeve, release bearing, return spring, clutch cable, clutch release fork, etc. The clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the gearbox. During driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the gearbox, thereby cutting off or transmitting the power input from the engine to the gearbox.
2
0
Share

What are the reasons for high water temperature in a car?

The reasons for high water temperature in a car are: 1. Coolant leakage or insufficient coolant can cause the engine water temperature to rise; 2. When the vehicle is running at high speed, the heat generated cannot be transferred to the antifreeze in time, affecting heat dissipation; 3. The impeller cracking or loosening from the pump shaft slows down the coolant circulation speed; 4. Thermostat failure; 5. Long-term use of water as a medium leads to rust formation in the engine and radiator, resulting in poor radiator heat dissipation. When the car's water temperature is too high, avoid shutting off the engine immediately. Keep the engine idling for a while, turn on the air conditioning heater to assist in heat dissipation, and open the engine hood to help dissipate heat. Only shut off the engine after the coolant temperature drops to the normal range.
16
1
Share

How to Turn Off the Rear Wiper of FAW-Volkswagen Tayron?

The method to turn off the rear wiper of FAW-Volkswagen Tayron: Lift the wiper lever upward to turn it off, and press it downward to turn it on. The Tayron is a premium German mid-size SUV with dimensions of 4595 mm in length, 1860 mm in width, and 1660 mm in height, and a wheelbase of 2731 mm. In terms of interior design, the Tayron features a wraparound cockpit design that complements its rugged exterior, enhanced by multiple geometric cutting and folding line designs, further emphasizing a sense of strength. The Floating design of the center console is simple and elegant, with a clear functional layout and detailed designs that add a premium feel. For the suspension system, the Tayron is equipped with a MacPherson strut front suspension and a multi-link rear suspension.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.