Should the car be parked in the garage or outside during heavy rain?

What are the requirements for applying for a C1 driver's license?

C1 driver's license has a minimum age requirement of 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. The C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles, as well as light, small, and mini special purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people. The examination consists of four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. Passing standards for the exams: Traffic regulations and related knowledge (Subject 1) – Written test, scored out of 100, with 90 or above required to pass. Field driving (Subject 2) – Conducted in a designated area with an actual vehicle. The minimum passing score is 80, and scores below 80 are failing. Road driving (Subject 3) – Conducted on roads or simulated areas with an actual vehicle. Scored out of 100, with 90 or above required to pass. Safe and civilized driving knowledge – Written test, featuring questions in the form of case studies, images, animations, etc. The test includes true/false, single-choice, and multiple-choice questions, totaling 50 questions. Scored out of 100, with 90 or above required to pass.

20

5

Share

Why Must You Downshift to First Gear Every Time You Park?

The reasons for downshifting to first gear every time you park are as follows: 1. Normally, vehicles start in first gear because it provides the highest torque, which is ideal for moving a stationary car. However, in special road conditions like icy, snowy, or muddy surfaces, second gear can be used to start, as the lower torque prevents excessive wheel spin that could cause the wheels to sink deeper. Starting in second gear, which has relatively lower torque, is suitable when the car doesn't require or shouldn't use too much torque to move from a standstill. Generally, starting in first gear is faster than in second gear because the engine revs up more easily in a lower gear, resulting in better acceleration. This is the principle behind "downshifting to overtake." When starting in second gear, to avoid stalling, the clutch must be released slowly, and the engine takes longer to reach its optimal operating range. By the time this happens, a skilled driver could have already shifted to third gear. The time taken for a second-gear start covers the shifting time for first, second, and third gears, making it slower than a first-gear start and potentially causing unnecessary wear to the vehicle. 2. To save fuel, most small cars have their idle speed set relatively low. In such cases, starting in second gear results in insufficient torque. Even with perfect clutch and throttle coordination, some car models may start very slowly with poor acceleration and are prone to stalling. Some low-power vehicles may stall immediately when attempting a second-gear start. Forcing a second-gear start also places a high load on the engine at low RPMs, and the second-gear transmission components endure torque loads beyond their design specifications. Prolonged use of second-gear starts can negatively impact the transmission's lifespan, lead to engine carbon buildup, and, if continued over time, may cause engine failure within a few years.

5

3

Share

Does Polishing Damage the Paint?

Car polishing does not harm the vehicle; on the contrary, it can better protect the paint. Advantages of car polishing: It can remove stains and scratches from the car surface and also provides some protection to the paint. After polishing, the car's paint can be restored to its original condition through mirror finishing, and it can also remove oxides and corrosive substances attached to the car body. Precautions for polishing: Clean the area to be polished thoroughly, use clay bars to remove asphalt and hard contaminants from the paint surface. If there are plastic parts around the scratches on the paint surface, protect them with masking tape to prevent the plastic from being rubbed during polishing.

7

2

Share

Will Engine Wiring Protection Agent Cause Corrosion?

Engine wiring protection agent will not cause corrosion, and reputable brands of protection agents come with warranties. Functions of wiring protection agent: Engine wiring protection agent is effective as it helps prevent wiring aging and avoids vehicle short-circuiting or spontaneous combustion caused by wiring issues; it can effectively repair minor cracks on the wiring, prevent electrical leakage, and ensure the efficiency of the vehicle's electrical circuit. Precautions for using wiring protection agent: Using engine wiring protection agent does not require much technical expertise. When applying the engine wiring protection agent, be sure to turn off the ignition switch and spray the agent onto the battery cables, ignition coils, engine electrical wiring harness, etc.

5

4

Share

How to Turn on the Air Conditioning in a Haval H2?

Press the A/C button, and the air recirculation inside the car will automatically activate. A/C is the abbreviation for air-conditioning, which stands for air control or air conditioning, achieving cooling or heating purposes through different operation modes of the air conditioning compressor. Below are some precautions for using car air conditioning: 1. Be cautious with air conditioning modifications: Modifying the car's air conditioning system is not recommended, as arbitrary modifications can affect the vehicle's performance. 2. Avoid setting the air conditioning temperature too low: Selecting an appropriate air conditioning temperature is the primary step in air conditioning maintenance. 3. Adjust the air vent direction: The principle for car air conditioning vents: When cooling, direct the vents upward; when heating, direct them downward.

16

2

Share

What needs to be replaced when water enters the engine?

When water enters the engine, important components such as pistons, connecting rods, and valves need to be replaced. Engine function: It is the machine that provides power to the car. A car engine is essentially an energy conversion mechanism that transforms the thermal energy from gasoline, diesel, or natural gas into mechanical energy by burning the gas in a sealed cylinder to expand it and push the pistons to perform work. Engine introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy.

18

5

Share

Should the car be parked in the garage or outside during heavy rain?

What are the requirements for applying for a C1 driver's license?

Why Must You Downshift to First Gear Every Time You Park?

Does Polishing Damage the Paint?

Will Engine Wiring Protection Agent Cause Corrosion?

How to Turn on the Air Conditioning in a Haval H2?

What needs to be replaced when water enters the engine?

What is the application process for the Zhejiang A license plate lottery?

What are the rules for reducing penalty points through traffic law study?

Does 'S' indicate provincial highways?

How to align the timing chain on Hyundai ix35?