Should the Captiva use 92 or 95 octane gasoline?

2 Answers
DelDeclan
07/24/25 4:00am
The Chevrolet Captiva can use 92 octane gasoline. Here is the relevant information: Captiva: The Chevrolet Captiva is a vehicle launched by Chevrolet. Model: Compared to the current Captiva, the new model features LED taillights, along with subtle adjustments to the rear bumper and exhaust pipes. According to official sources, the new Captiva also has upgrades in its interior and is equipped with a keyless entry system. The interior is simple and unpretentious, with a bold and masculine style, rich in luxury features, giving it a significant advantage among its peers; the dashboard layout is straightforward, the air conditioning performs well, and the overall ride comfort is good; however, the sound system is average.
Was this review help?
1
3
Share
StCourtney
08/10/25 11:34pm
Over the years driving my Captiva, I've mostly used 92-octane fuel. The manufacturer's manual clearly states that 92-octane or higher is acceptable, and this is also indicated inside the fuel filler cap. The car comes with a naturally aspirated engine that doesn't have an exceptionally high compression ratio, so 92-octane is perfectly adequate and saves money. Once during a long road trip, I encountered a remote gas station that only had 95-octane. Filling up with it didn't make any noticeable difference in power, just hurt my wallet a bit more. While 95-octane has better anti-knock properties, our old buddy here really doesn't need it unless you frequently floor the accelerator uphill or the car is particularly old with some carbon buildup. Calculated over time, sticking with 92-octane saves a significant amount of money—enough for an extra maintenance service.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What are the differences between the BMW X6 and BMW X6M?

The differences between the BMW X6M and X6 are as follows: 1. Different powertrains: The BMW X6M uses a 4.4L twin-turbocharged V8 engine with a maximum horsepower of 560 hp, maximum power of 412 kW, maximum torque of 686 Nm, and a 0-100 km/h acceleration time of just 4.2 seconds; the X6 uses a 2.0T engine with a maximum power of 575 hp at 6000-6500 rpm and a peak torque of 750 Nm at 2200-5000 rpm. 2. Different xDrive all-wheel-drive tuning: The BMW X6M uses a rear-wheel-biased all-wheel-drive tuning; the X6 has a more balanced front-rear tuning. 3. Different tire and braking systems: The BMW X6M has front tire specifications of 285/35R21 and rear tire specifications of 325/30R21; the X6 M has front tire specifications of 275/40R21 and rear tire specifications of 315/35R21.
7
0
Share

What is the vehicle identification number for vehicle real-name authentication?

The vehicle identification number is the VIN code, and its locations are: on the left side of the dashboard; the lower left side of the windshield; on the vehicle nameplate; on the body at the upper part of the right front shock absorber; in the trunk area; on the door hinge pillar, door lock pillar, or one of the door edge pillars that join with the door lock pillar. Composition: The vehicle identification number consists of 17 characters, which include the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. Function: The functions of the VIN code are: to confirm the identity of the vehicle; to check for traffic violations; to query the vehicle's batch; and to accurately locate parts.
11
0
Share

What is the actual fuel consumption of the Rich 6?

The fuel consumption of the Rich 6 is approximately 8 to 9 liters per 100 kilometers. This vehicle is a diesel pickup model, equipped with a 2.5T turbocharged diesel engine. More details are as follows: 1. The 2.5T diesel engine and 2.4L gasoline engine of the Rich 6 pickup are not from Nissan, nor are they joint-venture engines. The Rich 6 engine is domestically produced, manufactured in Mianyang Xinchen. The 2.5T diesel engine model is ZD25T5, with a maximum power of 140 horsepower and a maximum torque of 305 Nm. The vehicle's curb weight is 1900 kg. 2. The transmission system is matched with a 5-speed manual gearbox. The gear lever angle is slightly rearward, which may lead to mistaking neutral for 4th gear when first using it, requiring some adaptation. Since it is produced by Zhengzhou Nissan, many people mistakenly assume its engine is from Nissan.
7
4
Share

How often should a sedan be inspected after six years?

A sedan must undergo annual inspections after six years. The exemption for the first six years means that the vehicle does not need to go through an on-site inspection within this period. Although the hassle of on-site inspection is avoided, the owner must personally visit the vehicle management office every two years to collect the annual inspection sticker. Bring your ID card, vehicle registration certificate, and valid compulsory traffic insurance policy to apply for a new annual inspection sticker. Precautions for vehicle on-site inspection: 1. The license plate must not be damaged; 2. The interior and exterior of the car must be cleaned, and the bumper must not have obvious damage; 3. A valid compulsory traffic insurance policy; 4. Any traffic violation fines must be settled first; 5. No illegal modifications are allowed; 6. Prepare a fire extinguisher and warning triangle.
12
1
Share

Why is urban fuel consumption high?

Because there is heavy traffic and many traffic lights in urban areas, cars have to start and stop frequently, move at slow speeds, and each trip duration is relatively short, which leads to higher fuel consumption by the engine. Additionally, if there is carbon buildup in the engine, it can cause poor fuel flow and increased fuel consumption. If inappropriate fuel is used in a new car, it can also lead to higher fuel consumption. Regular maintenance: If there are issues with the car's spark plugs or high-voltage wires, the ignition circuit may malfunction, and the car's fuel consumption will also increase. Therefore, it is essential to conduct regular inspections and maintenance on all car components to avoid excessive fuel consumption. Precautions: If increased fuel consumption is found to be caused by poor fuel flow or carbon buildup, a fuel system cleaner can be used to clean the throttle body and fuel injectors, which can help reduce fuel consumption. Additionally, check the wear level of the car's tires. If the wear is severe, it can also increase fuel consumption.
14
3
Share

Are all Mazda CX3 imported?

Not all Mazda CX3 models are imported. The details are as follows: 1. The Mazda CX30 is an imported model, but not all of its three major components are imported. 2. The three major components refer to the engine, transmission, and chassis. The engine and transmission are originally imported, while the chassis is domestically produced. Below is additional information about the Mazda CX3: 1. The Mazda CX3 is positioned as a compact SUV. In terms of body dimensions, the length, width, and height are 4275x1765x1548mm, with a wheelbase of 2570mm. The height of the high-end version is 1552mm. 2. The Mazda CX30 is a compact SUV equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158PS, a maximum power of 116kW, and a maximum torque of 202Nm, paired with a 6-speed manual transmission. 3. The Mazda CX30 features front-wheel drive, with a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension, with electric power steering.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.