Should the parking brake be pulled up or released?

How to Fix Wiper Blade Chattering?

The solutions for wiper blade chattering are as follows: 1. Replace with new wiper blades. 2. Lift the wiper arm, remove the blade, and adjust the angle between the arm and windshield until it fits snugly against the glass. 3. Have the motor inspected at a repair shop. Wiper blades, also known as windshield wipers, are blade structures installed in front of the windshield. Their purpose is to remove rain, snow, and dust from the vehicle's windshield, improving driver visibility and enhancing driving safety. The reasons for wiper blade chattering include: 1. Aging or hardening of the wiper blade. 2. Misalignment of the wiper arm. 3. Insufficient motor power.

5

3

Share

Why is the central control screen not lighting up?

Inspection process for a non-lighting central control screen: 1. If the central control screen is black and not lighting up, you can first try restarting the screen by turning the ignition on and off. If this doesn't resolve the issue, it is likely due to poor contact in the wiring. It is necessary to promptly check whether there are any loose connections in the wiring. If there are, this will naturally cause the central control screen not to light up. In this case, simply reconnecting the loose parts properly should solve the problem. Of course, it could also be due to aging of the power signal cable. You can try replacing it with a new one. If the black screen issue is resolved, it confirms that the problem was indeed with the power signal cable. 2. If after checking the above two scenarios the central control screen still remains black, it is probably because the screen has been used for too long, leading to a malfunction in the power supply module. This not only causes lag but, in severe cases, results in a black screen. It could also be due to defects in the circuit design. However, issues like module abnormalities and design defects are beyond the scope of DIY fixes and require inspection, repair, or replacement at a professional repair shop.

20

1

Share

What Causes a Strong Gasoline Smell in the Car?

Here are the reasons for a strong gasoline smell in the car: 1. Under conditions of very low external temperatures, when the water temperature and exhaust pipe temperature are low, combined with the cold start of the engine during winter driving, the mixture tends to be richer. As a result, some of the mixture cannot fully combust and is directly expelled through the exhaust pipe, leading to a noticeable gasoline smell. This is a normal phenomenon. 2. It may be due to issues with the carbon canister or the carbon canister solenoid valve, causing an overly rich mixture during startup. 3. If the local temperature is low and there is excessive carbon buildup inside the engine, the mixture may not atomize properly, also leading to this phenomenon. 4. If the solenoid valve remains closed, gasoline vapor in the carbon canister will accumulate and eventually fill the entire canister. The excess vapor will then escape into the atmosphere, resulting in a gasoline smell. 5. A leaking fuel injector can cause an overly rich mixture, and the unburned mixture will be expelled through the exhaust pipe, leading to a strong gasoline smell.

11

4

Share

Do hybrid cars need to be charged?

No need to charge. The "electricity" in hybrid technology does not come from external charging facilities. Hybrid vehicles simply do not have charging devices. Relevant details are as follows: 1. The hybrid system means that when the vehicle does not require high power from the engine, part of the engine's power is used to generate electricity and stored in the battery. Additionally, the kinetic energy reduced during vehicle deceleration and braking is converted into electrical energy and stored in the battery, a process known as "regenerative braking." This is the source of the "electricity" in hybrid dual-power technology. 2. The electrical energy stored in the battery is fully utilized as driving force during vehicle operation, reducing fuel consumption while enhancing power. The "electricity" circulates within the hybrid dual-power system, enabling hybrid vehicles to have "electricity" available without the need for charging.

20

3

Share

Is the Hyundai CVT transmission equipped with a steel belt or a steel chain?

Performance-oriented CVT transmissions worldwide tend to adopt the chain solution. The structural differences between chains and steel belts are as follows: 1. A CVT steel belt is based on two embedded steel belts as foundational support, with hundreds of steel plates clamped onto the metal belt. This push-plate structure can only transmit power by "pushing," utilizing the hardness of the material between the push plates to form thrust. Under external force, the push plates compress, and during power transmission, the driving pulley tightly presses against the entire side of the steel belt to create static friction, thereby pushing the driven pulley to rotate via the steel belt. 2. The CVT chain differs significantly in structure from the steel belt. The chain does not directly contact the pulley but transmits torque by compressing the intermediate rocker pins. Structurally, the chain consists of two bundles of annular steel plates and tension plates, with each bundle composed of 12 layers of high-tensile thin steel plates stacked together. Patented T702 high-strength steel is inserted between each group of steel plates to form rocker pins for connection, achieving a tensile strength of up to 2000 MPa. This chain structure can only transmit power by "pulling." The driving pulley compresses the chain's "rocker pins" to generate static friction, driving the chain to transmit torque.

2

0

Share

What Are the Reasons for Excessive Vehicle Exhaust Emissions?

Reasons for excessive vehicle exhaust emissions: 1. Abnormal engine operation: The engine may experience issues such as misfiring, spark plug oil leakage, or oil mixing. When accelerating, the engine runs unevenly and lacks power. 2. Dirty vehicle systems: This usually occurs in relatively new vehicles, but the test results show excessive emissions, or the excess is minor (only a few percent or fractions of a percent). This indicates that the vehicle's exhaust treatment system (including the catalytic converter and oxygen sensor) is not significantly faulty. The cause of excessive emissions may be due to the three major systems (intake system, exhaust system, and fuel system) being too dirty. 3. Catalytic converter failure: A faulty catalytic converter is the primary reason for excessive vehicle exhaust emissions. The catalytic converter is the most important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 4. Oxygen sensor damage: In engines using catalytic converters to reduce exhaust pollution, the oxygen sensor is an essential component. It detects the oxygen concentration in the exhaust and sends feedback signals to the ECU, which controls the fuel injector to adjust the fuel injection volume. This keeps the air-fuel ratio of the mixture near the theoretical value, ensuring more complete fuel combustion. 5. Vehicle aging: If the vehicle has traveled over 450,000 kilometers or is more than 15 years old, various components may show significant aging, poor contact, inadequate sealing, or insufficient pressure.

11

3

Share

Should the parking brake be pulled up or released?

How to Fix Wiper Blade Chattering?

Why is the central control screen not lighting up?

What Causes a Strong Gasoline Smell in the Car?

Do hybrid cars need to be charged?

Is the Hyundai CVT transmission equipped with a steel belt or a steel chain?

What Are the Reasons for Excessive Vehicle Exhaust Emissions?

Does the ETC card have a specific orientation for insertion?

Can ETC be transferred to another vehicle when changing cars?

What is Proper Wheel Alignment?

What is the maximum speed limit on Chinese highways?