Should the Car Battery Be Replaced If It Runs Out of Power?

1 Answers
HectorLynn
07/30/25 6:46am
If the car battery runs out of power, it does not need to be replaced; simply recharge it in time. Below are the specific classifications of car batteries (also known as storage batteries): 1. Conventional Battery: The plates of a conventional battery are made of lead and lead oxide, with the electrolyte being an aqueous solution of sulfuric acid. Its main advantages are stable voltage and low cost; the disadvantages are low specific energy (i.e., the amount of electrical energy stored per kilogram of the battery), short service life, and frequent daily maintenance. 2. Dry-Charged Battery: Its full name is dry-charged lead-acid battery. Its main feature is that the negative plate has a high capacity for storing electricity. In a completely dry state, it can retain the stored charge for up to two years. When in use, you only need to add the electrolyte and wait for 20-30 minutes before it can be used. 3. Maintenance-Free Battery: Due to its structural advantages, the maintenance-free battery consumes very little electrolyte and basically does not require the addition of distilled water during its service life. It also features resistance to vibration, high temperature, small size, and low self-discharge. Its service life is generally twice that of a conventional battery.
Was this review help?
1
4
Share
More Forum Discussions

How to Determine if the Turbocharger is Faulty?

Methods to determine if the turbocharger is faulty: 1. A faulty turbocharger will produce loud noises; it is recommended to check the turbocharger's valve or the engine. 2. There is no noticeable lack of power when pressing the accelerator. 3. The engine experiences incomplete combustion, resulting in strong exhaust odors. 4. Abnormal exhaust emissions from the vehicle. A turbocharger utilizes the inertial force of the exhaust gases expelled by the engine to drive the turbine in the turbine chamber. The turbine, in turn, drives the coaxial impeller, which compresses and delivers air from the air filter pipe, pressurizing it before it enters the cylinder. The primary function of a turbocharger is to increase the engine's air intake, thereby enhancing the engine's power and torque, making the vehicle more powerful. When a turbocharger is installed on an engine, its power can increase by up to forty percent compared to when it is not equipped with one.
10
3
Share

What type of oil does the Swift use?

The Swift uses 5W30 engine oil. Engine oil serves functions such as cooling, cleaning, sealing, lubrication, and corrosion prevention. Long-term use of engine oil that meets the engine's standards can extend the engine's lifespan. The Swift is a compact car produced by Changan Suzuki. The vehicle's body dimensions are 3765mm in length, 1690mm in width, and 1510mm in height, with a wheelbase of 2390mm. In terms of power, the car is equipped with a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission, delivering a maximum power of 76kW and a maximum torque of 138Nm. The front suspension is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension.
9
4
Share

What kind of engine oil is used for Changan CS55?

Changan CS55 uses 5w40 or 0w40 fully synthetic engine oil, with an oil capacity of approximately 4L. The Changan CS55 is a compact SUV under Changan Automobile, with body dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2650mm. In terms of power, the vehicle is equipped with a 1.5T turbocharged all-aluminum engine, model JL476ZQCD, with a maximum power output of 115kw and a peak torque of 225nm. The transmission system is matched with a 6-speed manual or 6-speed automatic transmission. The body colors are primarily Dynamic Red and Starry Blue.
1
5
Share

Under What Circumstances Does a Vehicle Need a Wheel Alignment?

Circumstances under which a vehicle needs a wheel alignment: 1. When the vehicle has traveled 20,000 kilometers or one year, whichever comes first, a wheel alignment must be performed; 2. If you need to grip the steering wheel tightly to keep the vehicle from veering off course while driving straight on a flat road, a wheel alignment check is necessary; 3. If the vehicle feels unstable or floats during normal driving, similar to when turning or driving on rough roads, it is recommended to check and perform a wheel alignment; 4. If one side of the front or rear tires shows significant wear, a wheel alignment is also needed; 5. After installing new tires or following a collision, steering, or suspension system repair, it is advisable to perform a wheel alignment. Wheel alignment is based on the vehicle's four-wheel parameters and involves adjustments to ensure optimal driving performance and reliability.
3
5
Share

Is the Atz Engine Imported?

The Atz engine is imported from Japan. The Atz is equipped with 2.0 and 2.5 naturally aspirated engines, which incorporate Mazda's Skyactiv Technology. Compared to traditional naturally aspirated engines, the new Atz comes standard with features such as an intelligent idle stop system and brake energy regeneration system. The Atz 2.5L model accelerates from 0 to 100 km/h in just 8.3 seconds. The vehicle is fitted with high-performance MacPherson strut front suspension and multi-link rear suspension, which have been structurally optimized to achieve both weight reduction and increased rigidity. The car measures 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm.
15
1
Share

How to Replace Engine Spark Plugs?

Method for replacing engine spark plugs: 1. Prepare the necessary tools for disassembly, including 10mm, 14mm, and 16mm sockets, a long extension bar, a ratchet wrench, a magnetic pickup tool, and a rag; 2. After the engine has completely cooled down, unplug the ignition coil connector, then use a 10mm socket to remove the mounting bolts. Once the ignition coil is removed, you can see the spark plug in the cylinder; 3. Depending on the size of the spark plug nut, use either a 14mm or 16mm socket with a long extension bar to loosen it by turning counterclockwise. Once loosened, use the magnetic pickup tool to remove the spark plug; 4. After removing the spark plug, if you don't install a new one immediately, reinsert the ignition coil or plug the spark plug hole with a rag to prevent dirt from falling in; 5. Use the magnetic pickup tool to hold the new spark plug and insert it into the hole, then reassemble following the reverse steps mentioned above. The torque for tightening the spark plug should not be too high, approximately 20Nm is sufficient; 6. After replacing all spark plugs, start the engine to check if they are functioning properly.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.