Should the Front Wheels Cross the Line in Subject 2 Slope Parking Test?

What Types of Vehicles Can an A2 Driver's License Drive?

A2 driver's license is the highest record for truck-type permitted driving models. Holders of an A2 license are permitted to drive all types of trucks. They are also allowed to drive B1 medium-sized 19-8 passenger buses, small passenger vehicles with 7 seats or fewer, and sedans. This includes C4 three-wheeled vehicles and wheeled self-propelled mechanical cranes. Below is more information about the A4 driver's license: 1. Drivers holding licenses for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks must report to the traffic management department of the public security authority for inspection within thirty days after the end of each scoring cycle. 2. Drivers with points recorded in a scoring cycle should undergo annual inspection within 30 days after the end of the scoring cycle. During the inspection, they must participate in no less than three hours of learning on road traffic safety laws and regulations, safe and civilized driving, emergency response, and other knowledge, and receive case-based education on traffic accident warnings.

19

0

Share

How long should you wait to turn off the engine after driving on the highway?

After high-speed driving, do not suddenly stop and turn off the engine. You should wait for more than a minute after the turbocharging system stops working before shutting it down. However, in general, it takes several minutes from leaving the highway to parking, so there is no need to extend the low-speed driving time additionally. More details are as follows: 1. Some cars can be turned off immediately after high-speed driving: Some car engines have a cooling system that can continue to operate for a while after the engine is turned off to help dissipate heat from the turbocharger. For such cars, there is no need to idle after high-speed driving; you can turn off the engine directly. 2. Cooling principle: When the engine is just started, the coolant will undergo a small cycle. At this time, the coolant does not pass through the radiator for cooling, which helps the engine warm up quickly. When the engine reaches its normal operating temperature, the coolant will switch to a large cycle, passing through the radiator to dissipate heat, thereby maintaining the engine within a reasonable temperature range.

4

1

Share

What to Do If 95 Gasoline is Accidentally Filled with 92?

Occasionally filling a car that requires 95 gasoline with 92 gasoline does not have a significant impact. Simply wait until the gasoline is used up and then refill with 95 gasoline. However, long-term use of lower-grade gasoline in a high-grade model can severely affect the engine's normal operation, leading to knocking, and in severe cases, it can reduce the engine's lifespan and increase maintenance costs. The following are the differences between 95 and 92 gasoline: 1. Different Octane Values: 92 gasoline contains 92% 'isooctane,' which has strong anti-knock properties but weaker anti-knock capabilities. 95 gasoline contains 95% 'isooctane,' offering stronger anti-knock capabilities. 2. Different Performance Characteristics: 95 gasoline provides excellent acceleration performance, with faster power response and less vehicle vibration compared to 92 gasoline. 92 gasoline may result in louder cold-start noises and weaker power output.

1

2

Share

What Causes Evaporative Emission System Leaks?

Here are the specific causes of evaporative emission system leaks: 1. Poor sealing: The fuel tank cap gasket is faulty, or the sealing at pipe connections is inadequate, leading to leaks. 2. Poor contact: Poor welding at the carbon canister friction weld or loose seals at the carbon canister engine solenoid valve or carbon canister atmospheric vent solenoid valve. 3. Punctures creating leak points: Pipes, carbon canister, or fuel tank punctured by gravel, causing leaks. Below is additional information about the evaporative emission system: 1. Impact of leaks: If the evaporative emission system has leaks, gasoline can easily evaporate, and fuel vapors will escape from the fuel tank. If these vapors are not controlled, they not only pollute the atmosphere but also waste energy. 2. Malfunction indicator lamp (MIL): China VI vehicles require the OBD system to detect evaporative emission system leaks. If the leak exceeds the equivalent of a 1mm (0.04-inch) diameter hole, the OBD must illuminate the MIL.

20

0

Share

Can 75% Alcohol Be Brought into a Car?

75% alcohol cannot be brought into a car. Here are the relevant details: 1. Alcohol is prone to spontaneous combustion: Under normal temperature and pressure, alcohol is a flammable, volatile, colorless, and transparent liquid. Medical alcohol has a concentration of 75%, with a flash point of 20 degrees Celsius. During summer, outdoor temperatures can reach over 40 degrees Celsius at noon. If a car is parked outdoors under direct sunlight, the temperature inside the car and the trunk can soar to over 50 degrees Celsius. Placing alcohol in the trunk while driving can cause the alcohol to collide repeatedly, leading to spontaneous combustion or explosion, which may result in the car catching fire. 2. Other flammable items: Besides alcohol, items like non-car perfumes, lighters, and fireworks should not be kept inside a car, especially in the trunk. These items are highly flammable and explosive. Once the temperature inside the car rises, they can easily explode or catch fire, causing unavoidable damage. Therefore, regardless of the type of vehicle, it is advised not to store alcohol or other flammable and explosive items inside the car.

10

4

Share

What are the differences between a three-cylinder engine and a four-cylinder engine?

The differences between a three-cylinder and a four-cylinder car: different balance and different ignition intervals. The three-cylinder engine uses a three-throw crankshaft. Without balancing measures, it can only achieve static balance but not dynamic balance. The four-cylinder engine uses a four-throw flat crankshaft, where not only the resultant centrifugal inertial force is zero, but the centrifugal inertial moment is also zero, achieving dynamic balance by itself. Here are the relevant details: 1. Different balance: For a four-stroke engine, the main difference between a three-cylinder and a four-cylinder engine is the balance. The balance of a three-cylinder engine is not as good as that of a four-cylinder engine. 2. Different ignition intervals: The ignition sequence of a three-cylinder engine is generally 1-3-2, with an ignition interval angle of 240 degrees. The crankshaft rotation angle for one stroke of the engine is 180 degrees, meaning that within the adjacent ignition intervals, there is a 60-degree crankshaft rotation where all three cylinders consume power simultaneously. The ignition sequence of a four-cylinder engine is generally 1-3-4-2, with an ignition interval angle of 180 degrees. The power strokes of each cylinder are tightly connected without any intervals.

6

3

Share

Should the Front Wheels Cross the Line in Subject 2 Slope Parking Test?

What Types of Vehicles Can an A2 Driver's License Drive?

How long should you wait to turn off the engine after driving on the highway?

What to Do If 95 Gasoline is Accidentally Filled with 92?

What Causes Evaporative Emission System Leaks?

Can 75% Alcohol Be Brought into a Car?

What are the differences between a three-cylinder engine and a four-cylinder engine?

What is a car PCV valve?

Is Insurance Valid for a New Car Without License Plates?

What happens if you press the clutch and accelerator at the same time?

What are the techniques for shifting gears in a manual transmission?