Should the Auxiliary Battery Be Replaced if It Malfunctions?

1 Answers
JohnnyAnn
07/30/25 9:32am
Pay attention to checking the condition of the battery, and replace it promptly if there are any issues. Below is an introduction to battery-related information: Charging method: Use constant voltage with current limiting for charging. Duration: Charge at a constant voltage of 14.8V with a current limit of 15A for 16 hours, followed by a constant current of 3A for 4 hours, totaling 20 hours. Below is extended information on battery charging voltage and current: Voltage: The charging voltage for motorcycles is 12V. During the charging process, the charging voltage is mostly between 13.5-14.5V. When charged on the vehicle by the rectifier, it will not exceed 15V. If a charger is used, the charging voltage is generally 14V. Current: During the charging process for motorcycles, the charging current should not be too large. It is recommended that car owners avoid using fast charging. When charging, use half of the rated charging current and extend the rated charging time by double.
Was this review help?
14
1
Share
More Forum Discussions

Will Body Shaking in Subject 3 Result in Point Deduction?

Shaking will not result in point deduction. Introduction: Subject 3 includes the road driving skills test and the safety & civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety & civilized driving knowledge test subjects in the motor vehicle driver examination. The content of the road driving skills test varies for different permitted driving vehicle types. Specific Test Content of Subject 3: The road driving skills test generally includes: vehicle preparation, lighting simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. The safety & civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
10
5
Share

What are the requirements for applying for an electronic driver's license?

As long as the driver's license is within the validity period, it is acceptable. Definition of electronic driver's license: As a supplement to the physical license, in the absence of the physical license, electronic documents can also be used for road inspections and other purposes. Development history of electronic driver's license: On April 12, 2017, the Yancheng Traffic Police launched an electronic driver's license, mainly to provide convenience for the public, not to advocate or encourage drivers not to carry their driver's licenses with them. On May 10, 2021, the Ministry of Public Security held a press conference to release 12 convenience measures for deepening the reform of public security traffic management and serving the people. It announced that starting from June 1, 2021, the electronicization of motor vehicle driver's licenses would be piloted in three cities: Tianjin, Chengdu, and Suzhou.
2
3
Share

How to Disassemble the Brake Caliper Piston?

First, position the caliper bleeder bolt upwards and loosen the bleeder bolt. Then, push the caliper piston inward to allow the air inside the caliper to escape. Finally, use internal retaining ring pliers to remove the piston retaining ring on the pump cylinder, and then install the new parts in order.
11
0
Share

How to Stop the Car When the Brakes Fail?

For manual transmission cars when the brakes fail, use the engine to decelerate by gradually downshifting to lower gears. Do not shift directly from 5th gear to 1st gear; it's best to downshift one gear at a time. For automatic transmission cars when the brakes fail, gradually shift the gear from D to lower gears like 1, and finally use the handbrake or electronic brake button.
12
3
Share

What is the repair method for a damaged front bumper?

Because the bumper is made of a special plastic material that softens when heated, hot water can be used. Prepare the tools, place the repair tool on the dented area, and pull it out with force.
3
2
Share

How to distinguish the patterns between the front and rear windshields?

The front windshield features a fan-shaped symbol with three curved upward arrows, while the rear windshield has a rectangular symbol with three curved upward lines. The front windshield has an inclined central spray line, whereas the rear windshield has a rectangular central spray line.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.