Should the Reiz use 92 or 95 octane gasoline?

3 Answers
VonColeman
07/29/25 4:55pm
Both 92 and 95 octane gasoline can be used for the Reiz, according to the manufacturer's specifications. The vehicle is allowed to use 92 octane gasoline, but it is recommended to use gasoline with an octane rating higher than 92 for better performance. The fuel tank cap indicates that 92 octane gasoline is permissible, while 95 octane gasoline is recommended. This means that while 92 octane gasoline is acceptable, using 95 octane gasoline can provide the engine with better power output. The Reiz has a body size of 4750 mm in length, 1795 mm in width, and 1450 mm in height, with a wheelbase of 2850 mm. The Reiz features a front-engine, rear-wheel-drive layout, with a double-wishbone front suspension and a multi-link independent rear suspension. The body structure is of a unibody design.
Was this review help?
11
2
Share
BradyDella
08/14/25 6:51am
I've been driving my Reiz for ten years and have always preferred using 92-octane fuel—it's economical and practical. The manufacturer's manual clearly states that the Reiz's engine is designed for 92-octane. Using 95-octane is significantly more expensive without offering noticeable improvements. The 92-octane's rating matches the compression ratio perfectly, avoiding any risk of knocking. For daily commutes, 92-octane is more than sufficient, providing smooth acceleration without hesitation. In fact, using 95-octane might just be a waste of money, as carbon buildup issues still require regular maintenance regardless. I recommend not over-pursuing higher octane ratings unless you're taking long highway trips where a bit of extra buffer might help. The money saved can be better spent on fresh engine oil or new tires—keeping your car in good condition is far more crucial. Just remember to choose reputable gas stations to ensure fuel quality is up to standard.
Was this review help?
3
0
Share
Expand All
FranciscoAnn
10/13/25 3:54am
As a car enthusiast, I've tried using both 92 and 95 octane fuel in my Reiz, and the difference is minimal. 92 octane is economical and readily available, perfectly adequate for city commuting. Using 95 octane might slightly improve engine responsiveness, making high-speed driving more enjoyable, but whether the extra cost is worth it depends on personal preference. Higher octane offers better anti-knock properties, but it's not essential since the Reiz's compression ratio doesn't demand it. Don't fall for exaggerated marketing claims—the engine is designed to run smoothly on 92 octane without any risks. Save the money and spend it on aftermarket parts to enhance driving pleasure. Fuel quality is more important; avoid cheap, low-quality fuel that could damage the engine. Regularly clean the fuel system to maintain performance.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

What is the ground clearance of the Audi Q2L?

The ground clearance of the Audi Q2L is 142 millimeters. Here is more information about the chassis of this vehicle: 1. The suspension setup consists of a front MacPherson strut independent suspension and a rear multi-link independent suspension, which is consistent with the Audi A3 that also uses the MQB platform. 2. The chassis is composed of four parts: the transmission system, the running gear, the steering system, and the braking system. It supports and mounts the car's engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. 3. Since the chassis is constantly exposed to very harsh working conditions, it suffers significant damage and corrosion. When driving in the rain, the chassis comes into direct contact with water; in snowy conditions, it directly interacts with cold snow; and on rough mountain roads, the chassis is subjected to the torment of gravel and other harsh environments. These special road conditions can cause considerable damage to the chassis. Therefore, regularly checking the chassis for rust is one of the essential measures to effectively protect it.
8
5
Share

What is the appropriate tire pressure for entering Tibet?

There is no need for any special gas; regular air will suffice. The normal tire pressure for cars generally ranges between 2.2 and 2.5 bar. However, car tire pressure is not fixed and should be adjusted appropriately based on factors such as season, load capacity, and driving routes. Standard tire pressure can usually be found in the following places: the vehicle's user manual, the label near the driver's door (close to the B-pillar), or the drawer next to the driver's seat. Additional relevant information is as follows: 1. Overinflated tires: This reduces the contact area between the tire and the ground, leading to a significant increase in pressure and wear per unit area. It can easily result in loss of braking control, blowouts when encountering bumps or potholes, damage to the vehicle's suspension system, and discomfort during rides. 2. Underinflated tires: This increases the contact area between the tire and the ground, causing abnormal temperature rises inside the tire while driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of the steel cord layers, increasing the risk of blowouts, higher fuel consumption, and reduced tire lifespan.
10
5
Share

Why does my left leg shake when pressing the clutch during driving practice?

Shaking in the left leg when pressing the clutch during driving practice may be caused by high tension. Relaxing and avoiding nervousness can help. Prolonged practice with the leg maintaining the same position can also lead to shaking and a twitching sensation. Taking a short break or moving the legs slightly can alleviate this. Below is an introduction to the four driving test subjects: 1. Subject 1: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license assessment. 2. Subject 2: Also known as the small road test, it includes five test items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. 3. Subject 3: Also known as the big road test, it assesses road driving skills in the motor vehicle driver's test. 4. Subject 4: Also known as the theoretical test or driver's theory test.
17
1
Share

How to Turn Off the Maintenance Light on Honda Inspire?

Honda Inspire maintenance light reset steps are as follows: Step 1: Turn on the ignition and start the engine. Step 2: Press and hold the TRIP maintenance reset button located below the left air vent on the dashboard (do not release after pressing). Step 3: When the mileage and OILLIFE start flashing, release the maintenance reset button. Step 4: Turn off the engine, then restart it to check if the maintenance reminder has been successfully reset. Step 5: If the maintenance reminder fails to reset, repeat the above steps several times until successful. Additional information: The Honda Inspire is positioned as Dongfeng Honda's flagship sedan. It was officially launched in October 2018, equipped with either a 1.5T turbocharged engine (260TURBO) or a 2.0L i-MMD hybrid powertrain, offering a total of 7 variants. The Dongfeng Honda INSPIRE measures 4910mm/1862mm/1450mm in length/width/height with a 2830mm wheelbase.
7
4
Share

What happens if you release the clutch and then step on the brake?

If you step on the brake while in gear, the engine will stall. If in neutral, stepping on the brake has no effect. Below are the relevant explanations: 1. At low speeds: For a manual transmission car, if the car is stationary and you press the brake fully without disengaging the clutch, the engine cannot drive the car, causing the crankshaft to stop moving and the engine to stall. While moving, as long as the car's speed is higher than the speed corresponding to the engine idle speed at the current transmission gear ratio, the car will not stall. 2. At high speeds: When decelerating, if the speed is above 40, it is advisable to brake while in gear (this effectively utilizes the engine's resistance to decelerate, reduces brake pad wear, and avoids clutch wear). After the speed drops below 40, you can then press the clutch to shift to neutral or engage a suitable lower gear.
8
1
Share

Does the EA211-DJS Engine Burn Oil?

ea211-djs engine burns oil. The following are the reasons related to the EA211 engine burning oil: 1. Low-quality oil or incorrect viscosity grade: Low-quality oil can lead to increased wear. Additionally, oil viscosity that is too low or too high can cause poor engine lubrication, increasing wear on piston rings and cylinder walls, reducing sealing performance, and leading to oil burning; 2. Overfilling of oil: When the oil level exceeds the midpoint, due to high oil pressure, parts lubricated by splash lubrication during engine operation can enter the combustion chamber and burn excessively; 3. Turbocharger oil leakage: The turbo shaft of the turbocharger is lubricated by floating bearings. This type of vehicle has an oil passage leading to the turbocharger. Leakage in the pipeline or bearings may cause oil to seep from the turbocharger into the exhaust pipe. When the exhaust pipe temperature is high, the oil is baked and emitted as blue smoke.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.