···
Log in / Register

Should straight-going vehicles yield to left-turning vehicles or vice versa?

4 Answers
Valentina
07/28/25 5:47pm
Left-turning vehicles should yield to straight-going vehicles, and right-turning motor vehicles should yield to straight-going vehicles. Relevant explanations are as follows: 1. With traffic signs or markings: yield to the party with the right of way. 2. Without traffic signs or markings: stop and observe before entering the intersection, yielding to vehicles coming from the right. 3. Turning motor vehicles: yield to straight-going vehicles. 4. Right-turning motor vehicles from the opposite direction: yield to left-turning vehicles. Motor vehicles should use turn signals as follows: when turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal should be activated in advance; when turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, the right turn signal should be activated in advance.
Was this review help?
1
2
Share
MacAnnie
08/11/25 9:50pm
As a newly licensed driver, I once thought I could make it through a left turn and almost got hit by an oncoming straight-going vehicle. After that experience, I deeply understood the importance of yielding to straight-going traffic when turning left. Straight-going vehicles move fast and in a direct path; failing to yield can easily lead to serious collisions, especially at intersections without traffic lights. Now, I always slow down and stop before making a left turn, ensuring it's safe before proceeding. New drivers should pay extra attention—these rules are designed to protect everyone. Regularly reviewing traffic knowledge and practicing defensive driving can significantly reduce risks. Remember: safety first, and don't hesitate to yield when turning left.
Was this review help?
12
5
Share
Expand All
McSophia
09/30/25 2:41am
After twenty years of driving, I have always adhered to the principle of yielding to oncoming traffic when making a left turn. This is not without reason—straight-moving vehicles have the right of way due to their higher speed and greater potential danger. Forcing a left turn could trigger chain collisions or side impacts. At intersections, I always patiently wait for all straight-moving vehicles to pass before proceeding—this not only follows traffic rules but also safeguards the safety of myself and others. Cultivate the habit of slowing down in advance and avoid distracted driving. In short, rules stem from experience; never take risks for the sake of speed.
Was this review help?
11
2
Share
Expand All
LilaMarie
11/13/25 4:32am
Simply put, traffic regulations clearly require left-turning vehicles to yield to straight-going traffic. This is based on the priority of straight-moving directions, and turning vehicles must ensure the road is clear. I've seen too many accidents caused by people ignoring the rules, even harming innocent bystanders. At intersections without traffic signals, it's especially important to watch out for straight-moving traffic and never take chances. After years of driving, I've learned that safety lies in the details—cultivating the habit of cautious turning can prevent disasters. Remember this: rules never go out of style.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

How to Remove and Install the Wiper Blades on Nissan Qashqai?

Nissan Qashqai wiper blade removal and installation method is as follows: 1. Push the wiper towards the front of the vehicle to the fixed position with slightly more force. Press the fixing button device of the wiper blade, hold the wiper blade at the same time, shake it upwards, and remove the wiper blade. 2. Open the two small buckles of the wiper to remove the old rubber strip. 3. When installing the prepared new rubber strip, use your fingers to spread the two metal pieces and insert them into the first groove. Do not install both sides at the same time, but do it side by side. 4. After the new rubber strip is successfully installed, follow the reverse order of the disassembly process to smoothly reinstall the wiper.
13
4
Share

How long does it take to fully charge a car after starting it?

It takes about half an hour of driving to fully charge the car battery after starting. Here is some related knowledge about car charging: 1. Purpose of charging: The electricity in the battery is mainly used to start the car, which consumes a significant amount. However, once the car is running, the battery no longer consumes electricity. 2. Precautions: While the car is running, the generator charges the battery, so there is rarely a need for dedicated charging. But if the battery is severely depleted due to an accident, it should be charged promptly and not rely solely on the car's own charging system. Generally, after the car engine is turned off, the switches of related equipment in the car should be closed in time, otherwise it may cause severe battery depletion.
14
5
Share

How to Flatten the Rear Seats in the GS4?

Here are the steps to flatten the rear seats in the Trumpchi GS4: 1. Locate the release handle in the middle of the backrest. 2. Pull the handle outward to flatten the seat. Below is additional information about the Trumpchi GS4: 1. The Trumpchi GS4 measures 4545mm in length, 1856mm in width, and 1668mm in height. 2. It has a wheelbase of 2680mm, a minimum ground clearance of 190mm, and a fuel tank capacity of 50 liters. 3. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW and a maximum torque of 265 Nm, paired with a 6-speed manual transmission.
18
4
Share

What does Corolla Dual Engine refer to?

Toyota Corolla Dual Engine sedan means it has two "engines" that jointly drive the vehicle, namely a gasoline engine and an electric motor (hybrid). Below is more information about Corolla Dual Engine: 1. The Corolla Dual Engine has a body length of 4630mm, width of 1775mm, height of 1485mm, and wheelbase of 2700mm. 2. The Corolla Dual Engine is equipped with a 1.8L Atkinson cycle engine with the model code 8ZR-FXE. 3. The Corolla Dual Engine features a highly distinctive and advanced exterior design. The front fascia adopts slim LED headlights and "lightning-shaped" LED position lights, combined with chrome trim strips featuring both glossy and matte textures, presenting a premium feel.
8
2
Share

What is the Giulia?

Giulia is Alfa Romeo's first model introduced in China, positioned as a mid-size sedan. Here are the relevant details: 1. The first-generation Giulia, codenamed 105, was Alfa Romeo's main model from the 1960s to the 1970s. The current Giulia, codenamed 952, is a key product of FCA's "Alfa Romeo Revival Plan" and marks AR's return to a longitudinal engine rear-wheel-drive platform after more than two decades. 2. The Giulia is built on FCA's Giorgio platform, measuring 4643mm in length, 1436mm in height, with a wheelbase of 2820mm.
3
2
Share

Where is the relay located in the Venucia T90?

The relay in the Venucia T90 is located inside the engine hood, near the battery or inside the black box above the left and right front shock absorbers. Here is some information about relays: 1. A relay is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the input quantity (excitation quantity) changes to meet specified requirements. 2. A relay is an automatic switching component with isolation function, widely used in remote control, telemetry, communication, automatic control, mechatronics, and power electronic equipment, making it one of the most important control components.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.