Should the BMW 5 Series opt for the Harman Kardon upgrade?

1 Answers
LaElaina
07/29/25 8:28pm
The BMW 5 Series offers an optional Harman Kardon audio system. Here's more information about the Harman Kardon system: Principle: The internal amplifier circuit divides the sound into several wavelength segments through a crossover. The mid-to-high frequency range (mid-high tones) is output to satellite speakers, while the mid-to-low frequency range (mid-low tones) is output to a subwoofer. Typically, the subwoofer produces long-wave sounds between 20-200Hz, which are easily audible to humans but difficult to localize due to their long wavelengths. Function: Enhances the bass frequency range, boosting the long-wave portion of the audio below 100Hz, including even infrasound. Since regular speakers have limited size and cannot produce longer wavelength low-frequency sounds effectively, a larger subwoofer is required to create impactful low-frequency effects.
Was this review help?
20
0
Share
More Forum Discussions

Is 97 octane gasoline now 98 octane?

97 octane gasoline is not the same as 98 octane gasoline. More relevant information is as follows: 1. Emissions: This is simply different gasoline grades. 97 octane gasoline still adheres to the National IV emission standards, while 98 octane gasoline generally meets the National V emission standards, offering better anti-knock performance. 2. Gasoline grades: Gasoline grades are differentiated based on the octane number added to the gasoline. The higher the octane number, the better the anti-knock capability and the higher the quality of the gasoline. Currently, most vehicles require unleaded gasoline with an octane rating above 90. High-performance cars like sports cars, with their powerful engines, have high cylinder compression ratios during operation and require gasoline with excellent anti-knock properties. The higher the octane rating, the more suitable it is for engines with high compression ratios. 97 octane gasoline has a lower octane number than 98, so 98 provides better anti-knock performance than 97.
12
2
Share

Does the Sagitar have a keyhole for one-button start?

Sagitar has a keyhole for one-button start. Here is the relevant introduction about Sagitar's one-button start: 1. A button device that simplifies the ignition process. 2. The car's one-button start can be modified at the original key lock position or installed independently on the panel. 3. The functions of the one-button start intelligent system include automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, and one-button shutdown. 4. Automatic locking before driving and automatic unlocking when parking and shutting down. Here is the relevant introduction about Sagitar's keyless entry system: 1. When carrying the smart key near the vehicle, just lightly touch the inner side of the door handle, and the door will automatically unlock, allowing you to directly open the door and enter the car. 2. After entering the car, press the brake and touch the START ENGINE STOP button to start the vehicle, without the need for traditional cumbersome operations.
20
0
Share

What is the cause of rail pressure fault 523613-2?

Rail pressure fault 523613-2 is a fault code reported when the fuel quantity used by the metering unit to compensate for leakage exceeds the set range. The following are the causes of this fault: 1. Excessive return oil: Excessive return oil from the injector causes high-pressure leakage, which leads to the flow rate in the metering unit exceeding the upper limit. 2. Wear of the pressure relief valve seat surface: Wear of the pressure relief valve seat surface on the fuel rail causes high-pressure leakage, which leads to the flow rate in the metering unit exceeding the upper limit. 3. Improper assembly of the high-pressure push rod: For four-valve injectors with a split high-pressure push rod, improper assembly of the high-pressure push rod can also cause excessive leakage and report this fault. 4. Blockage of the oil inlet hole: If the injector nozzle seat surface is stuck or the oil inlet hole on the side of the valve seat is blocked by particles, it will cause continuous injection, and this fault will also be reported.
9
1
Share

What Precautions Should Be Taken When Installing Spark Plugs?

Precautions for replacing spark plugs are as follows: 1. It is best to replace them when the engine is cold. 2. When removing, pull from the base of the high-voltage wire, not directly from the wire itself, to avoid breaking the inner core. Also, mark the positions of each cylinder's high-voltage wires before removal to avoid confusion. 3. Before installing the spark plug, ensure that the new spark plug matches the engine of the vehicle being serviced. Extension: The material of the spark plug has a decisive impact on its replacement interval. The mainstream spark plugs on the market include copper core, nickel alloy core, platinum core, and iridium core. Copper core spark plugs are recommended to be replaced every 20,000–30,000 kilometers. Nickel alloy spark plugs have a slightly longer replacement interval, around 40,000–60,000 kilometers. Iridium and platinum core spark plugs have more stable metal properties and better oxidation resistance, resulting in a much longer service life. Platinum core spark plugs are recommended to be replaced every 80,000 kilometers, and iridium core spark plugs every 100,000 kilometers.
18
5
Share

What is the normal negative pressure for the EA888 engine?

The normal negative pressure for the EA888 engine is around 1200-1300KPa. Here are the specific details about the EA888 engine: 1. Power Configuration: The EA888 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power of 118kw and a maximum torque of 250Nm; the 2.0TSI can reach a maximum power of 147kw and a maximum torque of 280Nm. 2. Working Principle: The working principle mainly involves controlling the hydraulic oil in the corresponding pipelines through the camshaft adjustment valve to drive the blades in the adjuster, thereby rotating the camshaft to advance or delay the opening and closing of the valves. 3. Direct Injection System: The fuel pump of the EA888 engine is a structurally simple single-plunger pump, driven by a square (four-point) cam on the intake camshaft. The four-point cam synchronizes the fuel supply stroke of the pump with the corresponding injection process of each cylinder, ensuring better uniformity and repeatability of fuel injection across all cylinders.
3
2
Share

What is the difference between Energy XM2 and XM2+?

The difference between Energy XM2 and XM2+ lies in the fact that XM2+ is the next-generation product of XM2. Below is an introduction to their differences: 1. Wear resistance: As an enhanced version, XM2+ not only maintains the consistent characteristics of the Energy series, such as a strong and sturdy tire body and short braking distance, but also further enhances the wear resistance of the Energy series, helping to reduce the wear rate and achieve ultra-long mileage. 2. Braking distance: The braking distance of XM2+ is shorter than that of XM2. According to the wet braking test conducted by the China Automotive Technology and Research Center, the average braking distance of new XM2+ tires is 9.80% shorter than that of XM2. 3. Technology: XM2+ adopts the new IronFlex technology, with the tire skeleton made of high-strength cord fabric, making the tire more robust and improving its damage resistance. The optimized tire body structure allows the tire sidewall to quickly disperse pressure when subjected to unexpected stress, ensuring the tire's toughness and enhancing its damage resistance.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.