Should the car be in the started state during charging?

What to Do If the Car Stalls a Few Seconds After Starting?

Solutions for a car stalling a few seconds after starting include: 1. Use specialized carbon cleaner to remove carbon deposits from the throttle body, spark plugs, cylinders, fuel lines, intake manifold, etc.; 2. Replace the spark plugs. Reasons for a car stalling a few seconds after starting include: 1. Carbon deposits causing stalling: Carbon buildup in the throttle body, spark plugs, etc.; 2. Poor fuel quality and clogged fuel injectors: Using low-quality fuel not only increases carbon deposits but may also clog the fuel injectors; 3. Ignition system failure: Carbon buildup on spark plugs and insufficient ignition voltage; 4. Power supply failure: If the battery is severely depleted, it can make the engine difficult or impossible to start; 5. Abnormal engine control system.

16

5

Share

What is the reason for the automatic locking of JAC Tongyue?

JAC Tongyue automatic locking reasons: Most of them are due to the problem of the central lock switch being broken or the central lock malfunction. The following are related information about JAC Tongyue: 1. The main door central lock motor may be misaligned, causing inaccurate signals. Adjusting it can solve the problem, or the door lock mechanism may already be broken, which can also cause this issue. 2. The car model is compact and full, with interior space being more spacious compared to other models in the same class. 3. JAC Tongyue uses 1.3L and 1.5L engines sourced from Mitsubishi, with model numbers 4G13 and 4G15. These engines are known for their high power output and low fuel consumption.

12

0

Share

How to Coordinate the Clutch and Accelerator When Driving

When driving, the coordination method between the clutch and accelerator is as follows: 1. After pressing the clutch pedal and engaging the gear, lift the clutch pedal until the clutch friction plates begin to make contact. At this point, pause briefly, simultaneously apply the accelerator, and wait until the clutch plates are fully engaged before completely releasing the clutch pedal; 2. When shifting gears, whether upshifting or downshifting, the double-clutch shifting method should be used. For downshifting, first press the clutch pedal while releasing the accelerator pedal, then shift the gear lever into neutral, quickly release and press the clutch pedal again, shift the gear lever into the higher gear position, lift the clutch pedal while applying the accelerator, pause slightly when the clutch plates just make contact, and wait until they are fully engaged before completely releasing the clutch pedal.

7

3

Share

How Many Years Can a Dry Clutch Last?

Dry clutches have a service life of approximately 20 years, which is generally comparable to the lifespan of the vehicle itself, provided that the dry clutch receives proper maintenance. Relevant information is as follows: 1. Maintenance: Regular replacement of transmission lubricating oil is essential for maintenance. Additionally, correct usage of the automatic transmission also contributes to transmission upkeep. When shifting gears, ensure the vehicle comes to a complete stop to protect the gears, bearings, and clutch within the transmission. These three components are critical in the transmission and largely determine its service life. 2. Dry Clutch Maintenance Interval: Maintenance should be performed every two years or 60,000 kilometers. Adhering to this schedule ensures optimal service life and extended usage time. Always have the maintenance done at a 4S dealership to guarantee the quality of parts and professional technical service.

5

0

Share

What is the Difference Between Wet Clutch and Dry Clutch?

Here are the differences between dry dual-clutch and wet dual-clutch: 1. Different Cooling Methods: Dry dual-clutch uses air cooling for heat dissipation, relying on wind to drive away heat; Wet dual-clutch is soaked in oil, resulting in higher cooling efficiency. 2. Different Operation Methods: Dry clutch is a manual transmission friction plate clutch with high mechanical transmission efficiency, more complex operation, and higher failure rate; Wet clutch is an automatic transmission oil-immersed friction plate clutch with lower mechanical transmission efficiency, easier operation, and lower failure rate. Additional Information: Dual-clutch transmissions are not suitable for frequent starts, prolonged low-speed driving, or stop-and-go traffic, as they are prone to overheating, leading to failures. Once the vehicle computer issues a warning, it is necessary to stop immediately and cool down the transmission.

14

2

Share

How to Turn Off the Auto Start-Stop Feature on the New Sportage?

The steps to turn off the auto start-stop feature on the New Sportage are as follows: simply press the auto start-stop button (an 'A' key surrounded by a circular arrow) to deactivate it. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and restarts the engine when it's time to move forward again. The New Sportage is a compact SUV under Dongfeng Yueda Kia, with dimensions of 4460mm in length, 1850mm in width, and 1695mm in height, and a wheelbase of 2640mm. It features a MacPherson strut front suspension and a multi-link independent rear suspension, with a front-wheel-drive configuration.

7

4

Share

Should the car be in the started state during charging?

What to Do If the Car Stalls a Few Seconds After Starting?

What is the reason for the automatic locking of JAC Tongyue?

How to Coordinate the Clutch and Accelerator When Driving

How Many Years Can a Dry Clutch Last?

What is the Difference Between Wet Clutch and Dry Clutch?

How to Turn Off the Auto Start-Stop Feature on the New Sportage?

What formats does the Prado USB support?

How many kilometers is 100 yards equal to?

Why does the dash cam battery not hold a charge?

What Causes the Windshield Wiper Slow Mode to Stop Working?