Should the front or rear fog lights be turned on during the Subject 3 test?

1 Answers
Jackie
07/30/25 1:17am
During the Subject 3 test, both front and rear fog lights are turned on simultaneously. When the front fog lights are activated, the rear fog lights will also turn on at the same time. Method to turn on fog lights: After turning on the parking lights, you can then activate the fog lights. Among these, the front fog lights can be turned on individually. The rear fog lights can only be activated together with the front fog lights and cannot be turned on separately. Styles of fog light switches: There are mainly two styles of fog light switches: button-type and rotary-type. Different car manufacturers may have their preferred methods for activating fog lights. The button-type fog light switch is characterized by its ease of operation—pressing it directly achieves the desired function. The rotary-type fog light switch is integrated into the left stalk.
Was this review help?
6
1
Share
More Forum Discussions

What are the effects of adding a full 4L of engine oil during maintenance?

Adding a full 4L of engine oil during maintenance can affect fuel consumption and engine performance. Here is an introduction to the related aspects of engine oil: 1. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower marks on the dipstick. If too much oil is added, the oil volume will expand as the engine temperature rises, increasing the pressure in the oil chamber and the running resistance, which can lead to reduced engine power and increased fuel consumption. 2. Overfilling oil: If too much oil is added, the crankcase breather pipe may leak oil, and the increased crankcase pressure can loosen the oil seals due to the oil pressure, leading to oil leaks. 3. Heat dissipation: Overfilling engine oil can affect the engine's heat dissipation.
17
1
Share

What happens if the car transmission oil is not changed for a long time?

If the transmission oil is not replaced within a certain cycle, the consequences will become increasingly serious, with multiple hazards. Advantages of transmission oil: Transmission oil plays roles in cleaning, lubricating, cooling, and sealing for the transmission. Due to the specific operating environment inside the transmission, the quality of the oil has a certain shelf life. The performance of the oil will decline, generating more impurities, which leads to accelerated wear of transmission components, earlier occurrence of failures, or a higher failure rate. Notes: 1. Manual transmission oil can generally be replaced at 60,000 kilometers; 2. Whether it is manual transmission oil or automatic transmission oil, both need to be inspected and replaced within a certain cycle.
17
3
Share

Is it okay to drive without clothes?

There is no specific regulation in the laws and statutes regarding this, so theoretically, it is permissible to drive shirtless, but it is not recommended. The "Road Traffic Safety Regulations of the People's Republic of China" stipulate the following for motor vehicle drivers: When driving a vehicle, the driver must carry a driver's license and vehicle registration certificate; It is prohibited to lend, alter, or forge a driver's license; It is prohibited to hand over the vehicle to someone without a driver's license; It is prohibited to drive after drinking alcohol or to drive while wearing slippers; It is prohibited to smoke, eat, chat, or engage in any other behavior that may hinder safe driving; It is prohibited to exceed the number of passengers specified on the vehicle registration certificate.
9
0
Share

What is the purpose of an emergency escape ramp on highways?

Here are the functions of emergency escape ramps on highways: 1. Ensure road traffic flow: They allow out-of-control vehicles to quickly exit from the main lane, preventing such vehicles from affecting traffic on the main road and ensuring safe passage. 2. Assist vehicle braking: Vehicles experiencing brake failure at high speeds pose significant safety risks if they cannot exit the main road promptly, especially in areas requiring deceleration. Emergency escape ramps provide a controlled area for these vehicles to slow down and stop. 3. Prevent vehicle loss of control: They help vehicles with brake failure to decelerate and stop, which is the original intention behind setting up these ramps. In the event of a vehicle losing control, braking within the shortest possible time can prevent injuries or significant vehicle damage.
17
5
Share

Can 2000 Grit Sandpaper Be Used to Polish Car Glass?

No problem, this type of water sandpaper can be used to polish car glass. Here is some relevant information about car glass: 1. Introduction: The production of car glass involves heating the glass in a furnace to near its softening temperature, then quickly transferring it to fans with varying cooling intensities for uneven cooling. This creates different stress levels between the main viewing area and the peripheral areas of the glass. Generally, glass produced this way is zone-tempered glass. 2. Maintenance Method: Maintain consistent temperatures inside and outside the car. After using the car for the day, do not immediately lock the car and leave. Instead, open the doors to ventilate and wait until the interior temperature drops to match the exterior temperature (which takes about a minute). Then, turn on the power and use the wipers to clear any snow or water from the windshield. At this point, close and lock the doors. The next morning, simply sweep away the snow from the windshield. If there is no ice beneath the snow, you can drive off immediately.
11
1
Share

Is it necessary to drain the fuel when replacing the fuel pump?

Replacing the fuel pump generally does not require draining the fuel. Here is a detailed introduction to automotive fuel pumps: 1. Function: The fuel pump serves as the interface between the high-pressure and low-pressure fuel circuits. Its function is to generate fuel pressure in the common rail by controlling the fuel output. Its role is to increase fuel pressure for high-pressure injection to achieve atomization. 2. Purpose: The main purpose of the fuel pump is to act as a power source for hydraulic devices such as jacks, heading machines, extruders, and cotton gins. 3. Installation precautions: During the installation of the fuel pump, all openings should be covered to prevent debris from entering the machine.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.