Should the Air Filter Be Replaced During a Minor Maintenance?

1 Answers
VonMariana
07/29/25 10:30pm
Generally speaking, the air filter is usually replaced during each maintenance session. That is to say, approximately every 7,500 to 10,000 kilometers. Air Filter Replacement Interval: How often the car's air filter should be replaced actually depends on the usage conditions. For typical urban family cars, it is recommended to replace it every six months or once a year. If you usually drive on roads with a lot of dust, more dust will enter the car, making the air filter very dirty. Additionally, if users prefer parking under large trees or temporarily stopping near trees, the tree fruits may fall on the air filter's intake, which can also make the air filter very dirty and require earlier replacement. Car Minor Maintenance: Minor maintenance generally refers to the routine maintenance tasks performed at the intervals or mileage specified by the manufacturer to ensure vehicle performance. It mainly includes changing the engine oil and the oil filter.
Was this review help?
8
5
Share
More Forum Discussions

What is the method to reset the Mercedes-Benz window lift switch?

Mercedes-Benz window lift switch reset method is: 1. Open the driver's door of the Mercedes-Benz; 2. Depress the brake pedal of the Mercedes-Benz and start the engine; 3. Press the one-touch start button of the Mercedes-Benz; 4. All dashboard lights of the Mercedes-Benz will illuminate, and the engine will start; 5. Lift the window lift switch manually to fully raise the window, then hold the window lift switch without releasing it for more than 10 seconds. Taking the 2021 Mercedes-Benz A180 as an example, it belongs to the compact car category, with body dimensions of: length 4419mm, width 1796mm, height 1432mm, and a wheelbase of 2729mm. The 2021 Mercedes-Benz A180 features a front suspension of MacPherson strut independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 136PS, maximum power of 100kW, and maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
12
3
Share

What is the reason for the AC light not turning on?

The reasons for the AC light not turning on are: 1. The AC switch is burnt out; 2. The fuse is blown. The AC in a car's air conditioning system refers to the air conditioning compressor switch. When the AC button is pressed, the cooling system of the air conditioning compressor will operate. The car's AC button is located below the display screen, and its functions include: adjusting and controlling the temperature, humidity, air cleanliness, and airflow state inside the car cabin. How to use the car air conditioning AC: 1. Start the car engine after getting in; 2. Turn on the car's AC button; 3. Rotate the fan button to adjust the air volume and select the cooling or heating intensity. Precautions for using the air conditioning include: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Avoid prolonged use; 4. Appropriately turn on high air volume; 5. Turn off the air conditioning when driving at low speeds.
5
5
Share

Where is the DPF regeneration switch for the Great Wall Cannon?

The DPF regeneration switch for the Great Wall Cannon is located behind the steering wheel. Taking the 2020 Great Wall Cannon as an example, it is a pickup truck with the following dimensions: length 5437mm, width 1958mm, height 1893mm, wheelbase 3230mm, minimum ground clearance 228mm, and fuel tank capacity 80L. The 2020 Great Wall Cannon is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, maximum torque of 360Nm, and maximum power of 140kW. The front suspension is a double-wishbone independent suspension, while the rear suspension is a multi-link solid axle non-independent suspension. The drivetrain features front-engine four-wheel drive, paired with an 8-speed automatic transmission.
8
1
Share

Should the Old Tiguan Use 95 or 92 Octane Gasoline?

The old Tiguan should use 95 octane gasoline, as this is the fuel grade officially recommended in the vehicle's user manual. In addition to checking the appropriate gasoline grade in the user manual, the old Tiguan also has this information indicated on the fuel tank cap. The fuel grade can usually be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the old Tiguan occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the tank is empty. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane fuel, using higher-octane gasoline will not cause damage, but the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane fuel, using lower-octane gasoline can cause engine knocking. Due to the significantly lower octane number, the fuel may ignite prematurely during the compression stroke, creating resistance before the spark plug fires. This resistance can make the engine run very unstably. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.
19
0
Share

What are the steps for using an automatic transmission fluid exchanger?

Steps for using an automatic transmission fluid exchanger: 1. Locate the vehicle's external exchanger connection port; 2. Identify the inlet and outlet hoses of the connection port; 3. Connect the exchanger's hoses to the machine and fill the container with automatic transmission fluid. Functions of the transmission: 1. Alter gear ratios to meet varying traction requirements under different driving conditions; 2. Enable reverse driving; 3. Interrupt power transmission to the drive wheels during engine startup, idling, gear shifting, or when stopping power output. Methods for troubleshooting automatic transmission issues: 1. Perform computer diagnostics and replace faulty electronic components; 2. Repair damaged mechanical components; 3. Inspect the engine and ABS system, repairing any defective parts; 4. Systematically analyze potential causes including high engine coolant temperature, transmission clutch slippage, insufficient cooling, or blocked vehicle cooling grilles. Functions of the transmission: 1. Change gear ratios to accommodate different traction needs; 2. Allow reverse movement; 3. Disengage power transmission to drive wheels during engine start, idle, gear changes, or when stopping power output.
2
4
Share

What are the common issues with the Hyundai Santa Fe engine?

The common issues with the Hyundai Santa Fe engine are: 1. Oil leakage from the valve cover gasket; 2. Oil leakage from the cylinder head gasket; 3. Burning oil due to aging valve stem seals. Taking the 2020 Hyundai Santa Fe as an example, its body dimensions are: length 4930mm, width 1910mm, height 1720mm, wheelbase 2865mm, fuel tank capacity 71l, and curb weight 1775kg. The 2020 Hyundai Santa Fe features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0T turbocharged engine with a maximum horsepower of 230ps, maximum power of 169kw, maximum torque of 353nm, paired with an 8-speed automatic transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.