Should the car's heating system use internal or external air circulation?

1 Answers
DelHarley
07/30/25 5:18am
When using the car's heating system, it is advisable to alternate between internal and external air circulation depending on the situation. Introduction to internal and external air circulation in cars: Internal air circulation in a car refers to the recirculation of air within the cabin. In this mode, the airflow passage between the inside and outside of the vehicle is closed. Without the fan running, there is no airflow circulation. When the fan is on, the air drawn in comes solely from inside the vehicle, creating an internal airflow cycle. External air circulation mode uses the fan to draw air from outside the vehicle into the cabin, allowing air to flow between the exterior and interior. The air blown by the fan comes from outside, and while driving, fresh air is continuously drawn into the cabin, replenishing the interior with fresh air. Whether to use internal or external air circulation when using the car's heating system depends on the situation: When driving in congested urban areas, it is recommended to use internal air circulation with the heating system. On highways or during long-distance driving, using external air circulation with the heating system helps replenish fresh air inside the cabin, which is beneficial for the health of the passengers.
Was this review help?
2
0
Share
More Forum Discussions

What does RVM mean when it appears on the Little Ant?

The appearance of RVM on the Little Ant is caused by an issue with the vehicle's TBOX, which is the remote communication module of the vehicle. Below is a detailed analysis of this issue: Vehicle Data Exhaustion: When encountering such a problem, the first step is to check whether the vehicle's data plan has expired or the data has been exhausted. Most manufacturers provide a certain period of free data for the vehicle, and after this period, it may result in no signal. Vehicle Module Malfunction: If all conditions are normal but the warning light remains on, it could be due to a failed module upgrade or a malfunction during usage. In this case, it is necessary to visit a service station to attempt a firmware update or replace the TBOX module to resolve the issue.
10
2
Share

What is the normal fuel pump pressure value for the BYD F3?

BYD F3 fuel pump normal pressure value is 2.5. The functions and classifications of the fuel pump are as follows: Functions: To draw gasoline from the fuel tank and deliver it through the pipeline and fuel filter to the float chamber of the carburetor. Classification: Fuel pumps can be divided into two types according to the driving method: mechanically driven diaphragm type and electrically driven type. The diaphragm fuel pump is a representative of the mechanical fuel pump, used in carburetor engines. The diaphragm fuel pump is characterized by its simple structure and the durability of the rubber diaphragm material to heat and fuel. The electric fuel pump does not rely on the camshaft to drive but uses electromagnetic force to repeatedly move the pump diaphragm.
9
3
Share

What to Do When the Car Navigation Does Not Display the Rearview Camera Image?

Solutions for when the car navigation does not display the rearview camera image: 1. Check the wiring: If the rearview camera screen is black, it may be due to poor wiring connections. It is necessary to promptly inspect the wiring and the connection points with the vehicle's installation to see if there are any loose connections. 2. Wiring aging: If the video power cable has aged, try replacing it with a new one. 3. Check the chip: If the rearview camera screen is black and not displaying, it may be due to prolonged use of the rearview camera, causing poor chip light sensitivity or even a snowy screen. In cases of chip malfunction or design defects, it is necessary to visit a repair shop for inspection, repair, or direct replacement.
4
3
Share

Is it necessary to remove a business card that has fallen into the car window?

It is not necessary to remove it as long as it does not cause any malfunctions. Here is some relevant information: 1. Noise generation: The business card may rub against the car door and produce noise, but for the vehicle, the noise generated by the card is almost negligible. 2. Jamming the window lifting mechanism: This issue is also unlikely to occur because business cards are relatively thin and usually fall directly to the bottom of the door panel, thus having minimal impact on the window lifting mechanism. 3. Inspection: Before driving, if you notice a small card on the window, be sure to remove it first. If you are not careful, the card may be pulled into the car door when the window is rolled down.
4
4
Share

What functions are available in driving scenarios?

Introduction to driving scenario functions: 1. Voice navigation: When driving mode is activated, the phone enters a listening state. Simply say 'Navigate to + destination name' and the phone will automatically plan the optimal route. 2. Voice calling: Answering or making calls while driving can be distracting and lead to accidents. In driving mode, simply say 'Call someone' and the call will be automatically made. 3. Voice music playback: Driving can be boring. Just say 'Play XX music' and the phone will automatically play the music. 4. Voice message playback: When it's inconvenient to check messages while driving, simply say 'Read the text message' or 'Read the WeChat message'.
4
2
Share

What are the techniques for driving up a slope in an underground garage?

When driving in an underground garage, you should turn on the headlights and drive slowly. When going uphill, apply the throttle as needed. If it's a manual transmission vehicle, try to use a lower gear. Below are some tips for driving up a slope in an underground garage: 1. Manual transmission: Press the brake, engage the clutch, and start the engine. Shift into first gear and slowly release the clutch. When the vehicle starts to vibrate slightly, release the brake and immediately press the throttle to add fuel. Release the clutch as the vehicle moves forward to complete the starting process. 2. Automatic transmission: Most automatic transmission vehicles come with a hill-start assist function. This function maintains the brakes for a short period when the accelerator pedal is pressed deeply to prevent the vehicle from rolling back. At this point, pressing the throttle will complete the starting process.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.