Should the car air conditioner be turned on for cooling in summer?

2 Answers
MacLillian
07/24/25 6:30am
In summer, the car air conditioner should be turned on for cooling by pressing the AC button. The working principle of the car air conditioner is as follows: the compressor compresses the refrigerant into a high-temperature and high-pressure liquid, which then becomes a medium-temperature and low-pressure liquid after dissipating heat through the air conditioner's cooling plate, and finally turns into a low-temperature and low-pressure gas after being throttled by the expansion valve. The car air conditioner, short for the car air conditioning device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to an optimal state. Its functions are: 1. To provide a comfortable riding environment for passengers and reduce travel fatigue; 2. To create good working conditions for the driver and ensure driving safety.
Was this review help?
6
4
Share
MichaelLynn
08/11/25 2:15am
Using air conditioning for cooling in summer is common, especially during heatwaves. As a seasoned driver with decades of experience, I know that turning on the cooling function is a must. When the temperature rises, the interior of the car becomes unbearably hot, making it impossible to drive without cooling—it's not just uncomfortable but also a risk of heatstroke. My usual routine is to roll down the windows for a minute or two to let the heat escape before starting the air conditioning and setting it to around 24 degrees Celsius, which is both comfortable and energy-efficient. Cars with automatic air conditioning make this process effortless with just one button. Remember to clean the filters regularly to prevent odors and blockages; opening windows for ventilation is fine on short trips, but for long journeys in high temperatures, cooling is essential for health and safety. The slight increase in fuel consumption is a minor concern compared to comfort and driving safety. The engine load may be higher, but modern cars are well-designed, so there's no need for excessive worry. In short, using cooling in summer is standard practice for driving.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What are the symptoms of insufficient clutch fluid in a car?

When the clutch fluid is insufficient, it affects the depression of the clutch pedal, preventing the clutch disc from fully disengaging. Here is an introduction to the effects of insufficient clutch fluid: 1. If the clutch fluid is insufficient, the clutch may not completely disengage even when the clutch pedal is fully depressed, leading to difficulty in shifting gears or even the inability to shift. Additionally, it can accelerate the wear of the clutch disc. 2. Over time, the clutch disc will naturally wear out, but poor usage habits can speed up this process. 3. Insufficient clutch fluid can result in poor mechanical operation, sluggish or soft clutch response, or even complete failure. You may also experience abnormal sensations when pressing the clutch pedal.
9
2
Share

How to Distinguish Between China 4 and China 5 Standards?

China 4 and China 5 vehicle distinctions are as follows: 1. For vehicles that have already obtained the environmental protection inspection compliance label, the emission standard can be checked on the original or duplicate of the label. Alternatively, you can log in to the Motor Vehicle Environmental Protection Website and enter the vehicle model and engine model in the new vehicle compliance query system. 2. According to the national plan, the China 6 emission standard is scheduled to be implemented on July 1, 2020, only three years after the full implementation of the China 5 standard. In key regions such as Beijing-Tianjin-Hebei and surrounding areas, the Yangtze River Delta region, the Fenwei Plain, the Pearl River Delta, and the Chengdu-Chongqing region, the China 6 emission standard will be implemented ahead of schedule. 3. Compared to the current China 5 standard, the China 6 standard raises the threshold by nearly 50%, and it is slightly higher than the current international strictest emission limit—the Euro 6 standard. Once the China 6 standard is officially implemented, it will become the strictest motor vehicle emission standard in the world.
1
4
Share

Can I Get the License Plate on the Same Day of Registration?

