Should the old Corolla use 5w30 or 5w40 engine oil?

1 Answers
JustinAnn
07/30/25 5:21am
The old Corolla should choose 5W30 engine oil. Here are specific methods for selecting engine oil for cars: 1. Performance selection: If you care about the long-term performance of the engine oil, you can choose Mobil engine oil; if you focus on the cleaning effect of the engine oil on the engine, you can use Shell lubricating oil; if you need lubricating oil with strong oil film toughness, it is recommended to use Castrol. 2. Driving conditions: If you often drive in congested areas, the vehicle is older, or for long-distance heavy-load transportation, the viscosity of the lubricating oil can be appropriately increased. 3. Engine type: For naturally aspirated engines, mineral oil and semi-synthetic oil can be used. Compared with naturally aspirated engines, turbocharged engines have a more compact structure and operate in harsher conditions, requiring higher-grade lubricating oil with better fluidity, preferably fully synthetic oil.
Was this review help?
8
1
Share
More Forum Discussions

What is the Correct Method for Adding Car Refrigerant?

Automobile air conditioning refrigerant, commonly referred to as car refrigerant, is mainly divided into two types in vehicles: environmentally friendly 134a and non-environmentally friendly R12. The correct method for adding car refrigerant is as follows: 1. After evacuating the system, close the high and low pressure manual valves on the manifold pressure gauge. 2. Connect one end of the middle hose to the refrigerant can injection valve fitting: open the refrigerant can valve, then loosen the nut at one end of the manifold pressure gauge hose to allow gas to escape for a few minutes, then tighten the nut. 3. Open the high-pressure side manual valve to the fully open position and invert the refrigerant can. 4. Inject the specified amount of liquid refrigerant from the high-pressure side: close the refrigerant can injection valve and the high-pressure manual valve on the manifold pressure gauge, then remove the gauge. When adding refrigerant to the system from the high-pressure side, the engine should be in a non-starting state, and do not loosen the low-pressure manual valve on the manifold pressure gauge to prevent hydraulic shock.
19
0
Share

What does the 4S in a car 4S store mean?

The 4S in a car 4S store refers to Sale (whole vehicle sales), Sparepart (spare parts), Service (after-sales service), and Survey (information feedback). Advantages of car 4S stores: 1. Service. Generally, the staff in 4S stores have undergone systematic training, providing comprehensive services. 2. Brand. Each 4S store represents a car brand, and the store basically covers all models under its brand, so consumers can have a more comprehensive selection when choosing a car. 3. Interaction. Car 4S stores regularly hold various activities and interact with customers, integrating the corporate and brand culture into the customer base. Disadvantages of car 4S stores: 1. High cost. 2. High risk.
13
4
Share

Does converting from gasoline to natural gas affect the engine?

Converting from gasoline to natural gas does affect the engine, and the impacts are: 1. It may burn the engine valve working surface and the valve itself, causing excessively small valve clearance and affecting engine performance; 2. Spark plugs are prone to breakdown; 3. It may lead to the destruction or blockage of the catalytic converter; 4. The engine warning light may illuminate. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Regularly removing carbon deposits from the engine; 5. Timely replacement of the vehicle's air filter, oil filter, and fuel filter; 6. Checking if the spark plugs are damaged.
11
2
Share

Location of the Cadillac XTS Cabin Air Filter

The cabin air filter of the Cadillac XTS is located inside the glove compartment on the passenger side. Additional information about the cabin air filter is as follows: 1. The cabin air filter is a component that requires regular replacement. If not replaced for an extended period, it can affect the performance of the air conditioning system and the health of the vehicle's occupants. 2. To remove the cabin air filter, first take out the glove compartment on the passenger side. Then, you will see the cover of the cabin air filter. Open the cover to take out the filter. Steps to replace the cabin air filter: 1. Open the glove compartment and locate the central partition. Remove the four screws. 2. Take out the glove compartment. 3. After removal, you will see the cover of the cabin air filter. 4. Pull out the old filter. 5. Finally, insert the new cabin air filter, close the cover, and reinstall the glove compartment partition.
4
3
Share

What to Do If the Driver's License Has Not Been Renewed?

If the driver's license has not been renewed, you can complete the renewal procedures at the vehicle management office where the license was issued, or through the "Traffic Management 12123" APP or the "Police-Medical-Post" service points at postal business halls. The specific process is as follows: Renewal at the Vehicle Management Office: The motor vehicle driver should bring the required materials and apply for renewal at the vehicle management office where the driver's license was issued. The vehicle management office will process the renewal within one working day after approval. Renewal via the "Traffic Management 12123" APP: Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the information. The new license is usually delivered by mail. Visit the "Police-Medical-Post" service points at postal business halls for renewal. The entire process, from registration and medical examination to the production of the new license, takes only half an hour. Currently, this service is only available in a few cities, such as Hangzhou.
5
3
Share

How to Determine if a Compressor is Good or Bad?

Methods to determine if a compressor is good or bad are: 1. Use a multimeter to measure its resistance. If the sum of the resistance between SC and RC equals the resistance between RS, the compressor is normal. If the resistance deviates significantly or there is no resistance between the three, the compressor is damaged; 2. Use a multimeter to check the power supply. If it shows power is being supplied but the compressor does not start, you can replace the starting capacitor. If the compressor still does not start after replacing the capacitor, the compressor is damaged. The working principle of a compressor is: it draws refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the radiator, and the refrigerant changes from a gaseous state to a liquid state, increasing the pressure.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.