···
Log in / Register

Should the air conditioning be set to cooling mode in summer?

4 Answers
DiIsaac
08/31/2025, 01:16 AM

In summer, when using the air conditioning for cooling, you need to press the AC button. The blue zone indicates cold air, and the higher the gear, the greater the wind speed. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. During summer, the temperature difference between the inside and outside of the car is significant. When entering the car, it is not advisable to immediately set the air conditioning to a very low temperature. It is recommended to first use high natural airflow to disperse the hot air inside the cabin, and then not to close all windows completely. Wait until the body gradually adapts, then adjust the air conditioning to the desired temperature before closing the windows. This way, the body won't experience discomfort due to the sudden drop in external temperature.

Was this review help?
13
2
Share
Elmer
09/12/2025, 04:29 AM

In summer driving, the air conditioning is definitely set to cooling mode. As an experienced driver, I know very well that in hot weather, the temperature inside the car can soar to over 40°C, making it extremely uncomfortable without cooling. After starting the vehicle, press the A/C button to activate the cooling function, then set an appropriate temperature, such as around 25°C, to balance comfort and fuel consumption. Some cars have automatic air conditioning—just press the AUTO button, and the system will adjust the airflow and temperature automatically. Additionally, remember to check if the air conditioning system is cooling properly before traveling on hot days. If the air isn’t cold, it might be due to insufficient refrigerant or a clogged filter, so regular maintenance is recommended to prevent minor issues from becoming major ones. For energy efficiency, using the recirculation mode can cool the car faster and reduce energy consumption. Safety is also crucial—lack of cooling can lead to distraction or fatigue, especially during long trips.

Was this review help?
5
1
Share
Expand All
EverlyLee
10/26/2025, 10:32 PM

Turning on the air conditioning for cooling in summer is a must, based on my experience. After years of driving, I've learned that when temperatures rise, the car becomes like an oven. Activating the cooling system brings instant relief, and the operation is straightforward: start the engine, press the A/C button to select cooling, then adjust the temperature knob. Cars with automatic climate control are even more convenient—just hit the AUTO button, and it intelligently manages airflow and cooling efficiency. Failing to use the AC promptly not only compromises comfort but can also lead to distraction due to heat, increasing accident risks. For maintenance, I recommend checking the AC system at least annually to ensure cooling efficiency hasn't declined, topping up refrigerant or cleaning the evaporator if needed. A useful tip is setting the target temperature wisely—around 25-27°C is ideal, balancing comfort and fuel efficiency. Overlooking this detail in scorching summers can escalate into safety hazards, affecting driving security.

Was this review help?
19
2
Share
Expand All
LaAddyson
12/09/2025, 09:48 PM

Of course, you need to turn on the air conditioning for cooling in summer. I remember when taking my family out for a trip, the car felt like a steamer without cooling, and even the kids couldn't stand it. After starting the car, press the A/C button to select the cooling mode, set a comfortable temperature like 24-26°C, and adjust the fan speed to a moderate level. The automatic air conditioning is very convenient—just enable the AUTO function, and it will regulate everything by itself. An energy-saving tip is to use the recirculation mode for quick cooling to avoid excessive fuel consumption. For maintenance, regularly replace the air filter to ensure air quality.

Was this review help?
2
3
Share
Expand All
More Forum Discussions

How many people can the Audi TT seat?

Under safe conditions, it can seat 2 people. The Audi TT is a sports car, and under normal circumstances, the rear seats of the Audi TT cannot accommodate adults. The seating layout of the Audi TT is divided into two types: one is a two-seater version, and the other is a four-seater version. In the two-seater version, the rear seats definitely cannot accommodate people. In the four-seater version, it can only seat people around 1.5 meters tall. Introduction to the Audi TT: The Audi TT is a sports car developed by Audi, first launched in 1998. As a sports car, the TT model achieved great success in the market with its almost identical beautiful appearance to the concept car version and outstanding performance. Interior Design: The interior of the TT features a large amount of aluminum alloy trim, filling the entire cabin with a metallic aesthetic. The air vents, dashboard, and other buttons are all designed with a circular theme to echo the smooth exterior. These meticulous designs fully demonstrate its outstanding and prestigious style.
8
2
Share

Can the Mercedes-Benz C300 be started remotely?

