Should the positive or negative terminal be connected first when installing a car battery?

How to Clean Car Leather Seats?

Use a vacuum cleaner to clean the seats, first removing dust and large particles of dirt to avoid scratching the leather during subsequent cleaning. If the seats are particularly dirty, gently wipe the leather with a soft brush and then use a towel to remove the dirt. Spray the cleaning agent directly onto the seats and gently wipe with a soft brush. After cleaning, allow the seats to air dry until completely dry. Simple maintenance methods for leather seats: 1. Keep car leather seats at least two feet away from heat sources, as being too close can cause the leather to crack; 2. Avoid prolonged exposure to direct sunlight to prevent fading and premature damage; 3. Regularly clean and maintain, using a vacuum cleaner once a week to remove dust; 4. Do not use a hairdryer to quickly dry the leather after cleaning—allow it to air dry naturally to protect the leather seats from damage and conserve resources.

16

5

Share

What brand is the Santana engine?

The Santana engine is a Volkswagen EA211 series 1.5L naturally aspirated engine. Below are relevant details about the Santana engine: 1. Maximum power speed is 6100 rpm. 2. Maximum power is 82 kW. 3. Maximum torque is 145 Nm. 4. Maximum torque speed is 400 rpm. Below are relevant details about the Santana model: 1. The Santana is a compact 4-door 5-seater sedan. 2. Length: 4475 mm. 3. Width: 1706 mm. 4. Height: 1469 mm. 5. Wheelbase is 2603 mm. 6. Equipped with a 5-speed manual transmission. 7. Drive type is front-engine, front-wheel drive. 8. Front suspension uses MacPherson strut independent suspension. 9. Rear suspension uses a compound torsion beam non-independent suspension.

9

1

Share

Can a slightly bulged tire still be used?

Tire bulges, even if very small, are not recommended for continued use. Firstly, tire bulges mostly occur on the sidewall (tire wall) because they are caused by localized breakage of the sidewall's cord layers. The sidewall is the most vulnerable part of a tire. Once a tire bulges, it not only affects driving but also significantly increases the risk of a blowout. Most importantly, it poses a major safety hazard. Below is relevant information about tire safety: 1. If you are considering replacing the tire, you can have it inspected at a 4S shop or a professional auto repair shop. If the damage is indeed minor, it can be repaired and continue to be used. However, if the damage is severe, the tire must be replaced immediately. 2. Tire repairs can be understood as "locking the stable door after the horse has bolted." The strength and quality of the tire can never be restored to their original levels. Therefore, instead of spending money on repairs, it is better to invest a bit more and replace the tire directly. 3. If you decide to replace the tire, the two tires on the same axle must be of the same brand, model, tread pattern, load index, and speed rating. There are many causes of tire bulges, such as incorrect tire pressure, poor road conditions, accidental impacts, aggressive driving, etc.

2

4

Share

What is the Difference Between Calibration and Bench Testing?

Simply put, calibration is a process of optimizing various control parameters of each control unit. Bench testing, on the other hand, refers to testing the quality of gasoline, engine oil, diesel, gear oil, etc., by simulating the operation process of an automobile engine. It generally belongs to large-scale projects, requiring the coordination of various instruments and equipment for data detection. More details are as follows: 1. Gasoline Engine Bench Testing: The results of gasoline engine bench testing are the basis for determining the quality grade of gasoline engine oil. For example, the MS-ⅡD engine test is used to evaluate the ability of lubricating oil to prevent rust or corrosion of the valve group under low-temperature and short-distance driving conditions, and to evaluate API SE, SF, and SG grade gasoline engine oils. The Chinese standard test method includes SH/T-0512 Gasoline Engine Oil Low-Temperature Rust Evaluation Method (MS Procedure ⅡD). The foreign standard test methods include MSⅡD ASTM STP 351H-I. 2. Engine calibration is essentially a process of optimizing intake, fuel injection, and ignition control. Engine matching work involves setting appropriate values for various parameters of the Engine Control Unit (ECU) through various project matches under a specific Engine Management System (EMS) to meet the requirements of the best air-fuel ratio and the best ignition advance angle for the vehicle's power, economy, reliability, safety, and emission performance.

17

0

Share

Is Insurance Valid for a New Car Without License Plates?

Insurance for a new car without license plates is valid because there is no direct relationship between the license plate and the validity of the insurance. Currently, insurance policies take effect from midnight on the day after the policyholder purchases the insurance. For example, if a policyholder purchases auto damage insurance on September 30, the insurance will take effect at 00:00 on October 1. Below is relevant information about new car insurance: 1. You can purchase insurance for a new car even if it doesn't have license plates, and only after purchasing compulsory traffic insurance can you obtain license plates. The documents required for registering a new car include: ID card, vehicle parameter table, vehicle purchase tax receipt, insurance policy, vehicle certification, and the second and fourth copies of the car invoice. The owner can choose to have the dealership handle the process or go directly to the insurance company. 2. It is important to note that while not having license plates does not affect the validity of the insurance, it directly impacts the insurance claims. According to relevant regulations, if the insured vehicle has any of the following circumstances, the insurance company will not provide compensation.

7

3

Share

What is the fuel tank capacity of the Mercedes-Benz C-Class?

The fuel tank capacity of the Mercedes-Benz C-Class is 66 liters, and the recommended fuel grade is 95 octane gasoline. When refueling, it is essential to use the fuel grade specified by the manufacturer. The Mercedes-Benz C-Class is a mid-size sedan with body dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, and a wheelbase of 2920mm. It is equipped with a 4-cylinder 1.5T 156 horsepower turbocharged engine, paired with a 9-speed automatic transmission. In terms of exterior design, the Mercedes-Benz C-Class features a simple and elegant front grille design, with a single grille and dual waistline combination, enhancing its sporty and youthful appeal, exuding a strong sense of fashion.

11

3

Share

Should the positive or negative terminal be connected first when installing a car battery?

How to Clean Car Leather Seats?

What brand is the Santana engine?

Can a slightly bulged tire still be used?

What is the Difference Between Calibration and Bench Testing?

Is Insurance Valid for a New Car Without License Plates?

What is the fuel tank capacity of the Mercedes-Benz C-Class?

Is the BMW 8 Series All-Wheel Drive?

What does rear mean on a vehicle?

How to remove the glove box of Cavalier?

What Causes the Yellow Engine Light to Illuminate in BMW?