Should the AC be turned off after the car is turned off?

1 Answers
FinnDella
07/29/25 10:47pm
After the car is turned off, the AC should be turned off. If the AC is not turned off before the car is turned off, the car's air conditioning will automatically turn on the next time the car is started, which can cause damage to the battery. Below is an introduction to the functions and usage methods of the AC switch. Functions of the AC switch: The AC in a car is the compressor switch for the car's air conditioning, also known as the cooling switch. The function of the AC is to cool, heat, ventilate, and purify the air inside the car, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Usage methods of the AC switch: In the hot summer, when the AC button is turned on, the temperature control should be adjusted to the blue position. For automatic air conditioning, a temperature can be set, and then the AUTO button can be pressed, allowing the automatic air conditioning to adjust the interior temperature automatically. In winter when using the heater, the driver does not need to turn on the AC switch.
Was this review help?
13
2
Share
More Forum Discussions

How to Pass Through Waterlogged Sections?

When driving slowly through waterlogged sections, avoid artificially raising the water level, as speeding up can increase the water level. Once the water exceeds the engine's air intake, it can be sucked into the engine, causing it to stall. Relevant details are as follows: 1. Low Speed: When passing through waterlogged sections, as long as the water does not cover more than two-thirds of the tires, the speed does not exceed 5 km/h, and you drive steadily in the lowest gear, you can safely navigate through the water. 2. Steady Driving: Low speed allows the driver to react promptly in case of danger. It also prevents splashing large waves, avoiding water intake into the air intake or exhaust pipe. Additionally, it's evident that a vehicle moving at low speed is less likely to stall, ensuring a smoother and safer passage.
15
3
Share

Is it necessary to arrive 30 minutes early for Subject 1 test?

It is recommended to arrive at least half an hour early before taking the Subject 1 test. Here are the relevant details: Test content: Includes the most basic knowledge such as driving theory foundation, road safety laws and regulations, traffic signals, traffic rules, plus local regulations. The scheduling of driver's theory test is arranged by local vehicle management offices. Subject 1: Part of the teaching and examination outline for motor vehicle driver training. This outline divides the examination into three subjects, organized by the traffic management department of public security authorities. The examination sequence proceeds as Subject 1, Subject 2, and Subject 3. After passing the previous subject, candidates can proceed to the next subject; if failed, they must retake the current subject.
12
1
Share

What to Do If You Disagree with the Traffic Accident Speed Identification?

If the speed identification result affects the liability determination of the traffic accident, you can apply for reconsideration to the traffic police team under the premise of being able to provide evidence. Generally, the driver themselves need to provide evidence related to the speed, but the final identification conclusion is still made by the traffic police department. Relevant information is as follows: 1. Basis: The liability determination by the traffic police department is not the final conclusion. For traffic accident liability and related facts, the court should base its decision on the facts of the case. 2. Application for reconsideration: You can apply for reconsideration to the higher-level public security authority regarding the accident determination; when the case enters the court trial process, you can also raise objections to the identification and request a re-identification.
13
1
Share

Where is Shentong Tire produced?

Shentong Tire is produced by Shenyang Heping Radial Tire Co., Ltd. The following is a detailed introduction to the specifications of automotive tires: Specification model representation: Tires are important components of automobiles, and there are many specifications and models of tires. Different specifications and models of tires are suitable for different types of vehicles. The specification model identification is usually on the side of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. Speed rating: According to the different maximum speeds they can bear, the speed ratings of tires can be divided into different grades from A to Z, among which grade A can be further subdivided into eight different grades from A1 to A8. The further back the letter representing the tire speed rating is, the better the tire performance.
14
3
Share

What is the speed rating code for tires?

Haval F7 body dimensions: length is 4620mm, width is 1846mm, height is 1690mm, wheelbase is 2725mm, positioned as a compact 5-door 5-seat SUV, with a minimum ground clearance of 162mm and a fuel tank capacity of 55 liters. The Haval F7 features a MacPherson strut independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 285 Nm, paired with a 7-speed dual-clutch transmission.
6
1
Share

How to Turn Off the Rear Wiper of a Car?

To turn off the rear wiper of a car, simply move the wiper lever located below the steering wheel to the 'off' position. Pressing it down one notch will turn it on. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. The replacement method for the car's rear wiper is as follows: 1. Lift the wiper up; 2. Press the clip underneath to remove the wiper blade; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and once you hear a click, the replacement is complete.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.