Should the Equinox use 92# or 95# gasoline?

1 Answers
OAlexa
07/29/25 10:56pm
The Equinox is equipped with two turbocharged engines across all models, so it is recommended to use 95# gasoline. Differences between gasoline grades: Gasoline with different grades has different octane ratings. The higher the grade, the higher the octane rating, and the better the anti-knock performance. If the gasoline grade is too low, the anti-knock performance will be poor, which can lead to engine knocking during operation. Knocking is an abnormal combustion phenomenon in the engine. When the piston is in the compression stroke, it moves upward to compress the air-fuel mixture, increasing its pressure and temperature. If the gasoline's anti-knock performance is insufficient, the air-fuel mixture may ignite before the spark plug fires. Which vehicles are suitable for 92# gasoline: Most naturally aspirated engines can use 92# gasoline.
Was this review help?
10
0
Share
More Forum Discussions

What engine does the Mustang use?

The Mustang is equipped with a 2.3T turbocharged engine and a 5.0L naturally aspirated engine. In terms of power, the Ford Mustang offers two powertrain options: a 2.3T turbocharged engine and a 5.0L naturally aspirated engine. The 2.3T turbocharged engine delivers a maximum power output of 220 kW and a peak torque of 434 Nm, while the 5.0L engine produces a maximum power of 343 kW and a peak torque of 556 Nm. In the transmission system, both engines are paired with a 10-speed automatic transmission. The 2.3T turbocharged engine is a four-cylinder unit featuring direct fuel injection and twin-scroll single turbo technology, which not only enhances the engine's power but also improves its fuel efficiency.
15
3
Share

Should You Use Low Beam or High Beam When Driving on Highways at Night?

When driving on highways at night, use high beams because highway speeds are high and require longer visibility distances. In dark, relatively unoccupied road conditions without streetlights, high beams are the correct method to ensure adequate visibility. Additional relevant information is as follows: 1. The use of lights on highways depends on specific driving conditions. High beams can be used when driving in areas without streetlights to expand the field of vision, but they must be switched to low beams when encountering oncoming vehicles. 2. High beams can be used on highways at night because highways typically have central barriers that block the high beams while eliminating concerns about oncoming traffic posing a danger. Avoid using high beams when driving in urban areas, as cities have better lighting conditions. The high angle of high beams can easily dazzle oncoming drivers and pedestrians, impairing their vision and creating unsafe conditions. Moreover, it is considered an impolite driving behavior.
2
1
Share

What is the steering play in the XPeng P7?

First, it is the cumulative effect of the mechanical clearance between the steering wheels in the entire steering system. Second, manufacturers intentionally create play through the design of the rack and pinion structure, aiming to ensure that minor passive wheel deflection during acceleration does not affect the driver. Steering wheel play: Steering wheel play refers to the free movement (also known as free angle or travel) of the car's steering wheel. It is the angle the steering wheel can turn without causing the steering wheels to deviate. It results from the combined clearance in the entire steering system and the steering wheels. Causes: The main cause is the habitual practice of turning the steering wheel to its limit. It's best to avoid doing this when stationary; wait until the car has slightly started moving before turning. Additionally, regular wheel alignment checks are recommended.
20
2
Share

What is the reason for the constant yellow ABS light on the car's dashboard?

The reason for the constant yellow ABS light on the car's dashboard: This indicates a fault in the ABS system, which requires immediate repair. The ABS system is the Anti-lock Braking System in a car. This system prevents the wheels from locking up during emergency braking. If the wheels lock up during emergency braking, the car may skid uncontrollably, making it impossible for the driver to control the trajectory or slow down, which is very dangerous. The ABS system allows the wheels to maintain a state of rolling and sliding during emergency braking, enabling the driver to slow down the vehicle while still controlling its trajectory. This allows the driver to both decelerate and avoid obstacles. When the ABS system is active, the ABS indicator light on the dashboard will flash. If there is a fault in the ABS system, the ABS indicator light on the dashboard will remain constantly lit.
17
3
Share

What Causes Numbness in the Foot When Pressing the Accelerator Pedal?

Reasons for numbness in the foot when pressing the accelerator pedal: It may be due to a malfunction in the car's engine, causing resonance between the engine and the accelerator pedal, which results in noticeable vibrations in the accelerator while driving. There are several possible causes for these vibrations, such as loose screws in certain parts of the engine or internal component failures. Common engine issues include problems with the air filter or aging engine mounts. One possible reason is that the air filter has become loose, leading to prolonged engine vibrations that loosen the screws. In this case, it's necessary to check if the screws are loose and adjust their positions if needed. Another reason could be the aging of the engine mounts due to long-term use or wear. Over time, worn-out engine mounts can cause vibrations in the accelerator pedal. Replacing the engine mounts directly can resolve this issue.
5
5
Share

What are the differences between the Mercedes-Benz V260 and V250?

The differences between the Mercedes-Benz V260 and V250 are: 1. Different production origins: The Mercedes-Benz V260 is produced by Fujian Mercedes-Benz and is domestically manufactured; the V250 is an imported American version. 2. Different features: The Mercedes-Benz V260 has an adaptive cruise control system; the V250 does not have an adaptive cruise control system. The Mercedes-Benz V-Class is a business vehicle under the Mercedes-Benz brand, equipped with a 2.0T engine to meet the needs of business reception. The extended versions of the V260 and V250 have the same body dimensions, with a length, width, and height of 5140mm, 1928mm, and 1880mm respectively, and a body structure of a 5-door, 7-seat MPV.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.