Should the old driver's license be destroyed?

Can You Press the Accelerator While in Half-Clutch?

You can press the accelerator while in half-clutch. More details about clutch semi-engagement are as follows: 1. Clutch semi-engagement refers to an unstable connection state of the clutch, where the driver gradually reduces the pressure on the clutch pedal, causing the driving plate and the driven plate to be in a state of both rotating and slipping. 2. Manual transmission vehicles often require semi-engagement for various operations, but prolonged semi-engagement can lead to clutch wear. 3. Semi-engagement is still necessary when starting the car; otherwise, the car may jerk. 4. Some racing cars only have full engagement and disengagement states and cannot move in semi-engagement. At low speeds, drivers of such cars may press the clutch first, rev the engine to increase RPM, and then release the clutch, using the jerking motion to move at low speeds (below 20km/h) to prevent the engine from stalling due to insufficient idle RPM or excessive load when engaging the clutch.

6

3

Share

What are the vision requirements for a driver's license physical examination?

Below are the vision requirements for a driver's license physical examination: 1. When applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart; 2. When applying for other driving licenses, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart; 3. No red-green color blindness. This aligns with the actual vision requirements in the driving school physical examination. Additional information: Wearing glasses is allowed for the driver's license physical examination, and corrected vision is acceptable—there is no requirement for it to be naked vision.

5

0

Share

How to Replace the Battery in an MG Car Key?

Method for replacing the battery in an MG car key: First, remove the mechanical key, then use a screwdriver to slowly pry open the key along the middle seam. If a screwdriver is not available, you can use scissors or a knife, but proceed gently and slowly. Then, peel off the round sticker to remove the battery, replace it with a new one, and firmly snap the back cover back into place. Here are some related precautions: 1. Improper battery replacement may damage the car key. 2. The replacement battery must be of the same specifications. Only use a new battery with the same rated voltage, size, and specifications to replace the old one. 3. Following the steps correctly should generally pose no issues. If problems arise during the replacement process that cannot be resolved, it is recommended to call the 4S store for assistance. 4. To prevent the key from failing prematurely, avoid pressing the unlock button outside the sensing area. Being within a 1-meter range of a magnetic field may cause the battery to magnetize and fail. 5. Always operate with dry hands, as moisture may cause the battery to rust.

6

2

Share

How to Fold the Mirrors on the Lavida?

Volkswagen Lavida is equipped with electric mirror adjustment function. Press the electric adjustment button to fold and retract the mirrors. Below are the maintenance methods for Volkswagen Lavida mirrors: 1. Clean the outer mirrors promptly: Keep the outer mirrors clean and clear. If mud or water gets on the mirrors, wipe them clean with a car cloth as soon as possible. 2. Use the electric folding function of outer mirrors cautiously in winter: If there is dew or rain/snow at night, the outer mirrors may freeze. Folding them electrically in this condition can easily damage the motor, making the mirrors unable to open. Therefore, it is advisable to turn off the electric folding function in winter. 3. Add rain guards and small round mirrors to the mirrors: If you live in an area with frequent rain, you can install a 70mai smart mirror rain guard to block rainwater to some extent. Additionally, installing small round mirrors can help reduce blind spots.

15

5

Share

What Causes the Low Tire Pressure Warning in Cars?

Here are the main reasons for the low tire pressure warning in cars: 1. Because the tire pressure has not been recalibrated, simply recalibrate the tire pressure on the central control panel. 2. If the low tire pressure warning appears some time after inflating the tires, but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. The relationship between tire pressure and car performance is as follows: 1. The relationship between tire pressure and load capacity: Tire pressure is an indicator of a car's load capacity. The load capacity of a car depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity. 2. The relationship between tire pressure and car power performance: Tire pressure greatly affects the rolling resistance coefficient. When the tire pressure decreases, the rolling resistance coefficient increases rapidly. This is because lower tire pressure causes greater deformation of the rolling tire, increasing hysteresis loss.

2

1

Share

Should the X-Trail get undercoating?

If your budget allows, it is advisable to apply undercoating. Undercoating is a rust prevention treatment for the car's chassis, essentially a high-tech adhesive rubberized asphalt coating. It protects against impacts from flying stones and gravel, prevents corrosion of the chassis metal in humid weather, and safeguards the chassis from rust and erosion, thereby better protecting the vehicle. Here’s a detailed overview of undercoating: 1. The benefits of undercoating can be summarized as rust prevention, corrosion resistance, noise reduction, and impact protection. The primary functions of undercoating are impact resistance and corrosion prevention. 2. While driving, gravel and stones kicked up from the road can hit the chassis. When driving over uneven surfaces or speed bumps, scraping the underside of the car is common. Undercoating effectively absorbs these impacts, preventing damage. 3. In humid climates, the chassis is prone to water accumulation and corrosion, leading to rust and damage. Undercoating covers exposed metal, forming a protective layer that isolates it from external elements. 4. Additionally, much of the noise heard inside the car while driving comes from the chassis. Undercoating provides some level of sound insulation and noise reduction.

10

3

Share

Should the old driver's license be destroyed?

Can You Press the Accelerator While in Half-Clutch?

What are the vision requirements for a driver's license physical examination?

How to Replace the Battery in an MG Car Key?

How to Fold the Mirrors on the Lavida?

What Causes the Low Tire Pressure Warning in Cars?

Should the X-Trail get undercoating?

What is the normal throttle angle for the Volkswagen EA888?

What is the drive mode of the BMW X3?

How many wheels does the Corolla Hybrid's handbrake brake?

Where is the battery for jump-starting in a Mercedes-Benz E240?