Should the AC be turned on for heating?

1 Answers
WillowDella
07/30/25 3:56am
Car heating does not require turning on the AC. The AC button activates the compressor, which is used for cooling. Warm air comes from the engine radiator, and when the heating is turned on, the air duct connects to the engine radiator compartment, at which point the AC cooling duct should be closed. Below is a brief introduction to the car heating system: 1. Function: The car heating system is designed for heating, defrosting, and adjusting temperature and humidity. 2. Working principle: Cold air is blown over the surface of the heat exchanger, absorbing its heat and directing it into the car, thereby increasing the interior temperature. Additional information: The main function of the car air conditioning heating system is to adjust the air to a comfortable temperature for passengers together with the evaporator, providing pure heating in winter to improve the interior environment temperature.
Was this review help?
5
1
Share
More Forum Discussions

Where is the long wiper blade installed on the Chery A3?

Chery A3 installs the long wiper blade on the driver's side (right) and the short wiper blade on the passenger side (left). The reason for placing the wiper on the right side is to enhance the driver's visibility during rainy conditions and to prevent collisions between the two wipers during operation. By convention, most vehicles install the longer wiper on the driver's side and the shorter one on the passenger side. Most vehicle wipers operate in the same direction, from left to right, known as "sweeping." To avoid interference with the driver-side wiper during operation, the passenger-side wiper is typically slightly shorter. As a result, it is common to see cars with one long and one short wiper blade. The function of the wiper is to remove raindrops and dust from the windshield, improving the driver's visibility and enhancing road safety. Due to legal requirements, nearly all vehicles are equipped with wipers, including hatchbacks and SUVs, which often have rear window wipers as well.
19
0
Share

Can the small center console screen of BMW E60 be replaced with a larger one?

BMW E60's small center console screen can be replaced with a larger one. For specifics, you can consult the after-sales service at a 4S shop. Steps to replace the small screen with a larger one: First, remove the original small screen. On the right side of the left storage compartment, there are two small screws. Use a tool to pry out the cover over the screws. After removing the screws, use a plastic tool to pry up the center console screen—do not use metal tools to avoid damaging the edges. Then, remove the original small screen. Next, install the original larger screen. When removing the small screen, there are clips inside; attach these clips to the larger screen and press it into the position where the small screen was, gently pressing a few times until the surface difference with the center console meets the required consistency. Installation precautions: It is essential to choose a professional shop for replacing the center console screen and have the best technician perform the installation; otherwise, significant problems may arise.
6
1
Share

What are the warning lights on the car dashboard?

Car dashboard warning lights include the engine oil warning light, engine fault warning light, coolant temperature warning light, brake system warning light, tire pressure warning light, etc. When a warning light illuminates, it indicates a corresponding issue. Car dashboard warning lights: Engine oil warning light; The oil light is a safety alarm device for the engine lubrication system. If the oil light flashes while driving, the engine must be turned off immediately for inspection. Continuing to drive may cause engine damage and compromise driving safety. Engine fault warning light; The engine fault signal is issued by the engine control unit (ECU), which manages all electronic components of the engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering systems like intake, exhaust, fuel, ignition, and timing. Coolant temperature warning light; When this light turns on, it usually indicates overheating. If the coolant temperature reaches 100°C while driving, the temperature warning light will illuminate, commonly referred to as "boiling over." When this happens, pull over safely but avoid shutting off the engine immediately, as overheating can cause engine components to expand and lead to damage upon shutdown. Brake system warning light; This light illuminates when the parking brake is engaged. If it remains lit after releasing the parking brake, it signals a brake system issue, often due to low brake fluid levels or worn brake pads. Continued driving under these conditions risks vehicle integrity and driver safety. Tire pressure warning light; If this light activates, determine whether the pressure is too high or too low. Excessive pressure increases the risk of a blowout, so reduce tire pressure accordingly. Insufficient pressure harms tires and increases fuel consumption—reinflate promptly and inspect for punctures causing leaks. The battery indicator displays the status of the car battery, typically in red or yellow. It lights up during ignition self-check and should turn off after starting. If it stays on, the battery requires inspection or replacement. Power steering fault light; Illumination while driving indicates a malfunction in the power steering system, possibly resulting in reduced or lost assistance. Steering effort will significantly increase, and professional diagnosis is required as this issue cannot be self-repaired. Electronic Stability Control (ESC) indicator; This yellow light shows the ESC system's operational status. Normally, it remains off unless there's a fault or the system is actively engaged.
11
3
Share

What does 'other maintenance' for Teana mean?

