Should the Brake Be Pressed or Released When Shifting Gears in a Manual Transmission?

2 Answers
ElainaDella
07/25/25 3:11pm
When shifting gears in a manual transmission, the brake should be released. During gear shifting, the clutch and accelerator must be coordinated properly. Fully depress the clutch, then release the accelerator pedal, and quickly shift to the appropriate gear. Master the Correct Hand Position: Many drivers often neglect the correct hand position for gear shifting, sometimes casually using two or three fingers to flick the gear lever, which is neither standardized nor safe. The correct hand position for shifting is to cover the gear lever head with the palm facing downward and grip it firmly before shifting. Driving Precautions: Avoid driving in low gear for extended periods: If driving at low speeds for a long time, the speed is low but the engine RPM is high, resulting in fewer miles covered per unit of time and relatively increased fuel consumption. Therefore, it is recommended to shift up to the appropriate gear as soon as possible after starting the vehicle, unless it is a cold start in low temperatures. Generally speaking, higher gears are more fuel-efficient than lower gears.
Was this review help?
1
3
Share
LeGabriella
08/11/25 9:22pm
我开手动挡几十年了,情况是这样的:当你在行驶中换挡时,比如在高速公路或城市街道上正常变速时,根本不需要踩刹车踏板。相反,你应该完全踩下离合器踏板以断开发动机与车轮的连接,将换挡杆移至所需档位,然后在释放离合器的同时轻踩油门以匹配发动机转速。这样一切都能自然流畅地进行,不会有任何顿挫感。刹车应该留到你主动减速时使用,比如在停车标志前,或者在山坡上起步时——这时你需要踩刹车以防止在操作离合器时溜车。总的来说,关键在于时机和离合器的控制;掌握这些技巧会让驾驶手动挡变得轻而易举,也能避免刹车不必要的磨损。
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What are the reasons why Buick CarPlay cannot connect?

The reasons why Buick CarPlay cannot connect are as follows: 1. Check whether the mobile phone data cable is damaged or broken, and whether there are foreign objects attached to the metal contact terminals on the USB plug and the mobile phone plug or whether the surface is oxidized. 2. Check whether the USB female port inside the external USB-HUB of the car host is damaged, and whether the contact metal piece can maintain good contact with the USB male head. 3. Check whether the connection between the car host and the external USB-HUB is loose. To avoid poor contact inside the plug caused by long-term oxidation, you can repeatedly plug and unplug the two plugs of the wiring. 4. Restore the car host system to factory settings. Before restoring the factory settings, be sure to back up and transfer the important information saved in the system to prevent loss during restoration. 5. Restart the mobile phone and try plugging it in again.
12
4
Share

How to Use the CD Player in BMW 7 Series?

When inserting a CD, press and hold the LOAD button until the screen displays, then insert the disc. To load a second CD, press the Load button again until "in" appears on the screen before inserting the next disc. Subsequent CDs can be loaded following the same method. Here are some relevant tips: 1. The CD player requires a certain time interval when switching between functions. However, some drivers impatiently press the function button repeatedly before the player is ready or the function transition is complete. Excessive pressing may cause the CD player to jam due to overly frequent function requests. For example, when using a built-in multi-disc CD player, some drivers may want to skip from the first disc to the fifth. 2. The most common operation is rapidly pressing the "next" function button four times. Sometimes, pressing it two extra times may skip past the desired disc, leading to continuous button pressing, which increases the risk of jamming. 3. Extra caution is required when using CDs that are too small or irregularly shaped, such as 8cm discs, triangular discs, square discs, overly thick discs, discs with homemade labels, sealed discs, or discs with plastic rings.
14
5
Share

Does the Bin Yue Use a Volvo Engine?

The Bin Yue is equipped with a 1.5T three-cylinder engine jointly developed by Geely and Volvo. Here are the relevant details: 1. Maximum power is 177PS, peak torque is 255N.m, paired with a 7-speed wet dual-clutch transmission. The official fuel consumption data is 5.4L/100km, and it accelerates from 0 to 100km/h in just 7.9 seconds. 2. The main difference in the Bin Yue's engine lies in the turbocharger. Currently, mainstream engine technologies such as low-inertia turbochargers, integrated exhaust manifold in the cylinder head, aluminum cylinder block and head, balance shaft, dual-mass flywheel, and two-stage variable oil pump are all applied. 3. The cooling system features split cooling for the cylinder block and head. Water from the water pump is distributed with 16% entering the cylinder block and 84% entering the cylinder head, ensuring optimal operating temperatures for different parts of the engine (the ideal operating condition is a cooler cylinder head and a warmer cylinder block).
12
3
Share

What does it mean when a Buick displays 'Please Service Battery Charging System'?

When the dashboard displays the message 'Please Check Charging System,' it indicates a malfunction in the vehicle's electrical system, requiring inspection and repair at an automotive service center. Below is more relevant information: 1. Cause Analysis: Since the car battery cannot provide long-term power supply to the vehicle's electrical system, it needs to be charged. When the engine is running, it supplies power to the battery and charges it with alternating current. If there is an issue with the charging system, it means there is a problem in the process of the engine supplying power to the battery, which needs to be addressed promptly at a service center. 2. Maintenance of the Vehicle Charging System: The grounding polarity of the battery must match that of the generator. Both domestic and imported alternators use negative grounding, so the battery must also be negatively grounded. Otherwise, the battery will discharge a large current through the diodes, potentially burning them out. While the generator is running, avoid using spark testing methods to check if it is generating electricity, as this can easily damage the diodes and other electronic components.
9
4
Share

Can Tesla be charged with 220V household electricity?

Tesla can be directly charged with a 220V power supply. The simplest charging methods for Tesla include charging via a standard household circuit or modified circuit, while more efficient charging methods involve high-power wall-mounted charging connectors, shared charging stations, and Tesla Superchargers. The charging times for different charging methods are detailed as follows: 1. Standard household circuit: It takes 46 hours and 17 minutes to fully charge. 2. Modified circuit charging: Tesla recommends upgrading the garage circuit to 240V, 40A. A Model S with a standard single charger requires 8 hours and 19 minutes to fully charge. 3. Efficient charging: Install a high-power wall-mounted charging connector in the garage or outdoors, with a voltage range of 20-250V, 60Hz, and current adjusted to 40-100A. In this scenario, a Model S with a standard single charger still requires 8 hours and 19 minutes to fully charge. A Model S equipped with dual chargers only needs 4 hours and 9 minutes to fully charge.
4
0
Share

In which year does a 2007 car require two inspections per year?

By 2022, it will require two inspections per year. 1. Inspection regulations: According to regulations, family-use small cars with 7 seats or fewer (including 7 seats) are exempt from on-site inspections for the first 6 years from the date of purchase. However, it is necessary to collect the annual inspection sticker and environmental protection sticker from the vehicle management office every two years. After 6 years, an annual inspection is required, and for cars over 15 years old, two inspections per year are required. 2. Introduction to inspections: An inspection refers to giving the vehicle a physical examination, promptly eliminating potential safety hazards, and checking whether components such as the engine, brakes, and lights are functioning properly. The inspection requires the vehicle to be on-site for examination, with both the person and the vehicle needing to participate. The annual review, however, does not require the vehicle to be present. The owner needs to bring various materials such as the driving license to the vehicle management office for the annual review and to obtain the new inspection compliance label.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.