Should the new Sylphy use 92 or 95 octane gasoline?

2 Answers
MacAutumn
07/24/25 4:58pm
The new Sylphy uses 92 octane gasoline. In terms of power, this car is equipped with a 1.6L naturally aspirated engine. Compared to turbocharged engines, naturally aspirated engines have relatively lower power output, making 92 octane fuel sufficient. Relevant information about gasoline octane ratings is as follows: 1. The gasoline octane rating is the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the octane rating, the stronger the anti-knock performance. 2. Standard gasoline is composed of isooctane and n-heptane. Higher octane ratings are not necessarily better; the appropriate gasoline octane rating should be selected based on the engine's compression ratio. 3. To evaluate the anti-knock performance of fuel, two methods are generally used: the Motor method and the Research method. The evaluation is usually conducted on a specially designed single-cylinder engine with variable compression ratio.
Was this review help?
1
2
Share
McEmilio
08/11/25 9:22am
I've been driving a Sylphy for six years and have always used 92-octane gasoline without any issues. The engine compression ratio of this car is designed for 92-octane fuel, and the manufacturer's manual clearly states that 92 is acceptable. Many people think using 95-octane is better for the car, but it's actually a waste of money because higher-octane gasoline only has better anti-knock properties, which the Sylphy's engine doesn't need. Of course, if you're driving in high-altitude areas or taking long trips in the summer, filling up with a couple of tanks of 95-octane won't hurt. Normally, 92-octane is fine, but remember not to skimp on quality and use substandard fuel—excessive carbon buildup can cause more trouble. Stick to reputable gas stations, and regular maintenance is more important than anything else.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What are the steps for car glazing?

Car glazing steps are as follows: Wash the car body clean, use paper tape to cover all rubber parts on the car body such as emblems and letters, then pour the glaze onto the car body. Use a glazing machine to apply the glaze from head to tail. After the glaze fully penetrates the paint surface and dries, wipe it clean with a non-woven cloth. Repeat the above steps and apply two more layers to complete the glazing process. Here is more information about car glazing: Car glazing is one of the car paint maintenance procedures, belonging to medium-level beauty treatments. The main component of car glaze is derived from petroleum, featuring special permeability and adhesion. Through the rapid vibration and friction of a polishing machine, the glaze penetrates into the car's surface paint, forming a protective glaze layer. This not only enhances the gloss of the car paint but also provides functions such as UV protection, acid rain resistance, oxidation resistance, anti-static properties, and high-temperature resistance.
13
2
Share

What is the actual fuel consumption of the Verano?

20 Verano actual fuel consumption is 5.2L per 100 kilometers. The factors affecting car fuel consumption are as follows: Engine displacement: Engine displacement has a certain impact on car fuel consumption, but this impact is a fixed value. Tire pressure: Car fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. Driving conditions: The driving conditions of the car will also affect fuel consumption. The combined fuel consumption is calculated by dividing the total emissions of urban and suburban driving cycles by the total mileage completed in these two cycles, and then using the emissions to calculate the corresponding fuel consumption value.
18
2
Share

What is the Snake Badge Mustang?

Ford Mustang with a snake badge refers to the Mustang GT500, commonly known as the Shelby Cobra. This model is jointly developed by Ford and Shelby, representing the most powerful variant in the current Mustang lineup. Below are the key details about this vehicle: Exterior Features of GT500: The most distinctive visual identifier is the Cobra emblem. It features numerous aggressive aerodynamic kits, including a hexagonal front grille, wide-body side panels, pronounced fenders, an exaggerated rear spoiler, and a large diffuser at the bottom. Powertrain Configuration of GT500: Equipped with a 5.2L V8 supercharged engine, it delivers a maximum horsepower of 710Ps and a peak torque of 847Nm, paired with a 7-speed dual-clutch transmission.
15
2
Share

What Causes the Car Battery Light to Illuminate?

The battery light turning red indicates a malfunction in the vehicle's charging system or power supply system. Below are the specific reasons for the battery light turning red: Engine Fault: A loose alternator belt or tensioner pulley can cause the power supply system to stop working, resulting in the battery light illuminating. Battery Connection Fault: Severe oxidation or looseness of the battery terminals can lead to poor contact, causing the battery light to illuminate. The solution involves cleaning and tightening the battery terminals.
19
0
Share

What are the requirements for obtaining a B2 license?

The requirements for obtaining a B2 license are: having a local household registration in the area where the public security traffic police vehicle management office is located, being at least 21 years old, and meeting the physical conditions required for applying for a B2 driver's license. Those without local household registration are only allowed to obtain a C1 license first and then upgrade to a B2 license. The specific content of the B2 driving test and the vehicle types permitted under a B2 license are as follows: Specific test items: The B2 license's subject three test includes: preparation before getting on the vehicle, simulated night lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. Vehicle types permitted under a B2 license: A B2 license is for driving heavy-duty and medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Heavy-duty and medium-duty trucks are mostly trucks, and of course, it also includes all vehicle types permitted under lower-level driver's licenses.
2
0
Share

What to Do When Your Driver's License Reaches 6 Years?

You can renew your driver's license within 90 days before its expiration date when it reaches 6 years. The required documents for renewal include your ID card, driver's license, medical examination certificate, photos, etc. Below are the steps for renewal: You should fill out the "Motor Vehicle Driver's License Application Form" and submit a medical condition certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. Within 90 days before the expiration of your driver's license, apply for renewal at the vehicle management office where your driver's license was originally issued. When applying for renewal, prepare the original and a copy of your ID card, your driver's license, which can be obtained at any driver's license processing point; doctors stationed at county-level or higher medical institutions can conduct the medical examination on-site and fill out the "Motor Vehicle Driver's Physical Condition Certificate". Bring three recent, front-facing, half-inch color photos with a white background, where the head occupies two-thirds of the photo length.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.