Should the Clutch Be Pulled During Emergency Braking on a Motorcycle?

1 Answers
DeChloe
07/30/25 5:49am
If braking is required for stopping: pull the clutch, shift to neutral with your foot after braking, and release the clutch once the bike is fully stopped. If braking for deceleration: when encountering pedestrians, vehicles, or obstacles requiring brief deceleration, there is no need to pull the clutch. In practical operation: the clutch should only be pulled when the braking causes insufficient power and the engine is about to stall, at which point you should either stop or downshift. Clutch Introduction: The clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly secured to the rear plane of the flywheel by screws. The output shaft of the clutch serves as the input shaft of the transmission. Friction Clutch: The friction clutch is the most widely used and historically longest-standing type of clutch, primarily consisting of four parts: the driving part, the driven part, the pressing mechanism, and the operating mechanism.
Was this review help?
17
1
Share
More Forum Discussions

Which Cars Come with HUD Head-Up Display?

BMW 5 Series Li, Peugeot 3008, Peugeot 508, Audi A6, Audi A7, Lexus GS, and Land Rover Vision Concept are among the models equipped with HUD head-up displays. Due to the high cost of this system, it was previously only available in a few luxury cars priced in the million-dollar range. Here is more information about HUD head-up displays: 1. HUD stands for Head-Up-Display, which translates to a head-up display in Chinese. It utilizes augmented reality technology to project vehicle or road condition information onto the display (primarily the windshield). Different types of HUDs project varying data such as speed, time, and engine status. Most HUDs use innovative phosphors to project information onto the windshield via lasers. Some HUDs also integrate transparent screens to display critical information. 2. Installing an HUD head-up display in a car not only showcases a cool sense of technology but, more importantly, ensures safe and stable driving by allowing the driver to focus more on observing the road and driving, thereby enhancing travel safety on every trip.
18
3
Share

What does TRD mean on Toyota vehicles?

Toyota TRD stands for Toyota Racing Development. Below is some knowledge about TRD. Main TRD products: By vehicle model: TRD accessories for Toyota models. 1. CROWN (Crown) 2. REIZ/MARKX (Reiz) 3. PRADO 4. ALPHARD (Alphard) 5. YARIS/VITZ 6. CAMRY 7. 86 (GT86). Main TRD operations: 1. Advanced development: Utilizing new technologies to realize concept vehicles, including Toyota's next-generation technology development and concept prototype design, as well as auto show exhibitions. 2. Concept vehicle development: Leveraging extensive automotive manufacturing experience to design and develop new vehicle types (e.g., Himedic ambulance). 3. New material development: Carbon fiber materials (developed at the "Shonan Technical Development Center"). 4. Engine development: Equipped with advanced facilities for developing Toyota's mass-production engines, handling the entire process from engine development to vehicle assembly.
5
4
Share

Why did the dash cam suddenly stop lighting up?

Reasons why the dash cam suddenly stops lighting up: 1. The dash cam is out of power: If the dash cam is used continuously for a long time, it will reduce the battery life, and the screen will naturally go dark when the battery is depleted; 2. The dash cam's own screen saver: Similar to a computer screen, some dash cams will automatically turn off the screen to save power if not operated for a long time; 3. The dash cam has crashed: If the internal system of the dash cam becomes disordered, it can easily cause a crash; 4. The dash cam is damaged: If the dash cam is damaged due to a traffic accident or human factors, it is necessary to ask a professional to repair or replace it with a new one.
8
5
Share

What causes the EPC light to illuminate and the vehicle to shake in Volkswagen cars?

Volkswagen EPC light illumination and vehicle shaking can be caused by: 1. Dirty throttle body; 2. Poor fuel quality; 3. Abnormal cylinder pressure or poor operating conditions; 4. Intake system faults such as leaks or blockages. Taking the Volkswagen Lavida as an example, its body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of power, the Volkswagen Lavida is equipped with a 5-speed manual transmission, delivering a maximum torque of 145 Nm. The top speed of the Volkswagen Lavida is 190 km/h, with front-wheel drive, MacPherson strut front suspension, and torsion beam rear suspension.
20
2
Share

Can car maintenance be done outside of 4S shops?

According to regulations, car maintenance does not have to be performed at 4S shops, and car owners have the right to choose maintenance service providers. More details are as follows: 1. The "Three Guarantees Policy" for automobiles stipulates that if quality issues arise with household cars not maintained at manufacturer-authorized 4S shops, and these issues are not causally related to the maintenance, and no damage is caused by maintenance at other 4S shops, the dealer cannot be exempted from the three guarantees responsibility. Automakers linking warranty coverage to maintenance at 4S shops and mandating maintenance at 4S shops constitutes an unfair clause. 2. For new cars under warranty, if maintenance (such as oil, oil filter, or air filter changes) is performed outside, some 4S shops may claim that issues are caused by substandard oil or filters replaced elsewhere, thus voiding the warranty. Since fluid-related matters are difficult to verify, this can be troublesome. It is recommended that fluid replacements in critical systems like powertrain, brakes, and transmission be done at 4S shops, while consumables like cabin air filters can be replaced elsewhere.
18
0
Share

What Causes the Squeaking Sound When Driving?

When a car makes a squeaking sound while driving, it is most likely due to an issue with the engine belt. First, check the tightness of the engine belt. You can try pinching the drive belt with your fingers and twisting it. Note that this operation should be performed when the engine is cool. The twist angle should generally be below 90 degrees; otherwise, adjustment is needed. Below is an extended introduction to engine belts: 1. The timing belt in a car is responsible for opening the valves. If the valves open improperly, they can "hit the cylinder," causing the engine to fail instantly. Once the timing belt breaks, the engine will be immediately ruined, so it is essential to replace the timing belt regularly. Engine belts are divided into timing belts and water pump belts. Timing mechanisms can use either belts or chains. Chains are maintenance-free and do not require attention during the vehicle's lifespan, whereas belts, being rubber components, will age and need replacement. The replacement interval for belts generally ranges between 50,000 to 120,000 kilometers. 2. If the timing belt reaches the manufacturer's recommended replacement mileage, it is advisable to replace it, as a broken timing belt can cause the camshaft to damage the valves, leading to expensive repairs. The water pump belt typically needs replacement every 50,000 kilometers. If there is a squeaking sound during startup or acceleration, it is often due to insufficient tension in the water pump belt. If the belt is not severely aged, the issue can be resolved by adjusting the tension, and the belt can continue to be used. Even if the water pump belt exceeds the manufacturer's recommended mileage, it can still be used if it is not severely aged, but replacement may be necessary depending on the condition.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.