Should the Motor Vehicle Inspection Exemption Label Be Affixed to the Vehicle?

2 Answers
StDelilah
08/26/25 5:12am
Should the Motor Vehicle Inspection Exemption Label Be Affixed to the Vehicle_58 Auto The motor vehicle inspection exemption label must be affixed to the vehicle and should be pasted in the upper right corner of the front windshield as required by regulations. According to the regulations, motor vehicles driven on the road must display the vehicle license plate, place the inspection compliance label and insurance label, and carry the vehicle registration certificate. The vehicle license plate must be displayed clearly and completely as required, and must not be intentionally obscured or damaged. Vehicle inspection exemption refers to exempting vehicles that meet the exemption conditions within six years from the on-site inspection process. Owners only need to apply for the inspection exemption label every two years and affix it to the vehicle as required. Vehicle annual inspection refers to the annual inspection of vehicles that have already obtained official license plates and registration certificates, conducted according to the safety technical conditions for motor vehicle operation.
Was this review help?
8
2
Share
SanJeffrey
09/08/25 7:09am
As a veteran driver with years of experience, I'm often asked whether the inspection exemption decal needs to be displayed on the vehicle. The answer is yes, it must be displayed. According to Chinese traffic regulations, even if your vehicle qualifies for the inspection exemption policy (such as new vehicles being exempt from on-site inspection for the first 6 years), you're still required to obtain an inspection exemption decal from the DMV or online every two years. You then need to manually affix this decal to the upper right corner of the windshield. The reason is simple: it allows traffic police to quickly verify your vehicle's compliance during roadside checks, preventing fines for not displaying the decal. I know a friend who forgot to display it and got fined 200 RMB, plus wasted half a day. While some cities now accept electronic certificates via mobile apps, I still find physical decals more reliable, especially in remote areas with poor signal. When applying it, make sure it doesn't obstruct your view while remaining clearly visible. In short, displaying it saves hassle, complies with regulations, and prevents unexpected troubles.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

Should the Honda VSA button be turned on?

Honda VSA button should be turned on. Honda VSA is a vehicle stability control system, an advanced global technology that enhances vehicle stability and driving safety. In addition to traditional anti-lock braking and traction control functions, the VSA system also includes anti-skid control functionality. Taking the Honda Haoying as an example: 1. Dimensions: The car measures 4634mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. 2. Exterior design: The Honda Haoying adopts a front face design language similar to the tenth-generation Accord, featuring a thick chrome trim strip that runs across the top of the grille and connects with the headlights on both sides. The grille uses a horizontal multi-slat design, creating a strong sense of layering. The front bumper design enhances the aggressiveness of the front face, resulting in a highly aesthetic overall design.
14
5
Share

What is the name of Honda's voice assistant?

Honda's voice assistant is called "OK-Honda". Simply call out this name to activate the voice assistant, which can then perform functions such as route navigation, weather queries, and initiating AI chat. Honda, officially known as "Honda Motor Co., Ltd.", is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange (TYO) and the New York Stock Exchange (NYSE). Its current product line mainly consists of four major businesses: automobiles, motorcycles, power products, and aircraft. Voice assistant activation method: First, on the central control panel, simultaneously press the VOL, TEL, and brightness buttons to enter the system background interface, then select the detailed information and settings options; enable CarPlay, and after enabling, return to the central control start interface. Connect your phone to the USB port, and the Apple CarPlay option on the page will light up. Select it to successfully activate. Advantages of car voice control: Car voice control has two main advantages. One is the ability to play music via voice commands while driving, enhancing the driving experience. The other is the ability to control multiple functions with voice commands, eliminating the need to take hands off the steering wheel or eyes off the road, greatly improving safety.
14
5
Share

What is the function of the ECON button in Honda cars?

ECON stands for the low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode can be considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: Sport mode can be used during aggressive driving. When Sport mode is activated, the throttle pedal response becomes highly sensitive, and the transmission delays shifting. The transmission will only upshift when the engine speed reaches the redline. After switching to Sport mode, the engine speed is maintained at around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it achieves reduced fuel consumption and energy savings, but the car's power output weakens. ECON can be understood as an abbreviation for "economy." In most cases, it is recommended to keep ECON mode on. Only when high torque output is needed (e.g., when climbing a hill) or when driving at very high speeds should ECON mode be turned off. Pressing the ECON button activates the low-carbon and eco-friendly driving mode. Subsequently, the ECU, engine, and transmission operate intelligently in the most fuel-efficient manner, achieving optimal fuel economy through rapid upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although ECON mode is simple and effective to operate, it does not work under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the Eco mode automatically deactivates. This means if the speed exceeds the economical range (typically between 60-90 km/h), ECON mode will not save fuel. The key to ECON mode is the independent operation of the car's computer while driving, making it effective. Therefore, during idle parking or in N, P, or manual modes, ECON does not function. When overcoming significant resistance or requiring high torque output (e.g., when climbing a hill), the ECU prioritizes ensuring sufficient power to drive the car, and ECON mode will not work in such cases.
1
1
Share

What engine is used in the Bisu M3?

This model is equipped with a 1.5-liter naturally aspirated engine across the entire lineup. Below are the relevant details about the engine: 1. The 1.5-liter naturally aspirated engine in the Bisu M3 has the model code F15C. This engine delivers 114 horsepower and a maximum torque of 147 Nm. The engine's maximum power is achieved at 6,000 rpm, and its maximum torque is available between 3,600 and 4,400 rpm. 2. The Bisu M3's engine features multi-point fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. 3. This engine is paired with a 5-speed manual transmission.
4
2
Share

Can 3M adhesive be reused after peeling it off?

3M adhesive cannot be reused after peeling. While 3M adhesive has excellent bonding capabilities, its effectiveness diminishes after being peeled off and reused. It is recommended to remove the old adhesive and apply new 3M tape. The optimal storage conditions for 3M double-sided tape are a temperature of 19-23°C and humidity of 40-60%. Below are methods for removing 3M adhesive residue: 1. Apply essential balm to the area and wipe with a soft cloth, repeating several times until clean. 2. Visit an auto detailing shop and use a plastic cleaner. 3. Use a car wash cloth with toothpaste and water to scrub repeatedly for 10-15 minutes until clean.
7
4
Share

What are the hazards of not changing power steering fluid?

Failure to replace power steering fluid in a timely manner can lead to damage to the steering gear and power steering pump. Here is more information about power steering fluid: 1. Power steering fluid is a special liquid used in automotive power steering pumps, which makes the steering wheel much lighter through hydraulic action. It is similar to automatic transmission fluid, brake fluid, and shock absorber fluid. 2. To prevent the power steering fluid from becoming dirty or deteriorating, it is generally recommended to replace the fluid every 2 years or 30,000 kilometers. If the fluid level is below the scale mark, the fluid becomes thin, or its color turns black, it indicates that the power steering fluid needs to be replaced.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.