···
Log in / Register

Should the car be turned off when refueling?

6Answers
OKate
07/24/2025, 02:52:22 PM

When refueling a car, it is necessary to turn off the engine to prevent the risk of ignition or explosion. Gasoline is a flammable substance with a certain degree of volatility. 1. Characteristics of gasoline: The degree of evaporation of gasoline in the carburetor has a significant impact on the engine's fuel consumption, startup, and acceleration. Gasoline possesses properties such as volatility, anti-knock performance, safety, and corrosiveness. The higher the octane number of gasoline, the better its anti-knock performance. Under natural conditions, gasoline can remain stable for a long time, but during transportation, it can easily corrode storage tanks, carburetors, cylinders, and other equipment. Currently, the gasoline used in China is produced and sold according to its grade. 2. Function of gasoline: Gasoline is primarily used as fuel for spark-ignition internal combustion engines and is the most widely used light petroleum product in the world.

Was this review help?
113
Share
CooperDella
08/10/2025, 04:46:59 AM

I've been driving for quite some years, and I often see gas stations explicitly requiring engines to be turned off while refueling, which is to prevent fire hazards. Just imagine, if the engine is still running, the exhaust sparks from the car could ignite gasoline vapors, and even static electricity could cause accidents. I've personally seen news reports of accidents caused by not turning off the engine, with consequences ranging from vehicle damage to severe injuries. Forming the habit is simple: stop the car, turn off the engine, shift to P gear, and only start the car after refueling. This isn't making a fuss over nothing but taking responsibility for yourself and others. I also remind my family and friends to follow the rules in daily life—saving those few seconds isn't worth the risk. Remember, safety comes first; don't let convenience harm you.

Was this review help?
20
Share
Expand All
MacAxel
09/25/2025, 11:33:40 PM

As a seasoned driver, I've refueled countless times and concluded one thing: no matter what car you drive, you must turn off the engine to refuel. Why? When the engine is running, hot exhaust can ignite gasoline vapors, and if an accident happens, it could lead to a major fire. I've tried sneaking in a refuel without turning off the engine once or twice—nothing happened, but I felt guilty and would back down the moment a gas station employee gave me a stern look. Nowadays, regulations are even stricter, with warning signs posted in many places, and violations could result in warnings or fines. Don’t think this is an unnecessary step; developing the habit of turning off the engine can also save some fuel, as the engine load decreases, making it more economical. In short, following the rules is always the right move.

Was this review help?
5
Share
Expand All
Henry
11/09/2025, 12:37:14 AM

I know a bit about car mechanics, let me explain why you should turn off the engine when refueling. The running engine generates heat and gases, which can easily ignite when coming into contact with gasoline vapors. If you refuel without turning off the engine and fuel splashes onto hot components, it could cause instant combustion. This is basic knowledge, but I often see young people ignoring it, thinking it won't happen to them. However, the risks are significant, especially in dry weather when static electricity is more prevalent. My advice is to always park, shift into gear, turn off the engine, and then open the fuel tank cap. Refuel safely and leave promptly. This habit takes little time but can prevent major trouble.

Was this review help?
6
Share
Expand All
SanKeira
12/30/2025, 02:22:24 AM

Think about it, what are the benefits of not turning off the engine while refueling? Almost all are disadvantages: high risk, increased fuel consumption, and the possibility of getting a ticket. I've observed that gas station attendants always emphasize the need to turn off the engine—it's part of their work protocol. Don't underestimate this action; it prevents engine heat from igniting gasoline, protecting both you and your beloved car. Some people cut corners by not turning off the engine, but after one warning, they usually comply. Developing good habits starts with the details. Turning off the engine while refueling isn't just about safety; it also reflects a sense of public morality.

Was this review help?
18
Share
Expand All
SanAbigail
03/27/2026, 04:29:13 AM

As a car owner, I insist on turning off the engine when refueling. There's science behind this: a running car generates spark sources that can ignite gasoline upon contact. I recall reading popular science articles stating that the accident rate doubles when refueling without turning off the engine. In reality, I've witnessed others being stopped by staff for this practice, creating awkward situations. Following this rule also helps reduce pollution emissions and noise, benefiting the environment. I often share with fellow car enthusiasts that safety measures shouldn't be taken lightly - turning off the engine for refueling is really no trouble at all.

Was this review help?
6
Share
Expand All
More Q&A

What Taxes Are There on Imported Cars?

Imported cars are subject to the following taxes: customs duty, value-added tax, and consumption tax. Below are the relevant details: 1. Tax rate = basic customs duty (25%) + consumption tax (10%-40%) + value-added tax (17%) + others (mainly depends on displacement), totaling approximately 120%. The customs duty mainly depends on the displacement of the imported car; different displacements and brands result in different customs duties. 2. Vehicle displacement and consumption tax: 1% for displacements up to 1.0L (inclusive); 3% for displacements above 1.0L up to 1.5L (inclusive); 5% for displacements above 1.5L up to 2.0L (inclusive); 9% for displacements above 2.0L up to 2.5L (inclusive); 12% for displacements above 2.5L up to 3.0L (inclusive); 25% for displacements above 3.0L up to 4.0L (inclusive); 40% for displacements above 4.0L.
114
Share

What do the gear letters on an automatic transmission car represent?

