Should New Cars Get Window Tinting?

2 Answers
DeDaniel
07/29/25 12:41am
In principle, most vehicle models don't require separate window tinting films, but the decision should ultimately be based on the owner's personal needs. Here are the reasons why cars may not need tinting: 1. Standard models: Generally, the glass in standard vehicles already provides some level of heat insulation and UV protection, though the effect isn't particularly noticeable. 2. Higher-spec models: These come equipped with heat-insulating glass that often has a slight greenish tint (commonly called "green glass"). More premium vehicles may additionally feature privacy glass for rear windows, which provides both heat insulation and UV protection.
Was this review help?
6
4
Share
ElainaFitz
08/12/25 4:54am
I just bought a new car recently and have been pondering whether to apply window tinting for several days. I feel that tinting can significantly enhance the driving experience—it keeps the car cooler during hot summer days and protects the leather seats and dashboard from sun damage and aging. On the other hand, it provides privacy, making it harder for outsiders to see inside, which suits urban living well. However, it's important to check local regulations, as some areas have restrictions on how dark the tint can be. Too dark a tint can impair nighttime visibility and increase the risk of accidents. I've heard that prices for tinting films range from a few hundred to several thousand, and it's advisable to choose reputable brands with a light transmittance of over 50% for better safety. Don't skimp on installation—go to a professional shop to avoid bubbles or peeling. Personally, I think it's worth the investment, especially when the car is new, as it offers long-term protection.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

Is It Safe to Drive When White Smoke Comes from the Front of the Car?

If the engine emits smoke with a burning smell, it is best not to continue driving. This situation is mainly caused by excessively high engine temperature, radiator failure, oil leakage, or friction of the clutch plates in the vehicle's transmission. Below are several reasons for white smoke emission: 1. Overheating of the engine: After the car is used under high-intensity overload conditions, the engine temperature will rise sharply, resulting in a large amount of white smoke accompanied by a burning smell. 2. Radiator failure: If the car's radiator malfunctions, the engine cannot dissipate heat effectively, leading to smoke emission. In this case, professional inspection and repair of the radiator are required. 3. Oil leakage: Oil leakage can also cause the engine to emit smoke with a burning smell due to high-temperature evaporation. A comprehensive inspection is necessary in such scenarios.
11
0
Share

Is DCT an Automatic Transmission?

DCT stands for Dual-Clutch Transmission, which is a type of automatic transmission. The term 'dual-clutch' refers to the dual-clutch transmission system, which essentially means there are two sets of clutches working simultaneously—one managing the odd-numbered gears and the other managing the even-numbered gears. This design aims to eliminate the power interruption issue during gear shifts in traditional manual transmissions, thereby achieving faster gear changes. Below is an introduction to dual-clutch transmissions: 1. Origin: Dual-clutch transmissions originated from motorsports. Their first practical application was in the early 1980s with the Porsche 962C and the 1985 Audi Sport Quattro S1 RC racing cars. However, due to durability and other issues, they were not widely adopted. It wasn't until 2003 that Volkswagen introduced the Golf equipped with a dual-clutch transmission, becoming the first automaker to bring this technology to the mainstream consumer market. 2. Advantages: The benefits of dual-clutch transmissions are evident, including high transmission efficiency, fast gear shifts, low production costs, compact size, and low fuel consumption, among others.
11
2
Share

What is the top speed of the BYD Han?

The top speed of the BYD Han is 200 kilometers per hour. The following is a related introduction about the BYD Han: 1. Introduction: The BYD Han is a flagship new energy model launched by BYD Auto in 2020, marking BYD's new energy vehicles moving towards the mid-to-high-end market. 2. Design: The BYD Han adopts the family design language of BYD's Dynasty series, inspired by the Chinese dragon, symbolizing not only speed and power but also leadership. The front face features a closed design method, which is simple and elegant. Unlike previous models, the new car transforms the dragon's mouth into a flat design, lowering the front stance and using horizontal lines to create a very low and sleek visual effect for the entire front end.
10
3
Share

What is the maximum wading depth of the Accord?

The maximum wading depth of the Accord is 300mm. The wading depth of the Accord is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Accord is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, be sure to turn off the automatic start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Follow the path taken by other vehicles and drive at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or the wheels and doors of other vehicles as reference points to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed and choose an alternative route instead.
7
5
Share

What are the symptoms of a faulty throttle pedal position sensor?

When an electronic throttle pedal malfunctions, symptoms may include abnormal noises when pressing the pedal or the pedal not returning to its original position. Most electronic throttle pedal failures are caused by internal throttle pedal sensor issues. If the throttle pedal sensor fails or is damaged, the malfunction indicator light will illuminate, and the ECU will be unable to detect the throttle position. This can lead to unstable idle speed, throttle sticking, unresponsive acceleration, and other issues, rendering the vehicle inoperable. The role of the electronic throttle pedal: As a key component of the electronic throttle control system, the performance of the electronic throttle pedal not only affects multiple vehicle performance indicators such as power, comfort, and fuel economy but also directly impacts driving safety. How the electronic throttle works: The electronic throttle uses a position sensor to transmit signals indicating the depth and speed of pedal depression. These signals are received and interpreted by the ECU, which then issues control commands. The throttle valve adjusts its opening angle accordingly, either quickly or gradually. Repairing the throttle pedal sensor: If the throttle pedal sensor fails, it should be inspected and repaired promptly. Remove the throttle assembly, locate the signal output wires corresponding to the sensor, and use a multimeter in resistance mode to measure the circuit. Move the pedal and observe changes in the meter readings to determine if there is a fault. Check the sensor wiring harness for breaks or disconnected connectors. If any damage is found, replace the component directly.
6
2
Share

Can Electric Vehicles Get Wet in the Rain?

Getting wet in the rain generally has little impact on electric vehicles. Most electric vehicles produced by reputable manufacturers come with decent waterproofing features. However, it is still advisable to minimize leaving electric vehicles exposed to rain outdoors to prevent water damage and avoid unnecessary losses. Measures to take when an electric vehicle gets wet in the rain: 1. Wash the car promptly: Rainwater carries sticky substances that can adhere to the car’s surface after evaporation, making them difficult to remove. Additionally, rainwater and mud splashed from the road can accumulate in the lower gaps of the vehicle, trapping moisture and increasing the risk of rust. 2. Brake system dewatering: Most car braking systems use dual-circuit vacuum-assisted hydraulic braking, and the brake fluid that transmits braking force is highly absorbent. If rainwater enters the brake fluid, it can lead to brake failure or complete loss of braking power. Therefore, it is essential to check the brake fluid during maintenance to ensure the safety of drivers and passengers. 3. Chassis maintenance: The chassis is vulnerable to impacts from splashed mud and stones, making it prone to moisture and rust. The wheel wells may even loosen or develop holes. Thus, it is crucial to clean and rust-proof the chassis. A single rust-proof treatment can last up to three months. 4. Paint care: Rainwater contains high levels of acidic substances, which can severely damage the car’s paint, potentially causing irreversible harm. During rainy seasons, owners should consider giving their cars a paint treatment. For a quick and simple solution, waxing can be applied. For longer-lasting and more effective protection, a glaze sealant can be used to minimize acid damage to the vehicle.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.