Should the Civic 1.5T Use 92 or 95 Octane Fuel?

1 Answers
MacIsabelle
07/30/25 6:27am
The manufacturer recommends using 92 octane fuel. The Civic model is equipped with an L15B8 engine, a 1.5-liter turbocharged 4-cylinder engine producing 177 horsepower, with a maximum power of 130 kW and a maximum torque of 220 Nm. It features direct fuel injection and an aluminum alloy cylinder head and block. Gasoline Octane Rating: The octane rating is classified based on the octane number, which represents the ratio of the gasoline's anti-knock properties to those of standard gasoline. A higher octane rating indicates stronger anti-knock performance, but it doesn't mean higher is always better. The appropriate gasoline grade should be selected based on the engine's compression ratio. 92 Octane Gasoline: 92 octane gasoline has an octane value of 92 and a heptane value of 8. It is suitable for mid-range vehicles (those with relatively low compression ratios). On December 18, 2013, the General Administration of Quality Supervision, Inspection and Quarantine and the Standardization Administration of China jointly issued the fifth-stage national standard for automotive gasoline—"Automotive Gasoline."
Was this review help?
13
4
Share
More Forum Discussions

How to solve the Roewe RX5 engine emission fault?

Engine emission faults are related to the oxygen sensor, which may be a false fault code of the oxygen sensor. If so, clearing it will suffice. The fault may also be related to the quality of the fuel added, causing inaccurate data monitored by the oxygen sensor. A diagnostic tool is required to determine this. When an engine emission fault occurs, the owner should promptly clean the engine. To maintain the engine in good working condition, using 95 or 97 octane gasoline can help resolve engine emission faults.
3
4
Share

How to Adjust the Fuel Consumption Display on the Teana?

On the dashboard interface displaying fuel consumption and average speed, press and hold the menu button on the steering wheel to reset the calculation. After turning off the vehicle, do not open the door immediately. At this time, check the dashboard to view the single-trip fuel consumption. With the engine running, press the dashboard button to view the vehicle's instantaneous fuel consumption. You can reset the data, and the vehicle will then display the current actual fuel consumption during subsequent driving.
11
4
Share

How to Enable Tesla Dashcam?

Owners need to prepare a USB drive with sufficient storage capacity and format it to FAT32. Manually create a folder named TeslaCam and insert the USB drive into the port. The vehicle will automatically recognize the USB drive and activate this feature. Open the folder on the USB drive, right-click on a blank area and select 'New Folder'. Rename the folder to TeslaCam to activate the dashcam.
4
1
Share

What is the best mileage for a used car?

3 years and around 50,000 kilometers is more cost-effective. Normally, most people would prefer to buy a nearly new car that's about a year old, but this isn't highly recommended. It's not that the car isn't good, but the price isn't justified. At best, this year's model might save you the purchase tax, but insurance savings aren't guaranteed. Moreover, if the car hasn't been in any major accidents, there are fewer sellers, and the prices tend to be higher. From the perspective of price and value retention, the depreciation rate is highest in the first three years, roughly around 30% of the car's original price. Over the next five years, the depreciation rate becomes more moderate, typically between 5%-10% annually. The condition of the car is the most important factor. Why is that? Because used cars are unique—each new car's usage environment from the moment it's driven off the lot is entirely different, and its purpose varies. Therefore, a newer car doesn't necessarily mean better condition, nor does a more expensive one guarantee good condition. Careful evaluation is essential. A car's lifespan is determined by its usage time and mileage. Generally, after a passenger car has been driven 150,000 to 200,000 kilometers, its technical performance noticeably declines, and repair costs increase.
1
2
Share

How to Activate the Jack Mode on the Touareg?

Sit in the driver's seat with all doors closed. Sit in the driver's seat with all doors closed, then press and hold the buttons on both sides of the driving mode adjustment roller for 3 to 5 seconds. After adjusting the mode, the OFF button for the left-side anti-skid control and the LOCK button on the right side will flash simultaneously. The vehicle's onboard computer screen will display "Jack Mode," indicating that the jack mode has been activated.
18
0
Share

How to proceed after successful online application for vehicle transfer registration?

Apply through the Traffic Management 12123 platform. After logging in, navigate to [Vehicle Services] —> [Vehicle Transfer Registration Application] to enter the business process. Fill in the vehicle details requiring the application, select the destination city on the transfer location interface, and check the destination identity proof. On the information confirmation screen, verify details such as owner, license plate type, license plate number, etc. After confirming accuracy, click to obtain the verification code.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.