Generally speaking, you can get the official license plate on the same day of registering a new car. However, it usually takes three to five working days to receive the plate. The license plate, commonly known as the vehicle plate, refers to the vehicle registration number. Additional information: After selecting the license plate number for a new car and paying the fees, you will need to wait to receive the plate, which typically takes three to five working days. The process for registering a new car includes: 1. Submitting the prepared documents to the 'Pre-registration Counter' in the inspection area of the vehicle management office, where staff will review the documents. If approved, the staff will issue an acceptance form and inspect the new car using a PDA inspection device. Once the vehicle passes inspection, the staff will print the 'Motor Vehicle Inspection Record' at the pre-registration counter. 2. Organizing the documents from the pre-registration counter and proceeding to the 'Registration Counter' to submit the relevant materials. Staff at the registration counter will process the registration. After receiving the 'Inspection Certificate,' you can proceed to select a license plate number. 3. After successfully selecting a number, proceed to the 'Certificate Production Counter' for document production. Once the documents are completed, fill in the delivery address, and you can wait for the license plate to arrive.
18
4
Share

What is the battery model for the Nissan X-Trail car key?

The battery model for the Nissan X-Trail car key is CR2032. CR2032 is a lithium manganese dioxide battery, named according to the IEC standard. The breakdown is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates the battery shape is cylindrical; if it were square, F would be used instead. 20 - Indicates the battery diameter is 20mm. 32 - Represents the battery height of 3.2mm. The nominal voltage is 3.0V, with an endpoint voltage of 2.0V. The rated capacity varies between 200-240mAh, depending on the manufacturer's quality. The typical shelf life of a CR2032 battery is 5 years. If the manufacturing or quality control is poor, its lifespan can be significantly reduced. Domestic top-tier brands generally ensure this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can extend to 8 years or even 10 years. For Nissan X-Trail models such as the Fashion Edition, Comfort Edition, and Luxury Edition, the key battery model is CR2032. Replacing the key battery involves just three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to release the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it open gently to reveal the coin battery. Lightly press to remove the battery. Step 3: Replace the battery. Insert the new battery, reattach the battery cover, and reinsert the mechanical key to complete the replacement. Two important notes when replacing the Nissan X-Trail car key battery: The key uses a CR2032 coin battery—ensure you purchase the correct model. Replace the battery quickly, as the key has a memory function. If power is lost for more than 5 minutes, the key will need to be reprogrammed.
15
5
Share

Where is the Lu W license plate from?

Previously, the Lu W license plates were issued to staff members of provincial-level government agencies in Jinan. Around the end of 2016, the issuance of Lu W license plates was discontinued. Currently, all such plates have been canceled and replaced with Lu A plates. According to relevant laws and regulations, starting from October 2018, Shandong Province completely abolished the "Lu O" and "Lu W" license plates, with all replacement work completed by December 31. Additional relevant information is as follows: 1. The first character of a license plate is a Chinese character, representing the abbreviation of the province where the vehicle is registered. The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered. Typically, A represents the provincial capital, B represents the second-largest city in the province, and so on. 2. A license plate, also known as a vehicle registration plate, is a plate hung on the front and rear of a vehicle. It is usually made of aluminum, plastic, or sticker material and displays the vehicle's registration number, registration region, or other basic information. License plates serve as unique identifiers for vehicles, allowing authorities to determine the province, city, or county of registration and enabling vehicle management offices to identify the owner. 3. The colors of license plates vary depending on the type of vehicle: blue plates are used for small vehicles, yellow plates for large and medium-sized vehicles, white plates for military vehicles (including police cars), and black plates for foreign-registered vehicles.
8
2
Share

What is the best amount of oil to add to a motorcycle?

For most common domestic motorcycles below 150CC, the oil capacity is generally no more than one liter. It is absolutely essential not to overfill the motorcycle with oil. The correct oil level should be checked using the oil dipstick or oil inspection window. Below is additional information about motorcycle oil: 1. When adding oil to the engine, the oil level should be between the upper and lower limits on the dipstick. If too much oil is added, the oil volume will expand as the engine temperature rises, increasing the pressure in the oil chamber and the running resistance. This can lead to reduced engine power and increased fuel consumption. 2. Overfilling the oil can cause oil to leak through the crankcase vent pipe due to increased crankcase pressure. The oil pressure may also loosen the oil seals, resulting in oil leaks. 3. Excessive oil can affect engine cooling, leading to high engine temperatures, insufficient power, oil leaks, blue smoke from the engine, and issues such as clutch disengagement failure.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.