Should the Honda CR-V 1.5T use 92 or 95 octane gasoline?

1 Answers
JourneyFitz
07/29/25 4:17pm
The Honda CR-V 1.5T uses 92 octane gasoline. Additional information: 1. Introduction to the Honda CR-V 1.5T: This 1.5-liter turbocharged four-cylinder engine produces 192 horsepower with a compression ratio of 10.3. The engine has a maximum power output of 142 kW and a maximum torque of 243 Nm. The official 0-100 km/h acceleration time is 9.3 seconds, and the official combined fuel consumption is 6.6 L/100 km. 2. Exterior design: The CR-V Plug-in Hybrid version further combines Honda's advanced driving performance, intelligent quality, dynamic design, and cutting-edge technology. The exterior of the new car has been upgraded, offering four body colors: Starry Night Blue, Crystal Black, Crystal White, and Elegant Gold. The CR-V Sharp·Hybrid e+ features blackened headlights connected to a horizontal chrome strip, creating a strong sense of layering. At the rear, a full-width chrome strip connects with the LED taillights, enhancing recognition and visual width. It also comes with exclusive PHEV badging, fully showcasing its stylish and technological appeal.
Was this review help?
18
2
Share
More Forum Discussions

Should High Beam Be Turned Off Before Temporary Parking?

Temporary parking requires turning off the high beam. Here are the relevant details: 1. Simulated night lighting: High beams cannot be used during temporary parking. The simulated night lighting must include no fewer than 5 items, generated randomly with no fixed order. All lighting operations must wait until the voice announcement is complete—never rush the lighting, or you may easily fail. 2. High-low beam operation: This is the most common reason for failing. Even if the operation is correct, the system may deem it wrong. Nowadays, electronic proctors monitor the test. When performing high-low beam switching, you should flick the lever upward and release it to complete one alternation. This method is correct, but if the lever stays in the high beam position too briefly, the system may fail to detect it and mark it as an error. This issue also frequently occurs during gear shifting or braking.
2
4
Share

What is the state of turning the steering wheel one full turn to the left?

Turning the steering wheel one full turn to the left means the wheels are turning to the left. Here is some information about the steering wheel: 1. Introduction: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. 2. Function: The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and mounting clips or screw holes corresponding to the driver's airbag (DAB). 3. History: More than 120 years ago, the steering wheel initially installed on steam cars by automobile inventors was mounted on a vertical steering column. Its drawback was that it was inconvenient for the driver to operate and obstructed the view.
20
4
Share

What is the most appropriate speed to shift into 4th gear?

Shift into 4th gear when the vehicle speed reaches above 35 mph but below 45 mph. After shifting gears (either up or down), you should gently press the accelerator pedal and slowly release the clutch pedal. Wait until the vehicle speed stabilizes before fully releasing the clutch pedal to prevent the car from jerking or causing clutch plate wear. If a downshift fails, you can add some "empty throttle" or decelerate before attempting to downshift again. When shifting gears while driving, pay attention to the following points: 1. Never look down while shifting gears: This is a very dangerous behavior. In urban areas or on highways, looking down while shifting gears may cause the vehicle to veer off course, potentially leading to accidents. 2. Pay attention to the clutch: Always press the clutch pedal all the way down. Otherwise, the engine and transmission won't fully disengage, which can cause abnormal noises and damage to the gears.
1
2
Share

How to display the tire pressure of Lavida?

Lavida's tire pressure display will show a yellow exclamation mark with several small dots on the instrument panel, indicating the need to check the tire pressure. Tire pressure refers to the air pressure inside the tires. In car maintenance, the engine is the heart of the car, and its damage will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. Lavida is a compact sedan under Volkswagen, with dimensions of 4670 mm in length, 1806 mm in width, 1474 mm in height, and a wheelbase of 2688 mm. Lavida is equipped with three engines: a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.5-liter naturally aspirated engine.
16
3
Share

What Causes Poor Acceleration in Small Cars?

Reasons for poor acceleration in small cars: clutch slippage and engine intake system malfunction. Clutch Slippage: The main causes of clutch slippage are insufficient friction on the clutch friction plates; shifting gears too early or disengaging gears before the clutch is fully engaged; prolonged driving with the clutch partially engaged or coasting with the clutch pedal depressed; and abnormal wear of the clutch plates caused by abruptly applying throttle when shifting gears or disengaging gears before the operation is fully completed. Engine Intake System Malfunction: In addition to fuel, the engine requires air. If components such as the air filter or throttle become clogged or malfunction, leading to insufficient air intake, the car will experience weak acceleration, slow speed increase, and a jerky sensation.
20
3
Share

What are the reasons why the rotary knob of Baojun 510 cannot shift gears?

The reasons why the rotary knob of Baojun 510 cannot shift gears are as follows: 1. Transmission failure: The internal pawl mechanism may be stuck. For automatic transmissions, the P gear also serves as the vehicle's parking gear. In this case, a mechanic should be called to inspect and troubleshoot the issue; 2. Car battery is dead: Generally, if the car battery is dead, all electrical components in the car will not function. Please check if other electrical components in the car are receiving power; 3. Transmission is not receiving power: This type of fault is relatively rare because modern automatic transmission cars use electronic shifting controlled by a computer. If there is an issue with the internal circuit of the transmission, faults such as the gear not receiving power or the gear indicator light not turning on may occur.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.