Should private cars use water-based or dry powder fire extinguishers?

1 Answers
DiCaroline
07/29/25 6:37pm
Both have their own characteristics and are suitable for vehicle use. You can choose according to your specific needs. Below is a detailed introduction to dry powder and water-based fire extinguishers: 1. Dry powder fire extinguisher: It relies on the chemical inhibition reaction of volatile decomposition products of inorganic salts in the dry powder to extinguish fires, or the dry powder particles fall on the surface of combustible materials to isolate oxygen and extinguish the fire. Dry powder fire extinguishers are fast and effective, inexpensive, cost-effective, and widely applicable, but they produce a lot of dust and are somewhat difficult to operate. 2. Water-based fire extinguisher: It sprays fire-extinguishing agents to evaporate heat from the fire scene, rapidly reducing the temperature of the fire scene and inhibiting thermal radiation. Surfactants quickly form a water film on the surface of combustible materials, isolating oxygen and providing both cooling and isolation effects while participating in fire extinguishing, thus achieving rapid fire extinguishing. Water-based fire extinguishers are dust-free, anti-suffocation, have good fire extinguishing effects, and are non-toxic and environmentally friendly, but they are more expensive.
Was this review help?
19
2
Share
More Forum Discussions

What is the purpose of the shark fin on a car?

The shark fin on a car primarily serves functions such as signal reception, static electricity discharge, air disturbance, and decoration. The shark fin-style car antenna has continuously evolved in modern development, integrating various powerful automotive electronic functions like FM, GPS, and GSM. Its built-in structure effectively prevents antenna theft, enhancing safety and security. It also cleverly combines aerodynamic principles with aesthetic design, effectively reducing airflow noise. Signal Reception: Generally, the shark fin on the car roof contains an electronic signal transmitter. The car's navigation system locates the vehicle through the equipment inside the shark fin. Additionally, it can provide signals for devices like the car radio and Bluetooth, enhancing signal strength. Static Electricity Discharge: The shark fin on the car roof can discharge static electricity inside the vehicle in dry environments, avoiding unnecessary issues caused by static. Besides the shark fin, static electricity can also be discharged from the car's rear to the road using a metal chain. Air Disturbance: The shark fin on some performance cars can create air disturbance, aligning with aerodynamic principles. It helps press the car onto the road at high speeds, improving stability.
18
1
Share

How to Choose Between the New Sagitar and Corolla?

It is well-known that most of Corolla's engines are better than the Sagitar's EA211, with the advantage of being more refined and having lower fuel consumption compared to average cars. In terms of transmissions, technically, the Corolla's CVT transmission is superior to the Sagitar 1.6's AT transmission, and it has its own merits compared to the Sagitar 1.4T's DCT transmission. The 1.4T DCT's advantage lies in high torque at low RPM, but for compact cars, the torque transmitted by the CVT is actually sufficient. If you prefer the 'stiff' driving feel of German cars, enjoy flexible acceleration, often go on long trips, and have comprehensive requirements for configurations, then choosing the Sagitar is definitely the right choice. If you prefer quietness, comfort, and cost savings, and most of your driving time is in congested urban areas, then the Corolla Hybrid will not disappoint you.
6
0
Share

How to cancel the exemption application submitted on 12123?

To cancel the application for the exemption mark on 12123, you can cancel it through the 12123 APP, visit the vehicle management office to cancel the application, or call the vehicle management office to cancel the application. Relevant details are as follows: Introduction to 12123: 12123 is a mobile APP where you can apply for an exemption mark. Exemption regulations: After the new regulations were introduced, non-commercial vehicles within 6 years can apply for online exemption. Although the vehicles are exempt from inspection for 6 years, it is still necessary to collect the annual inspection mark every 2 years. Many car owners apply for the exemption mark on the 12123 APP.
19
5
Share

What to Do When Push-to-Start Doesn't Work in Winter?

There are many reasons why push-to-start may not work in winter, and solutions vary depending on the issue. Below are the common reasons and solutions for failure to start: Steering wheel lock causing failure to start: When parking, if the steering wheel is not straightened and remains at a slightly larger angle (e.g., over 30 degrees), the steering wheel will automatically lock as an anti-theft measure. In this case, the key may not turn, preventing ignition. Solution: Apply force to turn the steering wheel while simultaneously turning the key to unlock the steering wheel, then attempt to start the car. Push-to-start may encounter a dead smart key battery: The key is inside the car, but the dashboard always displays a key matching error. This occurs because the smart key battery is dead, and the start system cannot detect the weak signal emitted by the key. Solution: Place the smart key directly on the start button, then press the button to start. If the remote key battery is dead or there is another issue preventing proper matching, insert the key into the emergency backup key slot and press the start button to start the car. New car not pressing the brake before push-to-start: For borrowed or newly purchased cars, push-to-start vehicles require pressing the brake pedal to ignite. Pressing the start button without pressing the brake only activates the car's electrical system but does not start the vehicle. Solution: Press the brake pedal first, then use push-to-start.
16
1
Share

What are the dimensions of the Buick Excelle?

The body dimensions of the Buick Excelle are as follows: Length (mm): The length is 4609mm. Width (mm): The width is 1798mm. Height (mm): The height is 1486mm. Wheelbase (mm): The wheelbase is 2640mm. Additional information: Background: The all-new Buick Excelle was officially launched on October 16, 2017, and for the first time introduced General Motors' new-generation 1.3T/1.0T Ecotec dual-injection turbocharged engines. In 2018, the Super Connected Edition was introduced, featuring an upgraded version of the Buick eConnect connectivity technology and a redesigned in-vehicle human-machine interface. Configuration: In terms of safety features, the 2018 new Excelle is equipped with the SBZA side blind zone warning system, TPMS intelligent tire pressure monitoring system, rear parking radar, Bosch ESP9.1 electronic stability control system, laser-brazed integrated roof, and electronic anti-glare interior rearview mirror.
2
4
Share

What is the difference between Volkswagen's 2.0T high-power and low-power engines?

There is no difference in the engine hardware. The high-power engine is primarily optimized for performance, while the low-power engine is optimized for fuel efficiency and cost. Below are the relevant details about power: Reason: The engine hardware is identical, but different performance levels are achieved by adjusting the ECU data, combined with variations in vehicle configurations to achieve different positioning for the entire vehicle. Turbocharged engines can control the turbocharger via the ECU to achieve different boost pressures, making it relatively simple to reduce power by lowering the boost pressure. Typically, such engines are designed for high power, and reducing power does not affect reliability. However, the low-power engine is not specifically optimized, so fuel consumption remains largely the same as the high-power version. Differences between high and low power: High-power and low-power versions also differ in their valve train structures. The low-power version, for better fuel economy, is equipped with a dual-cycle system. Simply put, by adjusting the entire valve train structure, it sacrifices some power at low RPMs to achieve better fuel efficiency, which the high-power version does not have. This may also affect many supporting systems, such as cooling system pipelines, cooling fans, engine motors, and the turbocharger.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.