Should the Honda Haoying use 92 or 95 gasoline?

1 Answers
LawsonMarie
07/30/25 5:26am
According to the official vehicle manual recommendation, the Honda Haoying should use 92-octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will also indicate the recommended grade. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the use of some new technologies, the compression ratio alone cannot determine the gasoline grade, as high-compression engines can also be tuned to use lower-octane gasoline. This is because, in addition to the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Honda Haoying occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increase in octane number may change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Because the octane number is too low, the fuel's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, if the knocking is severe, it indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.
Was this review help?
13
2
Share
More Forum Discussions

How to Remove the Brake Pads of a Toyota Crown?

Removing the brake pads of a Toyota Crown involves the following steps: 1. Remove the tire and loosen the caliper mounting bolts. 2. Take off the caliper and release the brake pad clips. 3. Remove the brake pads and use large pliers or a specialized piston-pushing tool to retract the caliper piston. 4. Install the new brake pads, secure the clips, and reassemble the new components following the original steps. Information about brake pads is as follows: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking is decisively influenced by the brake pads. 2. Brake pads (brake-lining) generally consist of a steel plate, an adhesive heat-insulating layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards.
13
5
Share

Why is the Vios chassis so high?

A higher chassis provides better safety on rural roads when going to the countryside or farm stays, reducing the risk of bumps and scrapes. The chassis refers to the combination of the four major systems in a car: the powertrain, running gear, steering system, and braking system. It supports and mounts the car's engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. The chassis consists of four major systems: the powertrain, steering system, braking system, and running gear. Below is an introduction to these four major systems of the car chassis: 1. Powertrain: The function of the powertrain is to transmit the engine's power to the driving wheels. Different cars have slightly different chassis compositions. For example, for trucks and some sedans, the chassis generally consists of a clutch, manual transmission, universal joint drive, and drive axle. Nowadays, more and more sedans use automatic transmissions, and their chassis includes an automatic transmission, universal joint drive, and drive axle, replacing the clutch and manual transmission with an automatic transmission. For off-road vehicles (including SUVs, or sport utility vehicles), a transfer case is also included. 2. Running gear: The function of the running gear is to support and mount the car's various components and assemblies, transmitting and bearing various loads from inside and outside the vehicle to ensure normal operation. It mainly consists of the frame (body), axle, suspension, and wheels. 3. Steering system: The function of the steering system is to ensure the car can travel in the direction selected by the driver. It mainly consists of the steering control mechanism, steering gear, and steering linkage. Modern cars commonly use power steering systems. 4. Braking system: The function of the braking system is to slow down, stop, and reliably park the car. The car braking system generally includes two independent braking systems: the service brake system and the parking brake system. Each braking system includes brakes and braking transmission mechanisms. Modern cars' service brake systems are generally equipped with an anti-lock braking system (ABS).
11
0
Share

Why is the Prado called 'Badao'?

Toyota Prado's nickname 'Badao' originates from the name used for the imported Prado models in China before it was locally produced as a joint venture. The name 'Badao' is also a phonetic adaptation from when the Toyota Prado was first imported into China. Below is a detailed introduction to the Prado: 1. The Toyota Prado is a full-size SUV known for its outstanding off-road performance and comfortable driving experience. Whether in the mountains or on plateaus, the Prado is ubiquitous, leading off-road enthusiasts who yearn for freedom across vast landscapes. 2. Thanks to its robust body-on-frame construction and four-wheel-drive system, the Prado has consistently earned a strong reputation for its off-road capabilities across generations. The current Prado model is equipped with Toyota's latest 7GR-FKS 3.5L engine, replacing the previous 2.7L version. The 3.5L engine features D-4S dual injection technology, delivering a maximum power output that is 4kW higher than the older 4.0L engine, though torque is reduced by 16Nm.
13
1
Share

How to Shift Gears in Subject 2?

Subject 2 gear shifting involves specific steps: first press the clutch, release the accelerator, shift gears, then release the clutch and accelerate. Details about the Subject 2 test are as follows: 1. Reverse Parking. This assesses the driver's ability to maneuver the car in a confined space. Reverse parking is a key evaluation point in the driving test, requiring the driver to correctly reverse the vehicle into a garage from both sides while moving. 2. Parallel Parking. Parallel parking is increasingly common in urban areas, especially as parking spaces in formal lots become scarce. Many streets now have designated "parallel parking spots" marked along their sides. 3. Hill Start and Stop. This is another evaluation point in Subject 2 of the driving test, testing the driver's coordination of steering, braking, and clutch control. 4. Right-Angle Turn. This evaluates the driver's ability to correctly steer and accurately judge the difference between the inner and outer wheels when navigating sharp turns. 5. S-Curve Driving. The test requires the vehicle to navigate an S-shaped path of specified width without crossing the edge lines, demonstrating smooth and controlled steering.
7
4
Share

How Often Should Transmission Fluid Be Changed in a New Car?

Automatic transmission fluid is generally changed every 40,000 kilometers. Below is an introduction to transmission fluid: 1. Transmission fluid requires regular replacement, especially for automatic transmissions. The specific replacement interval varies depending on the vehicle model, and design requirements differ as well. The most accurate approach is to refer to your car's maintenance manual, which provides detailed instructions. 2. Manual MT transmission fluid is the cheapest to replace and has a relatively long replacement interval, typically lasting around 80,000 kilometers. Most models require about 3 liters of fluid. 3. Automatic transmission fluid is usually changed every 40,000 kilometers. The total fluid capacity for most transmissions is 6-8 liters, but due to structural reasons, it is often impossible to completely replace all the fluid at once. 4. Typically, CVT fluid begins to degrade after reaching this mileage. The total fluid capacity inside the transmission is generally 6-8 liters, with some models requiring around 10 liters. Similar to AT transmissions, due to the presence of a torque converter, it is usually not possible to completely replace all the fluid at once.
1
0
Share

How Does an Automotive Rain-Sensing Wiper Work?

Currently, the two most widely used mainstream sensors are optical sensors and capacitive sensors. Below is the working principle of automotive rain-sensing wipers: 1. When the sensor detects rainwater falling on the windshield, it sends a command to the wiper to start working, and the rainwater on the front windshield is cleared. 2. The wiper is commanded to start working, and the rainwater on the front windshield is cleared. Here is additional information: 1. Optical sensors operate based on the principle of light refraction. An optical sensor contains a light-emitting diode that emits a conical beam of light, which passes through the front windshield. When the windshield is dry and free of rainwater, almost all the light is reflected back to an optical sensor. When it rains, rainwater accumulates on the windshield, causing some of the light to deviate. This results in a change in the total amount of light received by the sensor, thereby detecting the presence of rainwater. 2. The larger the area of reflected light that the optical sensor can receive, the more detailed the information obtained. Optical sensors are highly precise and can even accurately determine the number of raindrops falling on the sensing area.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.