Should the Avancier use 92 or 95 octane gasoline?

1 Answers
FelixLynn
07/29/25 3:21pm
The Avancier requires 92 octane or higher unleaded gasoline, as clearly stated on the official website under the engine and chassis system specifications. The Avancier is a 5-door, 5-seater midsize SUV with body dimensions of 4858mm in length, 1942mm in width, and 1670mm in height, with a wheelbase of 2820mm. It is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 142 kW and a maximum torque of 243 Nm. The drivetrain is front-engine, front-wheel drive, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.
Was this review help?
11
1
Share
More Forum Discussions

What Causes Engine Oil Leakage?

Reasons for engine oil leakage: 1. Damaged oil pan: As the container for storing engine oil, the oil pan will immediately leak oil once damaged; 2. Loose or stripped drain plug: If the vehicle is undergoing maintenance or an oil change, and the staff's negligence or improper operation causes the plug to loosen or strip, the engine will inevitably leak oil; 3. Excessive crankcase pressure: When too much oil is added, or the crankcase ventilation system fails, causing the mixed gas entering the cylinders to continuously accumulate, resulting in excessive internal crankcase pressure, the high-pressure gas will force the oil out from the seals, causing oil leakage.
1
1
Share

What does 5S in automobiles refer to?

Automotive 5S refers to vehicle sales, parts sales and promotion, system information feedback, maintenance, and used car transactions. More detailed explanations are as follows: 1. Introduction: 5S refers to five subdivided services within after-sales service, a service approach primarily originating from Japan. 2. The key points of implementing automotive 5S are: Seiri (Sort), mainly referring to establishing the correct value awareness. Seiton (Set in order), referring to the correct method + organizational techniques. Seiso (Shine), referring to responsibility, mainly clarifying job responsibilities. Seiketsu (Standardize), mainly referring to institutionalization and assessment. Shitsuke (Sustain), mainly referring to long-term implementation.
4
2
Share

What documents are required for vehicle pickup?

Vehicle pickup requires the vehicle registration certificate and ID card. Precautions for vehicle pickup are as follows: 1. Pay attention to the inspection of the vehicle's paint surface: When picking up the car, conduct a detailed inspection of the entire vehicle's paint surface. After the vehicle leaves the factory, during transportation and until the final sales process, the paint surface is most susceptible to damage. If the relevant staff is slightly careless, it may cause collisions or scratches to the paint. Park the vehicle in a well-lit environment for inspection, carefully observe whether the color and smoothness of the paint are uniform. Any repainted areas will inevitably leave traces to some extent. 2. Pay attention to checking whether the vehicle's seams are uniform: If the vehicle's body panels have been replaced or bodywork has been done, it is difficult to ensure the uniformity of the body seams. If the gaps between the seams are inconsistent or the transitions are not smooth and natural, it is likely to be an accident vehicle.
8
2
Share

What Does Single Pedal in Cars Mean?

Single pedal in cars refers to a feature where one pedal can function as both the accelerator and brake. The specific details are as follows: 1. Introduction: Single pedal allows the vehicle's acceleration and braking operations to be completed with just one accelerator pedal. Of course, the single pedal mode does not mean that both the accelerator and brake are on the same pedal; there are still two pedals in reality, one for the accelerator and one for the brake. 2. Function: After activating the single pedal mode, when accelerating, the car moves quickly, but as soon as the accelerator is released, you can immediately feel the car decelerating very rapidly. This is because the single pedal mode in new energy vehicles involves so-called kinetic energy recovery. Kinetic energy recovery means that when the accelerator is not pressed, the energy from movement can be recovered and used for reverse charging.
9
5
Share

What documents are required for vehicle gas refueling?

Vehicle gas refueling requires an ID card. More information about natural gas vehicles is as follows: 1. Introduction: Natural gas vehicles are powered by natural gas as fuel. Natural gas, with a methane content of over 90%, is an excellent fuel for car engines. Natural gas vehicles have been widely promoted and applied in various provinces and cities worldwide and in China. 2. Features: Stable combustion without knocking, and convenient cold and hot starts. The storage, transportation, decompression, and combustion of compressed natural gas are carried out under strict sealing conditions, making leaks unlikely. Additionally, the gas cylinders undergo various special destructive tests, ensuring safety and reliability. Compressed natural gas burns safely, with less carbon deposits, reducing vapor lock and knocking, which helps extend the service life of various engine components, decrease the frequency of maintenance, and significantly lower maintenance costs.
12
2
Share

Where are the headlights located?

Headlights are located on both sides of the front end of a vehicle. Below are relevant introductions: Requirements for illumination distance: To ensure driving safety, it is necessary for the driver to identify any obstacles on the road within 100 meters ahead. The high beam of a car is required to illuminate a distance of more than 100 meters. This data is determined based on the vehicle's speed. As modern vehicle speeds increase, the required illumination distance may also increase. The low beam of a car illuminates a distance of about 50 meters. The primary requirements for positioning are to illuminate the entire road surface within the lighting distance and to avoid deviating from the road surface. Anti-glare requirements: Vehicle headlights should be equipped with anti-glare devices to prevent the driver of an oncoming vehicle from being dazzled during nighttime encounters, which could lead to traffic accidents. During nighttime encounters between two vehicles, the beam is tilted downward to illuminate the road surface within 50 meters ahead, thereby avoiding dazzling the driver of the oncoming vehicle.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.