Automatic transmission gear letters represent the following: 1. P stands for Park, used when the car is parked and not in use. In this position, the wheels are mechanically locked to prevent rolling. 2. R stands for Reverse, used when backing up. 3. N stands for Neutral, used for temporary stops (such as at a red light). To prevent the vehicle from rolling on a slope, the brake must be applied. 4. D stands for Drive, also known as the driving gear, used when moving forward. 5. L stands for Low gear, used when going downhill or on long descents. This limits the car to the lowest gear, allowing the engine to assist in braking, reducing the need for prolonged brake use and preventing brake overheating. 6. S stands for Sport mode. When engaged, gears can be freely switched, but the shift timing is delayed to keep the engine at higher RPMs for increased power. This mode significantly increases fuel consumption.
117
Share

Where is the terminal device number of the car?

The terminal device number of a car can usually be found on the vehicle's driving license, which corresponds to the last six digits of the vehicle identification number (VIN). The VIN, also known as the vehicle identification code, is an alphanumeric sequence typically consisting of 17 characters. Currently, there are two main standards for vehicle identification numbers: the EU's ISO 3799 standard and the North American standard, with the latter being more stringent and compatible. Under the North American VIN standard, the specific meanings of the digits are as follows: 1. Digits 1 to 3 represent the manufacturer, brand, and type. 2. Digits 4 to 8 indicate vehicle characteristics, including vehicle type, chassis, engine model, rated weight, and other details. 3. The 9th digit is a check digit. 4. The 10th digit represents the vehicle's production year. 5. The 11th digit indicates the assembly plant where the vehicle was produced. 6. The last six digits are the vehicle's production serial number.
111
Share

How Deep of Scratches Can Polishing Remove?

Car polishing can remove scratches. For issues like oxidized, dull, or lackluster car paint, as well as scratches on the body, car polishing can effectively address these problems, making the paint surface smoother and shinier. Additionally, car polishing can clean the body, effectively removing dirt and corrosive substances, thereby restoring the cleanliness of the paint surface. Polishing the car body before waxing or sealant application can enhance the results and prolong the duration of the effects. The main functions of car waxing are: 1. Waterproofing and protecting against acid rain. Car waxing provides a certain level of protection for the car's paint surface and also reduces the amount of water droplets adhering to the body, with very noticeable effects; 2. Another function is to prevent damage from high temperatures and strong UV radiation, as temperatures rise with changing weather conditions; 3. During driving, high temperatures can cause the car's paint to age. At this point, waxing serves to reflect light, slowing down the aging process of the paint.
116
Share

What does the inspection validity period mean?

The inspection validity period refers to the valid period of the driver's license inspection. The inspection validity period on the driver's license indicates the valid duration for which the license can be used. For a first-time issued driver's license, the validity period is 6 years. For example, if the initial date of the driver's license is December 5, 2012, with a validity period of 6 years, the license will expire on December 5, 2018. Below are the required documents for driver's license inspection: 1. Identification: Resident ID card (a temporary residence permit is also required for those holding ID cards from other provinces or cities) and a copy. 2. Original driver's license: The original motor vehicle driver's license and the currently held driver's license. 3. Photos: Three recent 1-inch color photos with a white background. 4. Medical report: A qualified medical examination report from a district or county-level hospital or above. Such hospitals usually have medical examination points near the vehicle management office or traffic police station. 5. Application form: The applicant should obtain the "Motor Vehicle Driver's License Application Form" from the vehicle management office and fill it out according to the instructions.
104
Share

Can You Turn Left on a Straight Green Light?

Whether you can turn left on a straight green light depends on the situation. Situations where turning is allowed: At an intersection with standard three-color traffic lights, you can turn left on a green light, but you must yield to oncoming straight-moving vehicles. Situations where turning is not allowed: When encountering lane-specific arrow signals, if the straight arrow is green but the left-turn arrow is red, you cannot turn left, but you may enter the left-turn waiting area. Vehicles in the left-turn lane can proceed when the left arrow turns green. Relevant regulations are as follows: Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" (State Council Order No. 405) states: For motor vehicle and non-motor vehicle signal lights, when the yellow light is on, vehicles that have already crossed the stop line may continue to proceed; when the green light is on, vehicles are permitted to proceed, but turning vehicles must not impede the passage of straight-moving vehicles or pedestrians. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crosswalk signals, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may proceed if they do not impede the passage of other vehicles or pedestrians.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.