Teana's 'other maintenance' refers to the need to replace other fluids. The maintenance schedule and precautions for Teana are as follows: Teana's maintenance schedule: According to the official maintenance schedule, engine oil and oil filter only require routine inspection during the first maintenance. After the second maintenance at 5,000 kilometers, they should be replaced every 5,000 kilometers. The air filter and cabin air filter should be replaced every 20,000 kilometers, with the manufacturer recommending an inspection every 10,000 kilometers. Brake fluid should be replaced every 40,000 kilometers, while spark plugs have a replacement interval of up to 100,000 kilometers. Precautions for Teana maintenance: Under Teana's warranty coverage, within 60 days or 3,000 kilometers of purchase, if major components of the engine or transmission develop problems, consumers can opt for a free replacement of the entire engine or transmission assembly. Additionally, Teana provides two free maintenance services within 1 month or 1,000 kilometers and 3 months or 5,000 kilometers. The first maintenance includes free labor charges (requiring inspection of engine oil and oil filter), while the second maintenance covers both free labor and parts costs. It's important to note that both maintenance services must be performed within the specified time frames; otherwise, the owner will be deemed to have forfeited the right to free maintenance.
7
3
Share

Is there a night test for Subject Three?

Subject Three includes a night test. The Subject Three examination is divided into daytime and nighttime tests, with the nighttime test accounting for a very small proportion. Individual tests are conducted by coaches leading the team to participate in a lottery. If the daytime test is drawn, the nighttime test will not be taken, and vice versa. Content of the Subject Three night test: The night test involves switching between high and low beams. The driving distance during the night test is shorter than during the daytime test. Controlling speed and managing lights properly make it relatively easier to pass. Basic items of the Subject Three test: There are 13 basic items in the Subject Three test, including vehicle preparation, starting, straight-line driving, changing lanes, passing intersections, pulling over, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. Notes and tips for the Subject Three night test: Pay attention to the use of lights: Turn on the vehicle lights when starting the car. Before moving, check the turn signals. During driving, ensure the correct use of low and high beams. When meeting vehicles, non-motorized vehicles, or pedestrians, switch from high to low beams when the distance is less than 150 meters. If the oncoming vehicle does not switch off its high beams, the examinee can flash the high and low beams to signal the oncoming vehicle to switch off its high beams. When overtaking, flash the high and low beams to signal the vehicle ahead to give way. If a vehicle behind flashes its high and low beams during driving, give way as soon as conditions permit. Reduce speed: Nighttime driving narrows the field of vision and shortens the viewing distance, so it is essential to slow down. After completing the operations during the night test, if the examiner requests to turn off the engine, first activate the turn signal and pull over. Then, shift to neutral, engage the handbrake, turn off the turn signal and headlights, release the clutch and brake pedals, and finally turn off the engine with the key.
15
3
Share

What is the real fuel consumption of the Honda Crosstour 2.4?

The real fuel consumption of the Honda Crosstour 2.4 is around 10.2L/100KM. Actual fuel consumption is influenced by many factors. Below is an introduction to the factors affecting a car's fuel consumption: 1. Engine thermal efficiency: From a purely technical perspective, direct fuel injection is an excellent technology that significantly improves fuel combustion efficiency, but it places higher demands on the engine's fuel supply system and cylinder materials. 2. Resistance encountered by the car: (1) Gradient resistance: When a car is driving on an inclined road, the component of its gravity along the road direction manifests as gradient resistance. Clearly, this is mainly related to the car's weight. The heavier the car and the steeper the slope, the greater the force that needs to be overcome, and the higher the car's fuel consumption. (2) Acceleration resistance: When a car accelerates, there is an inertial force present, which is the car's acceleration resistance. According to the momentum theorem, the greater the car's mass and the greater the acceleration, the greater the resistance. Therefore, the heavier the car and the faster it accelerates, the higher the fuel consumption. Generally speaking, the engine's thermal efficiency and the car's mechanical efficiency are designed when the car leaves the factory and cannot be changed, while the car's driving resistance can be controlled. The biggest factor affecting a car's driving resistance is its weight. As long as the car's weight is reduced, the car's fuel consumption will significantly decrease.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.