Should the 8th Generation Accord Use 92 or 95 Octane Gasoline?

Where is the Bora water temperature gauge located?

Bora water temperature gauge is located on the car dashboard. The function of the water temperature gauge is to display the temperature of the cooling system to prevent coolant boiling. The dimensions of the Bora are: length 4663mm, width 1815mm, height 1462mm, with a wheelbase of 2688mm, fuel tank capacity of 50 liters, trunk capacity of 506 liters, and a curb weight of 1320kg. The Bora features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.2T turbocharged engine producing a maximum horsepower of 116PS, maximum power of 85kW, and maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.

13

1

Share

How many liters of windshield washer fluid can a Fit hold?

The Fit can hold 2 liters of windshield washer fluid. The refilling method is as follows: 1. Use the wiper control knob to first spray out the old washer fluid; 2. After completely spraying out the existing fluid, open the washer fluid filler port and add a small amount of new washer solution; 3. Activate the washer spray again to flush out any remaining old fluid; 4. When no more fluid sprays from the nozzles during the second activation, refill with new washer fluid and securely close the cap. Taking the 2021 Fit Trend Edition as an example, its body dimensions are: 4109mm in length, 1694mm in width, 1537mm in height, with a wheelbase of 2530mm and a fuel tank capacity of 40 liters.

14

1

Share

Is the Toyota Corolla produced by FAW Toyota or GAC Toyota?

Toyota Corolla belongs to FAW Toyota. Toyota has two joint ventures in China, one is FAW Toyota, and the other is GAC Toyota. FAW Toyota is a joint venture between Japan's Toyota and China's FAW Group, with each holding a 50% stake. The models produced and operated by FAW Toyota include the Crown, Reiz, Corolla, Prado, and Land Cruiser, among others. The Corolla is positioned as a compact car, with 12 models currently on sale, featuring displacements of 1.2T/1.5L/1.8L. The combined fuel consumption ranges from 4.0 to 5.6L. The 1.2T model is equipped with a 1.2-liter 4-cylinder turbocharged engine, delivering a maximum horsepower of 116Ps and a maximum torque of 185N·m. This engine features VVT-iW technology and direct fuel injection, with an aluminum alloy cylinder head and block. It is paired with a CVT transmission. The 1.5-liter model comes with a 1.5-liter 3-cylinder naturally aspirated engine, producing a maximum horsepower of 121Ps and a maximum torque of 148N·m. It is matched with either a 6-speed manual transmission or a CVT transmission. The 1.8-liter version is a hybrid model, powered by a 1.8-liter 4-cylinder naturally aspirated engine with a maximum horsepower of 98Ps and a maximum torque of 142N·m. This engine is equipped with multi-point fuel injection technology and an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power output of 53kw and a maximum torque of 163Nm. It is paired with an E-CVT transmission. The Corolla's front suspension uses a MacPherson strut independent suspension, while the rear suspension employs an E-type multi-link independent suspension, which enhances the vehicle's handling and ride comfort.

14

4

Share

Can Cleaning Fuel Injectors Save Fuel?

Cleaning fuel injectors can indeed save fuel. The performance of fuel injectors plays a fundamental role in the power output of every engine. Poor fuel quality can lead to malfunctioning injectors, causing severe carbon buildup in the cylinders, accelerated wear of cylinder liners and piston rings, resulting in unstable idling, increased fuel consumption, poor acceleration, difficulty starting, and excessive emissions. Therefore, cleaning the injectors is necessary when they exhibit any of these symptoms, but excessive and frequent cleaning can also have negative effects. Below are the main reasons for injector sticking: 1. Contaminated diesel fuel or impurities in the high-pressure fuel lines can prevent the needle valve from sealing properly, allowing high-pressure combustion gases to backflow and damage the needle valve assembly. Additionally, dirt from the injector's pressure-regulating spring or tappet can migrate to the upper part of the injector needle valve, or sealing materials like cotton rope or lead wire from the fuel lines can enter the injector, causing the needle valve to stick. 2. Overheating due to poor injector cooling can cause the fuel delivery valve to stick. Factors such as delayed fuel delivery, excessive scale or blockage in the cooling passages, worn water pump impeller, or prolonged engine overload can lead to engine overheating. 3. Wear of the fuel delivery valve can cause fuel dripping when the injector stops spraying, leading to injector coking and sticking. 4. Missing or damaged gaskets during injector installation can cause air leaks, leading to localized overheating and injector sticking. 5. Low injection pressure can result in backflow of high-pressure combustion gases from the combustion chamber.

3

1

Share

How many kilometers should the Leiling gasoline filter be replaced?

The Leiling gasoline filter should be replaced every 20,000 to 30,000 kilometers. The replacement method is as follows: 1. Close the inlet valve of the gasoline filter, unscrew the end cover bolts, and open the end cover; 2. Open the drain valve to completely drain the dirty oil; 3. Loosen the tightening nut at the upper end of the gasoline filter and remove the old filter vertically upwards; 4. After replacing the gasoline filter, close the drain valve and tighten the end cover bolts. The Leiling has a body length, width, and height of 4640mm, 1780mm, and 1455mm respectively, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 471 liters. It is equipped with a 1.2T turbocharged engine with a maximum torque of 185Nm, a maximum horsepower of 116PS, and a maximum power of 85kW, paired with a 10-speed continuously variable transmission.

10

0

Share

How Long Can a Spare Tire Be Used?

An automobile spare tire can be used for no more than 100 kilometers. A spare tire is not designed for long-term use and should only serve as a temporary replacement while the original tire is being repaired. The reasons are as follows: the four tires have different friction coefficients, ground adhesion levels, and air pressures. Prolonged use of a spare tire can negatively impact the vehicle's braking system, steering system, and suspension system, posing potential safety hazards. It may also cause uneven wear on the other tires in the same direction. Precautions for using a spare tire include: 1. Proper positioning of the spare tire; 2. Protecting the spare tire from oil corrosion; 3. Knowing the spare tire's model; 4. Understanding the spare tire's service life; 5. Using a repaired spare tire on the rear wheels; 6. Paying attention to speed when using a spare tire.

7

1

Share

Should the 8th Generation Accord Use 92 or 95 Octane Gasoline?

Where is the Bora water temperature gauge located?

How many liters of windshield washer fluid can a Fit hold?

Is the Toyota Corolla produced by FAW Toyota or GAC Toyota?

Can Cleaning Fuel Injectors Save Fuel?

How many kilometers should the Leiling gasoline filter be replaced?

How Long Can a Spare Tire Be Used?

How Does a Manual Transmission Work?

What are the differences between the imported and domestically produced BMW 5 Series?

What is the oil specification for Changan CS55?

What does the exclamation mark and P on the dashboard mean?