Should the car go straight when the steering wheel is released?

What Causes the Left Side to Be Wider Than the Right Side When Reversing into a Parking Space?

Turning the steering wheel too early during right-side reverse parking will cause the wheels to be too close to the corner of the parking space, resulting in a wider left side and narrower right side. Additional Information: Evaluation Criteria: Not following the designated route or sequence will result in failure; the vehicle body touching the lines or failing to park properly will result in failure; exceeding 210 seconds to complete reverse parking will result in failure; stopping midway will deduct 5 points each time. Common Reverse Parking Methods: There are three most common types of reverse parking. The first is "non"-shaped reverse parking, commonly seen in large shopping malls. The second is roadside "one"-shaped reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking.

14

4

Share

How Many Years Until a Car is Scrapped?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. In addition to the above vehicles, small and micro non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal should fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix their seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice" if they do. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner should submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if a vehicle cannot be driven back to its registered location due to damage, the owner can deliver the scrapped vehicle to a local recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased vehicle. The application must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation; (2) The owner must have owned the original vehicle for more than three years.

1

Share

Which Exam Does the Road Driving Skills Test Belong To?

Road driving skills test is part of Exam 2 and Exam 3. The road driving skills test is divided into two parts: on-site road driving assessment and actual road driving assessment. Among them, the on-site road driving assessment belongs to Exam 2, while the actual road driving assessment is part of Exam 3. Below is a detailed introduction: The on-site road driving assessment includes: driving over a single-plank bridge, starting on a slope, passing through continuous obstacles, curve driving, right-angle turns, parallel parking, speed-limited passage through a narrow gate, driving on undulating roads, and driving on low-friction coefficient roads. The actual road driving assessment includes: preparation before starting, starting, passing through intersections, obeying traffic signals, driving according to road signs and markings, changing lanes, meeting oncoming vehicles, overtaking, and designated parking, among others. The road driving skills test section should include curves, slopes, intersections, traffic signals, signs, and markings, among other traffic facilities.

8

2

Share

Which Way to Turn the Steering Wheel When the Parking Space is Narrow on One Side?

When reversing into a parking space, if the left side is wider and the right side is narrower, turn the steering wheel to the left to correct. Conversely, if the left side is narrower and the right side is wider, turn the steering wheel to the right to correct. In short, always turn the steering wheel toward the wider side to adjust. There are three most common types of reverse parking. The first is the "non"-shaped reverse parking, commonly seen in large shopping malls. The second is the "line"-shaped roadside reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking. 70% of driving students find parallel parking more challenging. "Non"-shaped reverse parking: In this method, the vehicle should be perpendicular to the target parking space. Using the B-pillar of your car as a reference point and the first parking space as a marker, you can generally reverse into the third parking space. This positioning method is more suitable for novice drivers. The advantage is that, if mastered well, it allows for a one-time entry. The downside is that it is somewhat rigid; if there are many vehicles on both sides or the space is narrow, multiple adjustments may be needed. Most driving students report that this type of reverse parking is common and relatively easy to learn. "Line"-shaped parallel parking: In this method, use the car in front as a reference, align your vehicle, and turn the steering wheel to the right. When the angle between the two cars reaches 45 degrees, observe and turn the steering wheel back while reversing. If estimated correctly, you can complete the parking in one go. This method often requires occupying the lane, so many driving students, who might otherwise perform well, lose their rhythm when the car behind honks, leading to failure. Diagonal parking: These two types of reverse parking generally require one to two lessons for driving students to master proficiently. Of course, there are also diagonal or irregular parking scenarios, which won’t be detailed here. These will be covered one by one in driving lessons for students to practice.

18

2

Share

Is it better to turn the steering wheel fully early or late when reversing into a parking space?

Reversing into a parking space earlier is better when turning the steering wheel fully. Because if you turn it early and encounter a problem that prevents entry, there is still a chance to make adjustments, whereas turning it late makes it difficult to correct. Additionally, stopping is not allowed during the reversing process. Below are relevant details: Four situations that result in failing the reversing test: the vehicle body crossing the line; not following the prescribed route or sequence; failing to enter the parking space; stopping midway. Reversing technique: When starting to reverse, turn the steering wheel one and a half turns to the right, keeping the wheels about 40CM away from the right line of the parking space. When you see the left line of the parking space, immediately turn the steering wheel half a turn to the left and continue reversing. Pay attention to both sides of the vehicle body. When the solid lines of the parking space appear and the distance on both sides is roughly equal, immediately turn the steering wheel one full turn to the left to straighten the vehicle body, then continue reversing. When reversing until the front line of the parking space is completely covered, brake immediately.

10

3

Share

What do road traffic ground markings mean?

Ground traffic markings refer to signs with yellow backgrounds and white text laid on the road surface, primarily installed at both ends of one-way streets. The permitted direction is marked with 'One Way' and a large forward-pointing arrow; the prohibited direction displays 'No Motor Vehicles' along with a prominent no-entry symbol. This is an upgraded version of one-way traffic signs, designed to enhance road micro-circulation in narrow alleys and improve traffic capacity. Road traffic markings can be categorized into three functional types: Guide markings, indicating traffic lanes, driving directions, road edges, sidewalks, and other facilities; Prohibitive markings, announcing special regulations that must be obeyed, prohibiting or restricting road traffic, requiring strict compliance from drivers and pedestrians; Warning markings, alerting drivers and pedestrians to special road conditions, prompting vigilance and preparation for preventive or emergency measures. White dashed lines, when painted on road sections, separate same-direction traffic flows or serve as safe driving distance indicators; at intersections, they guide vehicle movement. White solid lines, on road sections, divide same-direction motorized and non-motorized traffic or mark lane edges; at intersections, they function as guide lane lines or stop lines. Yellow dashed lines separate opposing traffic flows when painted on road sections; when marked along curbs or kerbs, they prohibit long-term roadside parking. Yellow solid lines, on road sections, divide opposing traffic flows; when applied to curbs or kerbs, they forbid both long-term and temporary roadside parking.

11

1

Share

Should the car go straight when the steering wheel is released?

What Causes the Left Side to Be Wider Than the Right Side When Reversing into a Parking Space?

How Many Years Until a Car is Scrapped?

Which Exam Does the Road Driving Skills Test Belong To?

Which Way to Turn the Steering Wheel When the Parking Space is Narrow on One Side?

Is it better to turn the steering wheel fully early or late when reversing into a parking space?

What do road traffic ground markings mean?

Does sweeping the line with the rearview mirror during reverse parking count as crossing?

How to Identify the Reference Points for Reverse Parking?

What does it mean to hit the corner when reversing into the garage?

How many points are deducted for touching the line during reverse parking?