Owners can start the vehicle directly with the key. The Mercedes-Benz C300's one-touch start button is located at the lower right corner of the dashboard. Starting/Stopping the Engine with the Key: To start, press the ignition button while firmly depressing the brake pedal. To stop, ensure the vehicle is fully stationary before pressing the ignition switch again. Starting the engine requires a significant current, so power to other devices will be temporarily cut off during ignition. Turning the Power On/Off with the Key: Sometimes, you may only need to turn on the vehicle's power. In this case, press the one-touch start button without depressing the brake pedal. To turn off, press the start button once more, and all dashboard lights will go out. Correct Gear Shifting Sequence When Turning Off the Engine: Stop the vehicle, depress the brake, shift to N (Neutral), release the brake, engage the handbrake, turn off the engine, and then shift to P (Park). Engaging the handbrake before shifting to P prevents potential slight vehicle movement, which could cause the transmission lock mechanism to bear excessive pressure and lead to mechanical impact upon restarting. Emergency Shut-off Function: In special circumstances, the engine can also be shut off while the vehicle is moving at speeds above 7 km/h. To shut off the engine, briefly press the one-touch start button twice in succession or hold it down for an extended period.
19
2
Share

Where is the reverse light switch located on the Baojun 560?

The reverse light switch is located on the transmission. When driving on the road, it's important to pay attention to the use of low beam and high beam headlights. Low beam headlights: Low beam headlights should be turned on when driving at night on roads with streetlights, when encountering pedestrians on the roadside at night, and when navigating narrow roads, narrow bridges, or curves. At night, when approaching an intersection, you should toggle between low and high beams twice. However, constantly rotating the switch back and forth can be inconvenient. Fortunately, there's a shortcut with this combination switch: when in low beam mode, lifting the combination light switch upwards will activate the high beams, and releasing it will return to low beams. High beam headlights: High beam headlights should be turned on at night when there are no streetlights on the roadside or when the road is straight and visibility is poor in the distance. Rotating the switch one notch forward will activate the high beams. When encountering oncoming traffic at night, if you have the high beams on, you must turn them off until the oncoming vehicle has passed, then you can turn the high beams back on. If you don't turn them off, the glare from the high beams can impair the vision of the other driver and potentially cause an accident.
5
2
Share

How to Fix the Ford Engine Malfunction Light?

There are mainly 7 reasons for the engine malfunction light to illuminate: Sensor failure: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine malfunction light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the malfunction light. Poor combustion of air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake boost piping and turbocharger can also cause the engine malfunction light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust. Intake issues: If the vehicle's intake system has problems, it may lead to engine piping blockage, and in severe cases, the engine malfunction light will illuminate. A dirty air filter that is not cleaned regularly can cause intake problems. Exhaust issues: Exhaust system failures can also trigger the engine malfunction light. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are common causes of exhaust problems, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system failures can easily cause catalytic converter problems. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and trigger the malfunction light. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally and if there are any issues such as shaking or smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can start, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will enter self-check mode after powering on. Wait for 5-10 seconds and observe if the malfunction light turns off. If the malfunction light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.
16
3
Share

How Many Attempts Are Allowed for the Driving License Subject 1 Exam?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulate that on the day of the Subject 1 exam, candidates can take the test twice. If the first attempt is unsuccessful, a second free retake is allowed. If the second attempt also fails, the Subject 1 exam for that day is terminated, and the candidate must wait ten days before scheduling another exam. Subject 1, also known as the theoretical driving test or driver theory test, is part of the motor vehicle driving license assessment. The exam content includes the theoretical basis of driving, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. A passing score for the Subject 1 exam is 90 out of 100, with the test consisting of 100 questions, including single-choice and true/false questions, each worth 1 point. If a candidate answers 11 questions incorrectly during the exam, the system will automatically submit the test and end the session. Subject 1 exam content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately for the exam, no slippers are allowed, and electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting area. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the exam hall. Upon entering the exam hall, candidates will be assigned a seat at the identity verification station. After finding your seat, begin the exam. Ensure the camera is aligned with you and adhere to exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Without a signature, the result is invalid. There is no limit to the number of times you can schedule the Subject 1 exam. Each subject allows one exam attempt, with one retake if you fail. If you do not take the retake or fail the retake, the exam session is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, only five exam attempts are allowed. Subject 2 and Subject 3 exams must be scheduled ten days later. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe driving knowledge test. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security's Order No. 123) does not include "Subject 4."
16
3
Share

Where is the QR code for motor vehicles?

The QR code for motor vehicles is located at the bottom left corner of the front windshield, and in some cities, it is also found on the license plate. The QR code contains license identification information such as the issuing authority, unique serial number, and license plate number, as well as technical parameters of the vehicle and owner information. Only internal traffic police equipment can scan the QR code; ordinary mobile phones cannot recognize the QR code on the license plate, preventing the leakage of personal information. The specific application of QR code vehicle management involves the management of vehicle information, safety, inspection, and approval. As a means of transportation, vehicles and their drivers are constantly in dynamic motion through time and space.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.