···
Log in / Register

Should the Land Cruiser 4000 use 92 or 95 octane gasoline?

4 Answers
Frederick
07/29/25 2:00pm

Land Cruiser 4000 should use 95 octane gasoline. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled and cracked from petroleum, which can be used as fuel. Taking the 2016 Land Cruiser as an example, its body dimensions are: length 5170mm, width 1975mm, height 1930mm, wheelbase 2850mm, minimum ground clearance 230mm, and fuel tank capacity 138l. The 2016 Land Cruiser is equipped with a 4.0l naturally aspirated engine, with a maximum power of 202kw and a maximum torque of 385nm, matched with a 5-speed automatic transmission.

Was this review help?
9
5
Share
Annabeth
08/13/25 5:43am

I've been driving the Land Cruiser 4000 for several years and only use 95-octane gasoline. The manual clearly recommends high-octane fuel, as gasoline with higher octane ensures smoother engine combustion and avoids annoying issues like knocking. Using 92-octane may save money in the short term, but over time, the engine response becomes sluggish, and fuel consumption may even increase. I tried using 92-octane for a month and noticed a clear lack of power during acceleration, and even had to repair carbon buildup once. Although fuel prices are high now, spending a little extra to protect my beloved car is worth it, and regular maintenance is also crucial. My friend uses 95-octane for long-distance trips, and it's much more worry-free. In short, don't save small money only to spend big on repairs—sticking with 95-octane is the most reliable choice.

Was this review help?
11
1
Share
Expand All
LaJoshua
10/10/25 6:37am

I use the Land Cruiser 4000 for commuting and sometimes fill it with 92-octane fuel to save money. The manual recommends 95-octane, but I find 92-octane sufficient for daily use, and the engine hasn't had any issues. The difference in octane ratings mainly affects the risk of knocking, with higher octane offering better performance. However, 92-octane works fine on flat roads; it just feels weaker when climbing hills or accelerating on highways. With rising fuel prices, I'm more cost-conscious now. 92-octane is a few yuan cheaper per liter, saving me a significant amount over a year. But I make sure to clean the throttle regularly to prevent carbon buildup. If the budget allows or for long trips, using 95-octane is a safer choice.

Was this review help?
15
0
Share
Expand All
JasmineDella
11/23/25 7:48am

The Land Cruiser 4000 engine features high-pressure design and requires 95-octane gasoline. Using 92-octane fuel with insufficient anti-knock properties may cause engine knocking, potentially damaging pistons and valves, leading to higher repair costs. The owner's manual is the authoritative guide—never arbitrarily use lower-grade fuel, as it increases carbon deposits and reduces engine lifespan. While regular maintenance and fuel additives can assist upkeep, the core principle remains steadfast use of 95-octane fuel.

Was this review help?
13
4
Share
Expand All
More Forum Discussions

Which region does the license plate prefix 'Yu' represent?

Yu is the license plate prefix for Henan Province. The license plate prefixes for various cities in Henan Province are as follows: Yu A for Zhengzhou, Yu B for Kaifeng, Yu C for Luoyang, Yu D for Pingdingshan, Yu E for Anyang, Yu F for Hebi, Yu G for Xinxiang, Yu H for Jiaozuo, Yu J for Puyang, Yu K for Xuchang, Yu L for Luohe, Yu M for Sanmenxia, Yu N for Shangqiu, Yu P for Zhoukou, Yu Q for Zhumadian, Yu R for Nanyang, Yu S for Xinyang, and Yu U for Jiyuan City. The functions of license plates include: 1. Numbering and information registration for vehicles; 2. Identifying the region to which a vehicle belongs; 3. Tracing the owner and registration details of a vehicle based on its license plate.
10
5
Share

What is the method for removing the spark plugs of the Chery Tiggo 8?

Chery Tiggo 8 spark plug removal method is: 1. Open the engine hood of the Chery Tiggo 8 when the engine is cold, and locate the position of the spark plugs; 2. Remove the engine decorative panel and the fixing screws on the ignition coils; 3. Disconnect the connectors on the ignition coils and pull out all the ignition coils; 4. Use a special spark plug removal tool to remove all the spark plugs from the cylinder head; 5. Install the new spark plugs into the cylinder head and tighten them to the specified torque. Taking the 2020 Chery Tiggo 8 as an example, it is a mid-size SUV with body dimensions of: length 4700mm, width 1860mm, height 1746mm, wheelbase of 2710mm, and a curb weight of 1509kg.
15
4
Share

What gear should be in when waiting at a red light?

When waiting at a red light, you should shift to N or neutral. The steps for waiting at a red light are: 1. When you see the red light from a distance, gently press the brake to slow down; 2. When you reach the intersection with the red light, press the clutch all the way down; 3. While pressing the clutch all the way down, press the brake all the way down; 4. After the car stops, shift the gear to neutral and pull up the handbrake; 5. Release the clutch and brake, then wait for the red light. The steps for starting the car are: 1. Get in the car and sit properly; 2. Start the car; 3. Press the clutch and brake; 4. Release the handbrake and shift to first gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, and the car will start moving.
17
2
Share

How to Check the Remaining Fuel Level in an Audi A4L?

Audi A4L checks the remaining fuel level through the fuel gauge on the central instrument panel. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm. The fuel tank capacity is 56 liters. The 2020 Audi A4L features a five-link independent suspension at the front and a five-link independent suspension at the rear. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 270Nm. It is paired with a 7-speed dual-clutch transmission.
20
1
Share

Where is the dg15t engine produced?

dg15t engine is produced in China. The engine is a device that provides power for automobiles, determining the vehicle's power, fuel economy, stability, and environmental performance. The function of the engine: It converts the thermal energy of gasoline into mechanical energy by burning the gas in a sealed cylinder to expand the gas, pushing the piston to do work. The engine consists of: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed.
13
3
Share

Where is the glove box?

The glove box is located in front of the passenger seat. It consists of a glove box light, door hinge, door lock mechanism, and damper. The glove box light provides illumination when the owner opens the glove box, lighting up the interior of the storage compartment. The glove box door lock comes in hook-type and pin-type configurations. The method for removing and installing the glove box is as follows: Open the car's glove box, remove the piston buffer clip on the right side, rotate the fixing button on the inner right side counterclockwise, and there are knobs on both the left and right sides inside that need to be removed. The glove box can then be opened to its maximum extent. Use a clip pry tool to remove the fixing pins on the left and right sides of the glove box. After removing the pins, the glove box can be taken off.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.