···
Log in / Register

Should the Changan Eado Plus use 92 or 95 gasoline?

6Answers
SanKendra
09/07/2025, 03:40:39 AM

Both the 1.6L and 1.4T versions of the Changan Eado Plus can use either 92 or 95 gasoline. The difference between 92 and 95 gasoline is not about quality but rather the content of added isooctane, which affects the gasoline's anti-knock properties. 95 gasoline has a higher isooctane content, making it slightly more expensive and offering better anti-knock performance. Generally, it is not recommended to use gasoline with a lower octane rating than what the car manufacturer specifies or recommends. Using lower-octane gasoline can cause premature combustion, leading to engine knocking. Incomplete combustion can also increase carbon deposits, clogging ducts and injectors, and may result in reduced vehicle power and higher fuel consumption. Similarities between 92 and 95 gasoline: Same cleanliness: The misconception that higher-octane gasoline prevents carbon deposits is incorrect. Gasoline octane ratings only indicate the difference in isooctane content and have no relation to cleanliness. Same heat value: The claim that 95 gasoline is more fuel-efficient is incorrect. The national standard for gasoline density has a range, so even with the same 92 gasoline, a full tank's range can vary by up to 50 kilometers. Precautions for refueling: Gasoline octane rating: Gasoline comes in several types, each with different component ratios, leading to varying performance. Always check the gasoline octane rating before refueling. Avoid overfilling after the pump stops: Many gas station attendants may continue adding fuel after the pump stops to round up the charge. However, in summer, fuel expands due to high temperatures, which can damage the fuel tank. Fuel additives: Gas station attendants often recommend fuel additives, but these do not fundamentally solve engine carbon deposit issues. It's best to avoid using them. Beware of static electricity: In winter, dry climates can easily generate static electricity. Always take precautions against static electricity when refueling to prevent serious consequences.

Was this review help?
118
Share
StBethany
09/19/2025, 02:44:40 AM

As a long-time owner of the Yidong Plus, I can confirm the official manual clearly recommends 92-octane gasoline, which works perfectly fine. While 95-octane is a higher grade, its benefits are tailored for high-compression engines. The Yidong Plus engine is cleverly designed with a moderate compression ratio, allowing it to perform optimally with 92-octane while saving money. For my daily commute, using 92-octane saves me a few cents per liter, adding up to significant fuel savings over a year. Occasionally trying 95-octane won't harm the car, but long-term use is simply wasteful. I once accidentally filled up with 95-octane and noticed slightly smoother starts, but highway fuel efficiency remained unchanged. Bottom line: stick to the manual's recommendation and don't fall for gas station upsells.

Was this review help?
9
Share
Expand All
McAugust
11/02/2025, 02:06:02 AM

I'm someone who enjoys delving into automotive technology. The compression ratio of the Yidong Plus engine is typically around 10, which is a standard design, and it's perfectly adequate to use 92-octane gasoline. The octane rating corresponds to anti-knock performance; 92-octane has good anti-knock properties and is more cost-effective. While 95-octane has a higher rating and theoretically can reduce knocking under extreme conditions, such scenarios are almost never encountered in everyday driving with the Yidong Plus. The only advantage of using 95-octane is that the power output might be slightly smoother, but the difference is negligible and not wallet-friendly. I recommend sticking with 92-octane and regularly checking the spark plugs and fuel system.

Was this review help?
16
Share
Expand All
DiBrielle
12/16/2025, 02:10:05 AM

As a new owner of the Yidong Plus, I saw the manual specifies 92-octane gasoline, so I used it directly without any worries. 95-octane is more expensive, and it would be a waste if the engine isn't designed for it. I asked the 4S store, and they confirmed that all Yidong Plus models are compatible with 92-octane fuel, so there's no need to overthink it. It's been working perfectly fine with no issues—just make sure not to pick the wrong octane at the pump. Saves money and gives peace of mind.

Was this review help?
20
Share
Expand All
SanAnderson
02/05/2026, 03:01:09 AM

I prioritize daily expenses and environmental protection, and using 92-octane fuel in the Yidong Plus is the most cost-effective. Although 95-octane offers slightly better fuel efficiency, its higher price means that 92-octane saves more on fuel costs in the long run, reducing expenses. It also lowers carbon emissions because standard gasoline production is more eco-friendly. My experience shows that 92-octane fully meets the requirements, making an upgrade unnecessary.

Was this review help?
20
Share
Expand All
Theresa
05/01/2026, 12:05:51 PM

I've been maintaining my Yidong Plus strictly according to the manual, which requires 92-octane gasoline, so I've been consistently using it. While 95-octane might offer a slight performance boost, the engine isn't designed or optimized for it, and long-term use could slightly increase the risk of carbon buildup. I recommend regularly refueling to keep the tank clean and avoiding mixing different octane ratings. It's both cost-effective and good for the car's health.

Was this review help?
9
Share
Expand All
More Q&A

Why Can't I Always Shift into Reverse Gear When Practicing Driving?

