Should the Emgrand GS use 5w30 or 5w40?

What is the appropriate tire pressure for Wuling Hongguang S?

The normal tire pressure range for Wuling Hongguang S is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Wuling Hongguang S is equipped with a tire pressure monitoring system (TPMS), which allows you to check the tire pressure by pressing the TPMS button in the central control panel area. The TPMS effectively monitors tire usage, real-time tire pressure, and tire temperature to ensure driving safety. Generally, a tire pressure exceeding 2.8bar is considered too high, while a pressure below 2.0bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, lowering driving comfort; accelerates uneven wear on the central tread, shortening tire lifespan; increases vehicle vibration, indirectly affecting other components; overstretches tire cords, reducing elasticity and increasing driving load. Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; makes steering heavy and prone to deviation, compromising safety; increases movement of tire parts, causing abnormal heat due to excessive rolling; weakens cord and rubber functionality, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a blowout. If the TPMS warning light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes below, and an exclamation mark inside), it is usually due to one of the following three reasons: Abnormal tire pressure: Typically triggers an alarm when below 1.8bar or above 3.0bar. In this case, inspect and adjust the tire pressure. TPMS not reset: After inflating the tires, failing to reset the TPMS promptly causes the system to retain old data, lighting the warning light. Simply reset the TPMS to resolve this. Damaged TPMS sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving (e.g., by impact), the warning light will activate. A damaged sensor must be replaced.

106

Share

Do Vehicles Need to Observe Traffic Lights When Making a U-Turn?

If the gap is marked with a dashed line, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. In such cases, the vehicle can make a U-turn directly, provided it does not interfere with other normally moving vehicles and ensures its own safety. However, if the gap is marked with a solid line, the U-turn must cross the pedestrian crossing and is subject to traffic signal regulations. Note that making a U-turn on the pedestrian crossing is prohibited. Violations will result in a penalty of 3 demerit points and a fine of 200 yuan, as stipulated by the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China." When making a U-turn that requires crossing the pedestrian crossing, drivers must yield to pedestrians: 1. If pedestrians are walking on the right side of the pedestrian crossing and have not reached the centerline of the road, vehicles on the left side should slow down and allow them to pass safely. 2. If pedestrians are waiting outside the boundary of the motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and allow them to pass safely. 3. If pedestrians cross the boundary between motorized and non-motorized lanes, vehicles must stop; failing to do so is a violation and will be penalized. 4. If pedestrians enter the motorized lane (Lane A) via the pedestrian crossing, vehicles in Lane B must slow down and allow them to pass safely. Failing to stop for pedestrians in Lane A is a violation and will be penalized. 5. If pedestrians wait at the centerline without entering the motorized lane, vehicles must stop; otherwise, it is a violation and will be penalized. 6. If pedestrians cross the centerline into the motorized lane, vehicles must stop; otherwise, it is a violation and will be penalized. 7. If the road is divided by a green belt and pedestrians are waiting in the middle, vehicles must slow down and allow them to pass safely. Permissible U-turn scenarios: 1. If there is a U-turn sign at the intersection, follow the U-turn signal if present. If no signal exists, make the U-turn without obstructing other vehicles or pedestrians. 2. If there is no explicit prohibition of U-turns or left turns at the intersection, U-turns are allowed. "No explicit prohibition" means the absence of "No U-turn" or "No Left Turn" signs and solid centerlines. 3. U-turns are permitted on yellow grid lines. These lines, marked at intersections prone to congestion due to temporary stops, prohibit parking but allow U-turns unless there is a central barrier. 4. If there is a U-turn signal, obey it strictly—only proceed on green. 5. If "No Left Turn" and "U-turn Permitted" signs coexist, U-turns are allowed but left turns are not. Note that "No U-turn" does not equate to "No Left Turn." Key precautions when making a U-turn: 1. Observe road markings—never U-turn on solid lines. Continue driving to find a suitable spot. 2. If a "No Left Turn" sign is present, U-turns are also prohibited at that intersection, as U-turns inherently involve left turns. 3. U-turns must be made from the innermost left-turn lane. Attempting from the second left-turn lane is prohibited. 4. Always yield to straight-moving vehicles. U-turns should not disrupt their flow, or the U-turning driver bears full accident liability. 5. Near intersections, lane arrows guide vehicle movement. Not all leftmost lanes have left-turn arrows—if marked with a straight arrow, U-turns are prohibited even without explicit "No U-turn" signs.

101

Share

Why is the car noise getting louder?

There are several reasons why a car's noise may become louder: 1. Engine overheating: Overheating can cause the engine to lose power. If the engine operates for extended periods, causing surface overheating, the cooling system may fail, resulting in increased engine noise. 2. Engine misfire: This mainly refers to one or more cylinders not functioning properly, typically manifested by intermittent exhaust flow and severe shaking of the exhaust pipe, accompanied by clear abnormal engine noises. It's necessary to inspect the condition of each ignition coil and cylinder spark plug.

116

Share

What does the car button 'a' mean?

Car button 'a' stands for the Brake Assist System (ABS). When the seat belt is properly fastened, pressing this button enables automatic braking for temporary stops, preventing the vehicle from rolling when the brake pedal is released. To resume driving, simply lightly press the accelerator pedal to disengage the brake and continue moving. The Brake Assist System complements the Anti-lock Braking System. ABS, or Anti-lock Braking System, is a technology developed by Robert Bosch GmbH for use in motorcycles and cars to prevent loss of control and increase braking distance, thereby enhancing vehicle safety.

112

Share

What is the Multivan car?

Multivan is a multi-purpose MPV from Volkswagen, based on the famous T-platform, and has always been positioned as a high-end business vehicle. Here is the relevant introduction of the Multivan: 1. Features: Headlight cleaning function, rear parking camera, electrically foldable exterior mirrors, welcome lights. 2. Safety performance: Tire pressure monitoring system, anti-lock braking system ABS, electronic stability system including electronic differential lock EDL, seat belt warning system, electronic brake force distribution system EBV, front and side airbags for the front seats, and rear curtain airbags.

118

Share

When will Fuzhou implement China VI emission standards?

Fuzhou began implementing the China VI emission standards on July 1, 2020. Here is relevant information about the China VI standards: 1. China VI standards: The China VI emission standards refer to the sixth-stage national standards for motor vehicle pollutant emissions testing. The requirements of the China VI emission standards are more stringent than those of the China V standards, including a 50% reduction in the carbon monoxide limit for motor vehicles, a 50% reduction in the limits for total hydrocarbons and non-methane hydrocarbons, and a 42% reduction in nitrogen oxide emissions. 2. Advantages: It can effectively shorten the time for replacing new vehicles.

114

Share

Should the Emgrand GS use 5w30 or 5w40?

What is the appropriate tire pressure for Wuling Hongguang S?

Do Vehicles Need to Observe Traffic Lights When Making a U-Turn?

Why is the car noise getting louder?

What does the car button 'a' mean?

What is the Multivan car?

When will Fuzhou implement China VI emission standards?

Will plugging a GPS tracker into the OBD port damage the car?

What to Do About High Fuel Consumption in a Cruze?

Where to Find the Production Date on Bridgestone Tires?

Where is the frame number of Opple electric vehicle?