Here are the reasons why you can't always shift into reverse gear when practicing driving: 1. Not fully engaged in gear: The gear is not fully engaged and remains in neutral; reverse gear generally doesn't have a synchronizer. Although most gear shifts can be meshed through the gear's cutting angle, there are times when two gears clash and can't engage. In this case, simply lift the clutch slightly to let the input shaft rotate and realign the gears. 2. Handbrake not released: The handbrake is not released, and the car remains in manual braking mode, so it won't move. 3. Clutch not released: The clutch is not released and remains disengaged, so no power is being transmitted. 4. Transmission: The synchronizer in the transmission is stuck, or there are other issues. In this case, professional repair is needed.
116
Share

How to Solve Chain Noise Issues?

Here are the solutions for chain noise issues: 1. Mechanical components: The main causes of timing chain noise usually include lack of tension in the chain tensioner, stretched timing chain, abnormal wear of the guide chain plate, or abnormal timing sprocket. This involves replacing the faulty mechanical components—whichever part is damaged should be replaced. 2. Lubrication system failure: To prevent excessive chain wear and increased clearance, the system is equipped with an automatic chain tensioner. This tensioner operates based on oil pressure. When the lubrication system malfunctions, abnormal oil pressure can lead to excessive chain clearance and noise. Prompt inspection and repair are necessary to prevent excessive clearance and potential engine damage due to chain skipping. 3. Low oil pressure: Noise caused by low oil pressure is usually more noticeable at idle and reduces when accelerating.
104
Share

Is a Tire Produced Half a Year Ago Considered New?

Tires produced half a year ago are considered new. Below is an introduction about tires: 1. Introduction: Although tires are rubber products with a certain "shelf life," unlike food, they do not have an expiration date marked. In fact, it is difficult to determine the "shelf life" of tires because their lifespan is highly dependent on usage conditions, such as climate, parking environment, driving conditions, and the driver's habits, all of which can affect the tire's service life. 2. Tire Pressure: Besides the production date, tire pressure is also crucial for the tire's lifespan. Therefore, it is important to regularly check the tire pressure during daily use. The manufacturer's recommended tire pressure value can usually be found on the door frame. Improper tire pressure can accelerate tire wear and shorten the tire's service life.
111
Share

How to Identify the Authenticity of LLumar Car Window Film?

Here are the methods to identify the authenticity of LLumar car window film: 1. Clarity: Although car window films come in various colors, high-quality films allow clear visibility of objects beyond 6 meters at night. In contrast, inferior films produce a hazy effect. 2. Touch: High-quality films feel thick and smooth, whereas inferior ones lack sufficient toughness, being thin, brittle, and prone to wrinkling. 3. Odor: High-quality films have almost no unpleasant smell. However, inferior films contain high levels of benzene in the residual solvents of the adhesive layer, emitting a pungent odor that can be highly harmful to passengers. 4. Color: Some car films are darker in color. You can scratch the film with a fingernail or a sharp object. If the color comes off, it is likely a fake film. Genuine high-quality films are scratch-resistant and do not fade easily.
101
Share

What Causes Jerking in CVT Transmissions?

Here are the reasons for jerking in CVT transmissions: 1. Insufficient Lubrication: A common cause of jerking in CVT transmissions is gear-shift jerking during cold starts. Since most mainstream CVT transmissions require fluid, insufficient lubrication during cold starts can lead to poor chain connections. When the clutch engages during a cold start, it is prone to impact, causing gear-shift jerking. This issue can be avoided by warming up the car and ensuring the brake is firmly pressed during gear shifts to allow smooth clutch engagement. 2. Design and Quality Issues: Design and quality problems can also frequently cause shaking in CVT transmissions. A typical example involves a certain Japanese brand. The CVT failures in this brand are mainly due to poor torque converter design (connecting the transmission body to the engine), leading to gear-shift impacts that can occur at any speed. Additionally, subpar quality, excessive chain wear beyond normal levels, and a large amount of metal shavings accumulating in the oil pan can also cause shaking in CVT transmissions, though severe jerking is unlikely.
119
Share

What is the arrangement basis for Lu A and Lu B license plates?

A represents the provincial capital, while B and subsequent letters are determined based on the city's GDP. Below is an introduction to license plate numbers: 1. Overview: A license plate number is an identifier for a vehicle, similar to how an ID number identifies a person. For example, a license plate from Guangzhou City, Guangdong Province would have 'Yue' representing Guangdong Province and 'A' representing Guangzhou City, making 'Yue A' the license plate code for Guangzhou. 2. Motor Vehicle Registration Authority Code: The motor vehicle registration authority code consists of 2 characters, combining a Chinese character and an English letter. The Chinese character is the abbreviation of the province, autonomous region, or municipality directly under the central government, and the English letter is the code of the vehicle management office. 'Lu' is the Chinese character abbreviation for Shandong Province, 'A' is the code for the Jinan City Vehicle Management Office, and other letters follow this pattern.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.